Why does the car consume more fuel after a major overhaul?

How to Toggle Between High and Low Beams?

There are two methods to operate the high-low beam toggle lever: one is a rotary knob type, and the other is a lever type. 1. The rotary knob type is commonly found in Japanese cars. To switch from low beam to high beam, simply rotate the knob on the lever forward. 2. The lever type requires you to push the lever downward to switch to high beam. Here is some relevant information: 1. According to the Road Traffic Safety Law, when driving at night, drivers must alternate between high and low beams in situations such as sharp curves, slopes, overtaking, arched bridges, pedestrian crossings, and intersections without traffic signals. When intending to overtake at night, the driver should first turn on the turn signal and then use the high-low beam toggle to alert the vehicle ahead. 2. When passing through an intersection, drivers must use the high-low beam toggle to alert vehicles on both sides of the intersection. It is important to note that when driving in urban areas, low beams should be used instead of high beams. This is because high beams emit intense light that can dazzle the driver of an oncoming vehicle, compromising driving safety.

20

3

Share

How to Determine a Lack of Coolant?

Methods to determine a lack of coolant include observing the coolant warning light on the dashboard; checking the coolant reservoir; and inspecting the water level markings on the coolant overflow tank. Observe the coolant warning light on the dashboard. If it lights up, it is likely due to a lack of coolant, though it could also be caused by excessively high engine temperatures. Check the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and promptly add coolant. Inspect the water level markings on the coolant overflow tank. The coolant level should normally be between the maximum and minimum marks. To determine if coolant is lacking, check the markings—if the coolant is below the minimum level, it indicates a shortage. Coolant replacement intervals: For vehicles that operate for extended periods, such as taxis, high-quality coolant should generally be replaced annually. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foaming, which reduces the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding it. Long-life coolant can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the coolant, replace it promptly and clean the system.

17

0

Share

What brand of tires does the original GAC Trumpchi GS3 use?

The original tires of the GAC Trumpchi GS3 are from the brands Atlas and Giti, with tread patterns GitiComfort-F50 and Batman-A51. Below are the specifications of GAC Trumpchi tires: 1. 215/60R17: Giti tire Giti215/60R17-96H Comfort series GitiComfort-SUV520. The 2021 GAC Trumpchi GS3 base model 235T manual Jingku version uses 17-inch tires. 2. 215/55R18: Giti tire Giti automobile tire 215/55R18-95V Comfort series GitiComfort-520V1. The 2021 GAC Trumpchi GS3 models 270T automatic Hongdong version, Xuandong version, Jinxiang version, and Jinzhi version use 18-inch tires.

14

0

Share

Why do some vehicle licenses not have an archive number?

Motor vehicle license archive numbers have been canceled, so there is no archive number on the vehicle license. The motor vehicle registration certificate number serves as proof that the owner's vehicle is recorded in the traffic police department's vehicle management office. The vehicle's data information should be reflected in the motor vehicle registration certificate. Currently, the archive number on the vehicle license has been canceled, and the license plate number is used as the query number. Below is some information about the motor vehicle registration certificate: 1. Replacement for loss of registration certificate: If the motor vehicle registration certificate is lost, missing, or damaged, the owner should apply for a replacement at the local vehicle management office where the vehicle is registered. 2. Motor vehicle services: The owner can authorize an agent to handle various motor vehicle registration and services, except for applying for a replacement of the motor vehicle registration certificate.

19

2

Share

What should the car coolant temperature be?

Engine temperature is typically monitored by a coolant temperature sensor, hence the normal operating temperature of the engine is often associated with coolant temperature. Generally, the optimal engine coolant temperature is 90°C, but it varies under different operating conditions. In a cold engine state, it may be around 85°C, while in a warmed-up state, the coolant temperature can exceed 100°C. However, 90°C is commonly regarded as the normal coolant temperature for an engine, though in actual driving conditions, it may fluctuate around this value. Below is relevant information: When the coolant temperature reaches 90°C, it indicates that the engine's heat generation has stabilized. Both excessively high and low coolant temperatures can damage the engine. Low temperatures are detrimental to engine lubrication, while high temperatures increase the risk of engine self-ignition. During daily driving, it is important to monitor the coolant temperature indicator on the dashboard. If the red warning light illuminates, do not continue driving; it is advisable to pull over and allow the engine to cool down.

20

5

Share

Can Part-Time 4WD Switch Modes?

Part-time 4WD systems can switch modes. Vehicles equipped with part-time 4WD systems have control levers or buttons inside the cabin that allow the driver to switch modes. Part-time 4WD systems generally have three modes: high-range 4WD mode, low-range 4WD mode, and high-range 2WD mode. Below is an introduction to the relevant content: 1. When driving on normal paved roads: high-range 4WD mode and high-range 2WD mode can be used. 2. When driving on some off-road trails: low-range 4WD mode can be used, which increases torque at the wheels. After switching to low-range 4WD mode, the vehicle's escape capability and off-road performance can be improved.

10

5

Share

Why does the car consume more fuel after a major overhaul?

How to Toggle Between High and Low Beams?

How to Determine a Lack of Coolant?

What brand of tires does the original GAC Trumpchi GS3 use?

Why do some vehicle licenses not have an archive number?

What should the car coolant temperature be?

Can Part-Time 4WD Switch Modes?

What are the symptoms of a faulty car throttle body?

What is the PSA model?

What is the wheelbase of the Mercedes-Benz E-Class AMG four-door version?

Is the Mazda CX3 an imported model?