···
Log in / Register

Why Does the Car Central Control Screen Freeze?

3 Answers
JohnnyDella
09/05/25 4:00am
The central control screen freezing may be caused by prolonged usage leading to multiple programs occupying system memory, resulting in a crash. Simply press the restart button to reboot. If restarting doesn't work, you can use a toothpick or another hard object to press the RST hole (reset button) on the central control screen to restore it to its initial state, or reinstall the central control system. Some basic causes and solutions for central control screen freezing: Third-party software: Check if any new software has been downloaded recently. Freezing may occur due to unstable programs or insufficient memory. In this case, you need to free up some memory and uninstall the related software. Hardware damage: Inspect hardware components such as wiring, IC, motherboard, and screen. If any damage is found, drive the car to a 4S shop for maintenance or visit a repair shop for inspection. System update: If the car's system software is not updated to the latest version, it may cause the central control screen to freeze. If an update is available, simply upgrade the software version. Replace the navigation device: If none of the above methods work, it may be necessary to perform a car diagnostic and replace the navigation device with a new one.
Was this review help?
9
2
Share
Ava
09/17/25 4:33am
As a car enthusiast, I understand that a frozen infotainment screen is often caused by system overload or software bugs. In daily driving, you might encounter situations where the navigation map loads too much data, causing the system to freeze; or too many apps running in the background lead to insufficient memory and delays. I recommend first trying a forced restart: hold the power button for about 10 seconds, which often resolves the issue. If it happens frequently, it might be due to an outdated software version—updating to the latest official firmware can reduce lag. Additionally, high temperatures inside the car can cause the chips to overheat, triggering problems. Using sunshades or ventilation to keep the system cool when parked can help. Regularly clearing the screen cache and avoiding installing unofficial apps can prevent such issues. Developing the habit of waiting for the system to fully load after a cold start before operating it can also help avoid impatient clicks that add to the burden.
Was this review help?
8
3
Share
Expand All
LaJason
10/31/25 5:04am
I've encountered my car's central control screen freezing several times during my commute, causing the navigation to stop working and wasting a lot of time. Common causes include poor touchscreen response or accidental triggers due to dust accumulation; software conflicts, such as the car music app consuming too many resources, can also cause freezing. I've learned a useful trick: disconnect the car battery's negative terminal for a few minutes to reset the entire system. Alternatively, check the USB connection, as unstable current can disrupt internal circuits and worsen the problem. Try to avoid fiddling with screen options while driving; use physical buttons to adjust the air conditioning and music instead. If the screen freezes, don't poke it aggressively, as this can damage the hardware; instead, try shutting it down slowly and restarting. On hot days, opening the windows for ventilation and cooling can have a noticeable effect. Regularly visit a maintenance center for system scans to prevent minor issues from becoming major problems.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What are the solutions for a dent in the front bumper?

The solutions for a dent in the front bumper are: 1. Use hot water to heat the dented area, which can help pop the dent out; 2. Once the dent is restored to its original shape, immediately cool the area that was heated with hot water by applying cold water to allow the rubber to contract and recover; 3. Remove one of the car's screws, reach inside the bumper from the body, and push from behind to fix the dent. The functions of the front bumper are: 1. To absorb and mitigate external impacts during collisions, providing a cushioning effect to protect both the vehicle and the driver; 2. To harmonize with the vehicle's overall design, offering good decorative appeal.
4
1
Share

What is a car malfunction?

Car malfunction refers to the situation where the vehicle's systems, assemblies, components, or the entire vehicle lose their specified functions. The malfunctions include: 1. Engine failure to start: Battery damage, as the engine relies on the battery for ignition. Rust or leakage in the battery can prevent the engine from starting; 2. Poor idle operation: Unstable idle speed and engine shaking, which are related to faults or poor performance of components such as the fuel injector, oxygen sensor, air flow sensor, exhaust gas recirculation valve, etc.; 3. Car leakage: Including fuel leakage, oil leakage, coolant leakage, brake fluid leakage, power steering fluid leakage, lubricant leakage, refrigerant leakage, as well as electrical system leakage of battery fluid and electrical system short circuits.
3
3
Share

Can a new car be registered on Saturday?

New cars cannot be registered on Saturday. Below is relevant information about vehicle registration: Required materials: For registration, you need to bring the identity proof of the vehicle owner; proof of vehicle origin such as the purchase invoice; the vehicle's complete factory qualification certificate or import certificate for imported vehicles; vehicle purchase tax payment proof or tax exemption certificate; compulsory traffic accident liability insurance certificate, and other materials. Registration time: If all materials are complete and there are not many staff at the vehicle management office, the registration of a new car can be completed in one morning. Notes: The vehicle management office should, within two days from the date of accepting the application, confirm the vehicle, verify the vehicle identification number imprint, review the submitted proofs and certificates, and issue the vehicle registration certificate, license plate, driving license, and inspection qualification mark.
17
1
Share

Where is the Correct Position of the Steering Wheel?

The correct position of the steering wheel is in the middle directly below the car's dashboard. Here is a related introduction to the steering wheel: Function: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger-diameter steering wheel reduces the hand force required from the driver when turning. The steering intermediate shaft serves as a connecting component between the steering gear and the steering shaft, facilitating the standardization of the steering gear, compensating for errors during manufacturing and installation, and ensuring a more rational installation of the steering gear and steering wheel in the vehicle. Fault Diagnosis: Drive at a speed of 15 kilometers per hour on a relatively open road. While driving, turn the steering wheel left and right to check if it operates smoothly and whether there is any lack of return force. Also, observe if the vehicle deviates from its path when the steering wheel is released.
9
1
Share

How Many Years Can You Take the Driving Test?

You can take the driving test for 3 years. Below is the relevant introduction to the driving license test: Test Process: Applicants for a motor vehicle driving license must pass the following four subject tests: Subject 1 (Road Traffic Safety Laws, Regulations, and Related Knowledge Test), Subject 2 (Venue Driving Skills Test), Subject 3 (Road Driving Skills Test), and Subject 4 (Safe and Civilized Driving Knowledge Test). The test sequence is conducted in the order of Subject 1, Subject 2, Subject 3, and Subject 3 Theory (i.e., Subject 4, as there is no official term 'Subject 4'). Only after passing the previous subject test can the applicant proceed to the next subject test. Test Requirements: The Vehicle Management Office shall accept applications from those who meet the conditions for a motor vehicle driving license and arrange the test according to the scheduled date. The test sequence follows Subject 1, Subject 2, and Subject 3. Only after passing the previous subject test can the applicant proceed to the next subject test. After passing the Subject 3 Road Driving Skills Test, the applicant can then take the Safe and Civilized Driving Knowledge Test.
4
1
Share

What are the starting steps for an automatic transmission car?

The starting steps for an automatic transmission car are: 1. Insert the key and turn it to the second position (accessory power mode); 2. Press the brake pedal and push the start button to ignite the engine; 3. Shift the gear from P (Park) to D (Drive); 4. Release the brake pedal, and the vehicle will start moving forward slowly; 5. Gently press the accelerator pedal to begin accelerating. The parking steps for an automatic transmission car are: 1. Press the foot brake to stop the vehicle; 2. Shift the gear from D to N (Neutral); 3. Engage the handbrake; 4. Release the foot brake without turning off the power; 5. Press the foot brake again and shift the gear from N to P; 6. Release the foot brake and press the start/stop button to turn off the power.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.