Why does the car cross the right line when reversing into the parking space?

2 Answers
KaydenFitz
07/28/25 10:53pm
The reasons for crossing the right line when reversing into the parking space include: 1. The starting point of the right parking space is too far from the left edge line of the parking area. 2. Turning the steering wheel to the right too early at the starting point. 3. Failing to accurately determine the point to start turning the steering wheel. 4. Misjudging the 30 cm distance when reversing into the parking space. 5. Adjusting the direction too late or driving too fast. 6. The steering wheel adjustment is too slow to correct the direction in time. There are three common types of reversing: 1. "Non"-shaped: The first type is the "non"-shaped reversing into the parking space, commonly seen in various large shopping malls. 2. "One"-shaped: The second type is the roadside "one"-shaped reversing into the parking space, also known as parallel parking. 3. Diagonal-shaped: The third type is the less common diagonal-shaped reversing into the parking space.
Was this review help?
15
3
Share
LeJayla
08/12/25 3:20am
When reversing into a parking space, I often encountered the issue of the right side crossing the line when I was first learning to drive. The root cause was improper timing in steering wheel operation. For example, if you don't adjust the car's position properly at the starting point of reversing or turn the steering wheel a bit late, the rear of the car tends to veer to the right. Incorrectly adjusted rearview mirrors also add to the trouble—if the mirror angles aren't set right, it's hard to see the right-side line and wheels clearly, leading to misjudgment. Speeding is another issue; moving too fast makes it hard to react in time, and before you know it, the wheels might graze the line. I recommend beginners practice slow reversing in an empty spot more often and have a friend help watch the position. After several repetitions, you'll find the key point for turning the steering wheel: when the angle between the car body and the line in the rearview mirror looks right, turn the wheel promptly. If you cross the line, don't panic—stop, adjust, and try again. With more practice, you'll develop good habits and avoid losing points during the test.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What does the maintenance light of Zotye mean?

Zotye's maintenance light is a reminder for the owner to perform maintenance. Taking the Zotye T600 as an example, here are the specific details of the Zotye T600: Vehicle Positioning: The Zotye T600 is positioned as a mid-size SUV, with a length of 4631mm, a width of 1893mm, a height of 1694mm, and a wheelbase of 2807mm. Power: The Zotye T600 is equipped with a 1.5L turbocharged engine, featuring continuous variable valve timing technology, with a maximum output power of 162 horsepower (119kW)/5500rpm and a peak torque of 215 N·m/2000-4000rpm. The entire series is matched with a 5-speed manual transmission. Suspension: The Zotye T600 adopts a front MacPherson independent suspension and a rear multi-link with lateral stabilizer bar independent suspension.
4
1
Share

Steps for Replacing Brake Fluid in a Car

Below are the steps for replacing brake fluid in a car: Place the vehicle on a pit or lift it using a jack. One person should be under the car, remove the rubber dust cap from the bleeder valve, attach a transparent hose to the bleeder valve and a waste fluid collection bottle, then use a wrench to loosen the bleeder valve screw counterclockwise. Meanwhile, someone in the car should repeatedly press the brake pedal. At this point, brake fluid will spray out from the bleeder valve. Pay attention to the fluid level in the brake fluid reservoir and add new brake fluid as the level drops. Once the fluid runs clear, tighten the bleeder valve screw. The person in the car should repeatedly press the brake pedal to its highest point and hold it down without releasing. The person under the car should loosen the bleeder valve screw, wait until the brake fluid is completely expelled, then tighten the screw and notify the person in the car to release the pedal. Repeat this process several times until no air bubbles are visible in the expelled brake fluid. Monitor the fluid level in the brake fluid reservoir and add new brake fluid as the level drops to prevent air from entering the brake system. Repeat steps 1 to 3 for each wheel until all the brake fluid has been replaced.
18
2
Share

Should the throttle be released when upshifting during acceleration?

Here are two scenarios regarding whether to release the throttle when upshifting during acceleration: Manual transmission models: For manual transmission models, the throttle should be released when upshifting. Automatic transmission models: For automatic transmission models, there is no need to release the throttle. Below are extended details on the related content: Automatic: For automatic transmission models when upshifting, one method is the vehicle computer automatically upshifts, which can be completed without releasing the throttle. Manual: To upshift in manual mode, shift the gear lever to manual mode, push up to upshift, and pull down to downshift. Automatic transmission gear positions: P is the parking gear and also the starting gear; R is the reverse gear; N is the neutral gear; D is the drive gear also known as the forward gear; S is the sport mode; L is the low gear.
17
0
Share

What is the fuel consumption of the Ford Transit 2.8t?

The fuel consumption of the Ford Transit 2.8t is 7.6-9.7L per 100 kilometers. The following are some methods to reduce car fuel consumption: Enhance car maintenance: Car maintenance affects engine performance and driving resistance. According to statistics, poor maintenance can increase fuel consumption by 10% to 20%. Car owners should regularly go to car repair shops for routine maintenance, such as checking tire pressure, wheel alignment, adjusting the gap between brake friction pads and drums, lubricating various points on the car chassis, changing engine oil on schedule, and checking filters. Avoid sudden braking and acceleration: A smooth and steady driving style is the most fuel-efficient. During the starting phase, avoid stepping hard on the accelerator and accelerate smoothly. After reaching a certain speed, try to maintain a constant speed as much as possible. When driving in congested areas, also pay attention to the road conditions ahead to avoid sudden braking. This not only saves fuel but also extends the vehicle's service life.
10
4
Share

How to Reset the Maintenance Light on a 2019 Iveco Daily?

First, insert the vehicle key and start the car. Press the button on the right side of the dashboard, at which point the maintenance light will begin flashing. Press the button on the left side of the dashboard repeatedly. Continue pressing until the bottom row of the dashboard displays a negative number, then hold down the right button.
17
3
Share

How to Use the 2021 Regal Voice Control System?

If the Regal is equipped with a voice recognition control system, Regal owners can press the voice button on the steering wheel or activate it directly by voice command. It enables functions such as making phone calls, controlling volume, adjusting air conditioning, and querying routes.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.