Why Does the Car Door Make a Clunking Sound When Driving on Uneven Roads?

2 Answers
JamesRose
07/24/25 1:30am
The reasons why a car door makes a clunking sound when driving on uneven roads are: 1. There are foreign objects inside the door trim panel; 2. The trim panel or audio system is loose; 3. The door hinge is rusty; 4. The door sealing strip is aged; 5. Poor contact or insufficient lubrication of the door lock mechanism. The car door provides a passage for the driver and passengers to enter and exit the vehicle, isolates external interference, and to some extent reduces side impacts to protect the occupants. The solutions to the clunking sound of car doors on uneven roads are: 1. Adjust the gap size of the door; 2. Adjust the height of the door; 3. Adjust the tension of the door; 4. Replace the door sealing strip; 5. Apply an appropriate amount of grease on the surface of the arm rod; 6. Replace the door stopper.
Was this review help?
7
5
Share
RachelMarie
08/10/25 9:06pm
A rattling car door when driving on rough roads is quite common, and I think it could be caused by several factors. First, check the door hinges—if they're worn, aged, or rusted, the door may shake and make noise when bumping. Next, the door latch might not be tightly secured or could be loose, causing a creaking sound when the body shakes. Loose internal components in the door panel, such as clips, fastening screws, or window regulator mechanisms, can also lead to unusual noises. The rubber seals are another critical point—once they age and harden, the seal weakens, making the door loose. I recommend paying attention to where the noise occurs while driving and doing a simple check after parking: shake the door to see if it’s stable and inspect the rubber seals for damage. If the issue persists, take it to a repair shop for a thorough inspection—technicians can usually pinpoint the problem quickly and reinforce or replace the parts. Don’t underestimate the noise; ignoring it long-term could affect the door’s seal or safety.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What Are the Reasons for Car Sunroof Leakage?

Car sunroofs are prone to leakage due to the following reasons: 1. Lack of maintenance over time can cause the sunroof sealing rubber strip to age; 2. Driving on bumpy roads with the sunroof fully open can lead to significant vibrations between the sunroof and the sliding rails, causing component deformation; 3. Blocked drainage pipes. Methods to address sunroof leakage include: 1. Replacing the sunroof's rubber strip; 2. Cleaning small sand particles and dust from the sunroof drainage channel; 3. Ensuring the sunroof is properly closed; 4. Unclogging the drainage pipes. The function of a car sunroof is to provide ventilation. Maintenance methods include: 1. Regularly checking the condition of the sunroof guide rails; 2. Reducing the frequency of sunroof use; 3. Avoiding opening the sunroof when the car is cold in winter; 4. Checking the sunroof's drainage condition before the rainy season begins.
4
2
Share

What brand of engine is used in the Zhonghua H3?

Zhonghua H3 is equipped with an engine independently developed by Brilliance. The functions of the engine are: 1. To fully combust the fuel input into the cylinder and generate power; 2. To determine the vehicle's power performance, fuel economy, stability, and environmental friendliness. Taking the 2017 Zhonghua H3 as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4640mm in length, 790mm in width, and 1445mm in height, a wheelbase of 2660mm, and a fuel tank capacity of 50 liters. The 2017 Zhonghua H3 features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is powered by a 1.5L naturally aspirated engine with a maximum horsepower of 112 PS, a maximum power output of 82 kW, and a maximum torque of 145 Nm, paired with a 5-speed manual transmission.
1
0
Share

Where is the battery located in a Corolla?

The Corolla's battery is located next to the engine. The functions of the battery are: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system; 2. When the engine is stopped or at low idle, it powers the vehicle's electrical equipment; 3. When the generator's output is insufficient, it can assist in powering electrical devices; 4. It mitigates voltage surges in the electrical system to protect the vehicle's electronic equipment; 5. It can store excess electricity generated by the alternator. Taking the 2021 Corolla as an example, it belongs to the compact car category with body dimensions of: length 4635mm, width 1780mm, height 1455mm, wheelbase 2700mm, fuel tank capacity 50 liters, trunk capacity 426 liters, and curb weight 1335kg.
17
0
Share

When does the first maintenance period start?

The first maintenance period starts from the day the vehicle is delivered. The purposes of the first maintenance are: 1. To ensure the vehicle's optimal performance; 2. To improve driving safety; 3. To reduce engine noise; 4. To extend the vehicle's service life. Precautions for the first maintenance include: 1. Making an appointment in advance; 2. Recording any malfunctions or questions encountered while driving and informing the staff during the maintenance registration. The items covered in the first maintenance are: 1. Replacing engine oil and oil filter, cleaning the air filter, and checking for damage to the generator belt and wiper blades; 2. Checking the levels of various fluids; 3. Checking tire pressure and for any irregular wear, bulges, or damage; 4. Inspecting the vehicle's chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verifying the functionality of all switches and lights.
12
5
Share

How Often Should Wiper Blades Be Replaced on a New Car?

Wiper blades on a new car should typically be replaced every two years. The function of wiper blades is to remove rain and dust from the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. Methods for maintaining wiper blades include: 1. Using windshield washer fluid to clean the front windshield; 2. Regularly cleaning or replacing the wiper blades; 3. Replacing components of the linkage mechanism. The steps for replacing wiper blades are as follows: 1. Lift the wiper blade upright; 2. Press the clip underneath to remove the wiper blade rubber; 3. Take off the wiper blade; 4. Pry up the front end of the middle clip; 5. Insert the wiper blade into the middle clip, pull it tight by hand, and once a clicking sound is heard, the replacement is complete.
2
3
Share

Is the Brilliance Zhonghua V7 equipped with a BMW engine?

Brilliance Zhonghua V7 is powered by a BMW engine. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. Taking the 2019 Brilliance Zhonghua V7 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4702mm in length, 1932mm in width, and 1753mm in height, a wheelbase of 2770mm, and a curb weight of 1695kg. The 2019 Brilliance Zhonghua V7 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 204PS, a maximum power of 150kW, and a maximum torque of 280Nm, paired with a 7-speed dual-clutch transmission.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.