Why does the car keep making noise after being turned off?

2 Answers
Julianna
07/29/25 10:06am
The reason the car keeps making noise after being turned off is due to the engine cooling fan. After shutting off the engine, the electric fan continues to operate for a period to dissipate heat from the engine coolant circulation system. Below is an introduction to engines: 1. Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. The first external combustion engine was invented by R. Stirling in the UK (Scotland) in 1816 and later improved by Watt into a steam engine. 2. Applicability: Engines can be used as power generation devices or refer to the entire machine including the power unit (e.g., gasoline engines, aircraft engines). 3. Types: Types include internal combustion engines (e.g., gasoline engines), external combustion engines (e.g., Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.
Was this review help?
6
1
Share
Elliot
08/13/25 12:55pm
Last time my car kept buzzing after turning off, which really worried me. I asked a familiar car repair friend, and he explained that it might be the cooling fan continuing to run for a few minutes to help cool the engine, which is quite normal when the engine is hot; or it could be the metal in the exhaust system cooling and contracting, making a clicking sound, which doesn’t last long. But if the ticking sound persists, it might be the system warning of a low battery, or the anti-theft alarm misfiring. I personally checked under the hood and found no debris stuck in the fan blades; after a few minutes, the sound stopped. It’s advised not to walk away immediately after turning off the engine. If the sound continues, it’s best to visit a repair shop to avoid draining the battery. Regularly washing the car should include rinsing the radiator to prevent dust from causing the fan to overwork.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

Why does the steering wheel suddenly become lighter with no resistance feeling?

The sudden lightness and lack of resistance in the steering wheel are related to the power steering system. Currently, there are three types of power steering systems in vehicles: electric power steering, hydraulic power steering, and electro-hydraulic power steering. For vehicles equipped with hydraulic power steering, it is normal for the steering wheel to suddenly become lighter and lose its tactile feedback during acceleration. However, for vehicles with electric power steering or electro-hydraulic power steering, a sudden lightness and lack of tactile feedback in the steering wheel indicate a malfunction. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and corresponding installation clips or screw holes for the driver's airbag (DAB).
10
2
Share

How to Repair a Broken Rearview Mirror Pivot?

Repair methods for a broken rearview mirror pivot include: 1. Using specialized high-strength double-sided adhesive tape designed for rearview mirrors—simply peel off the protective strips on both sides; 2. Applying rearview mirror-specific AB adhesive, which requires mixing before use; 3. Utilizing UV-cured adhesive, which effectively bonds both plastic and metal materials. The rearview mirror is one of the critical safety components on a vehicle, aiding drivers in observing rear road conditions during reversing and monitoring the vehicle's surroundings while driving. Key considerations for adjusting the rearview mirror are: 1. Properly adjust your seating position before aligning the mirror surface; 2. For the left-side rearview mirror, position it vertically so the distant horizon is centered, and horizontally so the vehicle body occupies one-quarter of the mirror's surface area.
9
2
Share

What are the methods to increase the power of the Mazda6?

Methods to increase the power of the Mazda6 are: 1. Open the engine compartment, remove the rusted exhaust manifold, being careful to retain the previous gasket, which is the gasket between the exhaust manifold and the engine; 2. Replace it with a stainless steel exhaust manifold, install the turbo and header on the dedicated exhaust manifold, then prepare to install the intercooler piping and oil cooler piping. After installation, perform some professional adjustments. Taking the 2006 Mazda6 2.0L manual model as an example: it is a mid-size 4-door 5-seater sedan with a length, width, and height of 4670mm, 1780mm, and 1435mm respectively, a wheelbase of 2675mm, equipped with a 6-speed manual transmission, and a top speed of 211 kilometers per hour.
6
3
Share

How to Remove Rust Spots from White Car Paint?

White car paint rust spots can be removed by the following methods: 1. Clay bar: Most rust spots exist on the surface of the paint. A clay bar can be used to scrub them away. The clay bar is effective in removing stubborn stains from the car body. For white car paint rust spots, first wet the car body, then use the softened clay bar to evenly grind and wipe the rust spots, keeping the body moist; 2. Polishing; 3. Iron remover: Pour it onto the rust spots and wipe with a sponge, then rinse with clean water. Car owners should regularly maintain their vehicles, wash them promptly when dirty, and pay attention to paint care. Waxing, sealing, coating, and ceramic coating can all protect the car paint to a certain extent. Most rust spots on the car body are caused by acidic substances in rainwater carrying iron powder from the air, so it is important to wash the car body promptly after rain.
9
5
Share

How Often Should Air Compressor Oil Be Changed?

There are three scenarios for the replacement cycle of air compressor oil: 1. Mineral oil should be changed every 3 to 4 months; 2. Semi-synthetic oil should be changed every 6 to 8 months; 3. Full synthetic oil should be changed every 10 to 11 months. The oil should be changed in advance if the air compressor exhibits the following conditions: 1. The air in the location where the air compressor is placed contains many impurities; 2. The air contains corrosive substances; 3. The ambient temperature of the compressor room is high; 4. The air contains a large amount of dust. Oil is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers.
18
0
Share

Where is the transmission oil dipstick on the Santana?

The Santana does not have a transmission oil dipstick. When adding oil, unscrew the transmission oil filler plug, then unscrew the transmission drain plug to completely drain the oil from the transmission. Tighten the transmission drain plug, pour the oil into the oil press, connect the oil press hose to the filler port, and finally pump the oil press to allow the oil to flow into the transmission until it reaches the level just below the filler port. The Santana is a brand of cars produced by Volkswagen in California, USA. Its models include the Santana 87, Santana 2000, New Santana, Santana 3000, and Santana Vista Zhijun.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.