Why does the car fail to start only after each refueling?

1 Answers
LeElliana
07/29/25 12:18pm
Failing to start after each refueling may be due to poor gasoline quality. Here is some extended information about gasoline: 1. Development Background: In the mid-19th century, people did not yet recognize the importance of gasoline, and kerosene for lamps was widely used at that time. Petroleum refining relied on simple distillation processes to separate components with different boiling points from crude oil. Kerosene, with its higher boiling point, was safer for lamp use and became the primary product of crude oil refining, while gasoline and other components were often burned as fuel. 2. Carcinogenic Substances: On October 27, 2017, the International Agency for Research on Cancer (IARC) of the World Health Organization released a preliminary reference list of carcinogens, classifying engine exhaust and gasoline as Group 2B carcinogens.
Was this review help?
8
3
Share
More Forum Discussions

How old can a baby sit in a safety seat?

Babies can only sit up completely at seven months old, so babies can only sit in safety seats after seven months. Here is the relevant introduction to safety seats: Introduction: A car safety seat refers to a seat that is attached to a car seat and is a car accessory with restraint and protection functions. Generally referred to as safety seats, child safety seats, child car safety seats, and car protective seats, they all refer to safety seats. Function: Safety seats adopt ergonomic designs that conform to the physical characteristics of children, fully accommodating the physiological characteristics of children of different ages, making them exceptionally comfortable for children to sit in. At the same time, child safety seats are designed according to child psychology principles, using appropriate materials, patterns, and surrounding shapes to provide children with a sense of fullness and security of being surrounded.
17
2
Share

Why doesn't the seatbelt buckle pop out when it's broken?

If the car seatbelt buckle doesn't pop out when pressed, it may be due to prolonged use of the seatbelt, causing dirt accumulation inside the buckle. In this case, you can use a cleaning agent to clean the seatbelt buckle thoroughly. Here is some relevant information about seatbelts: Purpose and Materials: Seatbelts are safety components used in equipment, such as when riding aircraft or performing high-altitude work and acrobatics, to ensure safety. The main materials are polyester, polypropylene, and nylon. Seatbelts are not just the webbing; besides the webbing, they are assembled with other components. Types: Depending on the operation and wearing style, seatbelts can be classified as full-body harnesses or half-body harnesses. The parameters of seatbelts include working load (WS) and breaking load (BS). These parameters may vary according to different standards and manufacturers.
4
0
Share

How to activate cruise control in Cadillac ATSL?

Cadillac ATSL's cruise control switch is located on the left-hand side keyboard of the steering wheel. Press the ACC cruise button to activate cruise control. Here is some information about cruise control: Introduction: Cruise control is used to maintain a constant speed for the vehicle. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer. The computer continuously adjusts the fuel supply based on road conditions and the vehicle's driving resistance to maintain the set speed, eliminating the need for throttle operation, which reduces fatigue. It also minimizes unnecessary speed variations, thereby saving fuel. Cancellation method: Generally, cruise control is automatically deactivated when the driver presses the brake pedal or clutch.
15
4
Share

Is Steering Wheel Shifting Good?

Steering wheel shifting is excellent. With paddle shifters, when the vehicle is driving in D gear, the driver can manually force a gear shift with their fingers at any time. This operation is particularly useful when rapid acceleration is needed for overtaking. Here is a related introduction about steering wheel paddle shifters: Function: Paddle shifters are generally the shifting devices for some automatic transmission cars. Their function is to achieve gear shifting directly through the paddle shifters without going through the gear selector lever on the transmission. Location: Paddle shifters are usually located behind the steering wheel. When operating the paddle shifters, the driver generally only needs to push the gear into D, S, or manual mode. With paddle shifters, the driver can complete upshifting and downshifting operations without taking their hands off the steering wheel.
12
1
Share

How to Start a Car Correctly?

Starting on flat ground: Press the clutch, shift the gear lever to neutral, continue pressing the clutch, turn the key to the first position to allow the car to self-check. After the self-check is completed, continue turning the key to start the engine (while still pressing the clutch). Once the engine starts, since the clutch is already pressed, directly shift to first gear, slowly release the clutch, and when you feel the car slightly vibrating, gently press the accelerator to give some gas. When the front of the car slightly lifts, release the handbrake, and the car will start moving. Starting on a slope: Steps 1~4 are the same as starting on flat ground. Slowly release the clutch until you feel the car vibrating noticeably, then press the accelerator slightly harder. Note: At this point, more gas is needed compared to starting on flat ground because the car has to overcome not only the static friction from flat ground but also the work done by its own gravity. When the accelerator is pressed to the point where the car's front lifts noticeably, stabilize the accelerator and release the handbrake. Once the car starts moving, give a bit more gas while stabilizing the accelerator to ensure the car moves forward smoothly without rolling backward.
19
0
Share

What Does Motion Detection Mean on a Dash Cam

Motion detection typically involves identifying changes in images within a specified area, detecting the presence of moving objects, and avoiding interference from light. In simple terms, it means that when an object moves within the designated area, the system can automatically record and save the footage. The specific principles and considerations are as follows: Specific Principles: Motion detection, also known as motion sensing, is commonly used in unmanned surveillance or automatic alarm systems. Principle: Images captured by the camera at different frame rates are compared and calculated by the CPU using a fixed algorithm. When changes occur in the specified area, the system processes the data accordingly. Considerations: It is crucial for motion detection to extract changing regions from sequential images, separate them from the background, and effectively classify and track the target. Since background images can change during detection—due to factors like weather and lighting conditions—motion detection can be a challenging task. However, with technological advancements, this technique is gradually being implemented more widely.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.