Why does the car fail to accelerate when the air conditioning is turned on?

2 Answers
OKai
07/28/25 6:54pm
The reason why the car fails to accelerate when the air conditioning is turned on may be due to the oil pump overheating internally or in its circuit, resulting in poor working conditions, short circuits, or burnout, leading to insufficient or stopped fuel supply. It could also be caused by internal engine faults, improper internal maintenance, premature or abnormal wear, or issues with cylinder pressure and other potential faults or hazards. Relevant information about oil pressure is as follows: 1. Introduction: The residual pressure that lifts oil and gas from the bottom of the well to the wellhead through the oil pipe is called tubing pressure, or oil pressure for short. It is measured by the tubing pressure gauge, and its value is the flowing pressure minus the pressure of the oil and gas mixed liquid column in the well, friction resistance, and slippage loss. 2. Influencing factors: The oil pressure depends on the level of the flowing pressure, which in turn is related to the reservoir pressure. Therefore, the level of oil pressure reflects the energy level of the oil well.
Was this review help?
19
4
Share
DiLydia
08/12/25 12:18am
I've experienced this before - when the AC is on, the car feels sluggish during acceleration, as if being held back. The main reason is that after the AC compressor kicks in, the engine has to divert additional power to cooling, which increases the load. If the engine itself isn't in top condition, such as having dirty spark plugs or excessive carbon buildup leading to low ignition efficiency, the added burden from the AC will make the power deficiency more noticeable. Also, if the air filter is clogged and airflow is restricted, it can cause incomplete fuel combustion resulting in poor acceleration. I remember last time with my own car, it was the same issue - after inspection, we found the fuel pump wasn't delivering stable pressure, and couldn't keep up when the AC was running. I'd suggest paying more attention to spark plug and air filter maintenance during regular servicing, and replacing the fuel filter periodically to prevent compounding issues. Using AC in summer is inevitable, so catching these minor problems early can save a lot of hassle.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What are the penalty point regulations for speeding?

Below are the detailed explanations of the penalty point regulations for vehicle speeding: 1. Exceeding the speed limit by more than 10% but less than 20%: A fine will be imposed, and 3 points will be deducted. 2. Exceeding the speed limit by more than 20% but less than 30%: A fine will be imposed, and 6 points will be deducted. 3. Exceeding the speed limit by more than 20% but less than 30%: A fine will be imposed, and 6 points will be deducted. 4. Exceeding the speed limit by more than 50% but less than 70%: A fine will be imposed, 12 points will be deducted, and the driver's license will be revoked. 5. Exceeding the speed limit by more than 70%: A fine will be imposed, 12 points will be deducted, and the driver's license will be revoked.
19
4
Share

Which cities currently allow registration of China V emission standard vehicles?

Cities where China V emission standard vehicles can be registered: Guangdong (excluding Guangzhou), Jiangsu (excluding Nanjing), Zhejiang (excluding Hangzhou), Sichuan (excluding Chengdu), Fujian, Guangxi, Ningxia, Hunan, Hubei, Xinjiang, and Yunnan, among others. Policies in some regions may change, so it's best to refer to local regulations before registering a China V vehicle. It is recommended to consult the local vehicle management office first. Below are the conditions for registering China V vehicles (some regions have a three-month "transition period" for new China V vehicles, and registration, modification, or transfer can be processed if one of the following conditions is met): 1. New China V emission standard light vehicles sold and issued with a unified motor vehicle sales invoice before June 30, 2019. 2. China V emission standard light vehicles that had completed transfer-out registration procedures outside the region before June 30, 2019, and are intended to be transferred into the Pearl River Delta region. 3. New China V emission standard light vehicles in dealer inventory with the vehicle product certification date or the completion date of import procedures indicated on the "Certificate of Imported Goods" for imported vehicles before June 30, 2019.
20
0
Share

Can a sedan drive on the Sichuan-Tibet Line?

Nowadays, sedans can drive on the 318 Sichuan-Tibet Line. Below is relevant information about whether sedans can travel on the Sichuan-Tibet Line: 1. Introduction to the Sichuan-Tibet Line: The Sichuan-Tibet Line, with a total length of 2,146 kilometers, has over 500 kilometers of expressways, including the Ya'an-Kangding Expressway and the Linzhi-Lhasa Expressway. However, due to the mountainous terrain, it is recommended to choose SUVs or off-road vehicles for better performance. 2. Overall road conditions on the Sichuan-Tibet Line are not ideal: First, the roads are steep with numerous high peaks. There are 15 major peaks to cross along the way, as well as continuous curves like those at Zheduo Mountain. Second, the road conditions are poor, often encountering mountain floods, mudslides, landslides, and falling rocks.
10
1
Share

In which year did China IV vehicles start production?

China IV vehicles started production in 2011. Vehicles compliant with China IV emission standards were manufactured between 2011 and 2017. Below is an introduction to China IV emission standards: 1. China IV emission standard is the national fourth-stage motor vehicle pollutant emission standard. It requires a 50% reduction in various emissions compared to China III. The China IV standard was implemented in 2011 and remained in effect until 2018 when the China V standard was introduced. 2. China IV emission standard requirements: Hydrocarbon emission values must be below 0.1g/km, carbon monoxide emission values below 1.0g/km, nitrogen oxide emission values below 0.08g/km, with no PM (particulate matter) requirements.
15
0
Share

Is the voltage measured from the cigarette lighter accurate?

There is always a slight error when measuring the battery voltage through the cigarette lighter, so it can only serve as an auxiliary tool for daily voltage reference. It is recommended to use a multimeter to directly measure the battery voltage for the most accurate results. When the vehicle is not started, the cigarette lighter uses power from the battery. After starting, it uses power from the generator. Here is some related information about the cigarette lighter: 1. Meaning of the cigarette lighter: The cigarette lighter is a component found in all cars, designed to provide a flame source for smokers. 2. Classification: The commonly referred-to cigarette lighter can be divided into those that draw power from the car's electrical system. Some manufacturers produce cigarette lighters not for lighting cigarettes but for drawing power from the car, which are also called cigar lighters.
7
4
Share

How to Calculate a Car's Fuel Consumption per 100 Kilometers?

Calculation method for a car's fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers equals fuel consumption (liters) divided by travel distance (kilometers) multiplied by 100. The fuel consumption per 100 kilometers indicated in the manuals of domestic cars is generally the constant-speed fuel consumption. Constant-speed fuel consumption refers to the fuel economy indicator when the car is driving at a constant speed on a good road surface. Several key technologies related to fuel consumption include three main aspects: 1. The relationship between vehicle weight and fuel consumption is directly proportional. For every 10% reduction in vehicle weight, fuel consumption will also decrease by several percentage points; 2. Car design: a smaller aerodynamic drag of the car body will significantly reduce fuel consumption, and the relationship between these two is also directly proportional; 3. Driving conditions are an important factor affecting fuel consumption.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.