Why Does the Car Jerk When Releasing the Accelerator?

1 Answers
VonGrace
07/24/25 9:13pm
Car jerking when releasing the accelerator is most likely caused by inexperienced driving techniques or transmission abnormalities. Below are detailed explanations of the specific reasons for car jerking when releasing the accelerator. 1. Inexperienced driving techniques. Solution: Master the timing of gear shifting, coordinate the accelerator and clutch smoothly, avoid releasing the clutch too quickly when starting, and ensure not to drag the gears when downshifting to decelerate. 2. Car jerking when releasing the accelerator could be due to transmission abnormalities. Solution: First, check if the transmission fluid is low or has deteriorated. If the transmission fluid is normal, it is recommended to visit a professional repair shop or a 4S store for a diagnostic check of the transmission control system.
Was this review help?
3
1
Share
More Forum Discussions

Does Using the Fan When the Car is Off Drain the Battery?

Using the fan when the car is off does drain the battery. When the fan is used while the engine is off, the alternator is not working to recharge the battery, so the battery will deplete relatively quickly. If the fan speed is set to a lower setting, it may last for a short period, but if the battery is accidentally drained, the car may not start. Hazards of idling the car for extended periods: 1. Carbon buildup: Prolonged idling at low engine temperatures can lead to carbon deposits. Over time, these deposits can accumulate and partially clog the valves. Carbon buildup in the engine can cause difficulties in starting, reduced power, increased fuel consumption, and rough idling. 2. Increased fuel consumption: Extended idling while waiting also increases fuel consumption and expenses. Additionally, excessive exhaust emissions are harmful to the environment. 3. Reduced battery lifespan: During winter or summer, if passengers remain in the car, the heater or air conditioning may be used. Running the air conditioning for long periods while idling not only increases fuel consumption but also shortens the battery's lifespan.
3
4
Share

Is simulated driving practice mandatory for obtaining a driver's license?

Simulated driving practice is required for obtaining a driver's license. Here are key considerations during practice: 1. Overtaking and lane changing: Execute overtaking and lane changes decisively while maintaining close proximity to the preceding vehicle, particularly on bidirectional roads to minimize overtaking duration. Always thoroughly observe adjacent lane traffic via side mirrors - assessing both distance and speed of trailing vehicles. Lane changes should only occur when safety is confirmed, as the lane-changing vehicle bears full responsibility for collisions. 2. Engine sound monitoring: Abnormal noises occur during high-speed driving with low gears (gear dragging) or low-speed driving with high gears (accompanied by vehicle vibration). Typically, shift to 2nd gear after initial movement, then progress to 3rd gear at approximately 40 km/h. 3. Neutral gear usage: While coasting in neutral may be permissible at low speeds without compromising safety, fuel-injected vehicles experience significant fuel consumption. Never engage neutral gear downhill - this risks brake failure and potential vehicle control loss if the engine stalls.
2
1
Share

Why is the Bora Legend cheaper than the Bora?

Bora Legend is cheaper than Bora because its configuration is not as good as Bora's. Here are the specific details about Bora: 1. Background: Bora is a classic model under Volkswagen. The interior of the new Bora draws inspiration from the high-end model Magotan, featuring a simple and symmetrical design style that highlights stability and elegance. 2. Exterior: The new Bora adopts Volkswagen's family-style front face design, with layered headlights featuring a flying-wing design, creating a strong three-dimensional effect. Compared to the current model, the rear design has changes in the contour and light clusters, and the body lines are significantly different, becoming more streamlined. It also features newly designed aluminum alloy wheel styles. 3. Powertrain Configuration: In terms of configuration, after a simple comparison by the offline field editor, the new Bora differs from its sister model Lavida in the same class, but they are on par with each other. As mentioned earlier, the powertrain remains unchanged, and it is confirmed that the top model is still equipped with a 1.4TSI engine paired with a DSG transmission.
14
2
Share

Which country is Borgward produced in?

Borgward is a German brand, and imported vehicles are produced in Germany. Borgward has established a joint venture with Beijing Foton, and vehicles sold in China in the future are expected to be produced at the Beijing factory. Below is more information about the Borgward BX5: 1. The Borgward BX5 is a model built based on European 5-star safety standards, providing consumers with a reliable safety protection system that meets the highest safety standards. It continues the family design language of Borgward, with the front face showcasing a grand presence. 2. The vehicle's dimensions are 4490×1877×1675mm (length×width×height), with a wheelbase of 2685mm. The rear of the car features a full-bodied design, with refined tail lights on both sides and a black lower trim that gives the entire rear a sporty feel. The interior design adopts a simple and youthful style, with a traditionally symmetrical dashboard design, a 4.2-inch multifunctional LCD display, and a technologically advanced intelligent connectivity system.
18
5
Share

What should I do if I turn left when the straight lane is green but the left turn lane is red?

Turning left when the straight lane is green but the left turn lane is red will result in a fine of 200 yuan and 6 penalty points. Below is relevant information about driving at traffic light intersections: 1. Rules: When encountering a red light, vehicles (including bicycles, motorcycles, and electric vehicles) cannot proceed straight or turn left but can turn right. When encountering a green light, vehicles can proceed straight, turn left, or turn right (pay special attention to the direction arrow on the traffic light). When the directional light is green, you can drive in the direction indicated by the arrow on the traffic light. When the directional light is red, you cannot drive in the direction indicated by the arrow on the traffic light. 2. Red light explanation: Traffic lights, also known as traffic signal lights, are light signals that change colors at specified intervals. They are usually installed at intersections or other special locations to assign the right of way to vehicle drivers and pedestrians, regulating their movement and turns as traffic control facilities.
9
1
Share

How to Remove Adhesive Residue After Peeling Off Car Window Film?

After peeling off car window film, adhesive residue is often left behind, which can be removed using products like essential balm, makeup remover, or cleaning agents. Here are the details: 1. Window Film: Also known as heat insulation film or solar film, it blocks UV rays, reduces heat, and protects privacy. Car window film is approximately 0.037mm thick and comes in various types: dyed film, coated printed film, standard metal film, nano-ceramic film, precious metal film, and magnetron sputtered film. Dyed film is the lowest grade, while magnetron sputtered film is more advanced, offering better light transmission, heat insulation, longer lifespan, and no electromagnetic signal interference. 2. Four key parameters of window film include: light transmittance, heat insulation rate, shatterproof performance, and UV blocking rate. For light transmittance, it should not be less than 85%, and high-quality films generally block at least 98% of UV rays.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.