Why Does the Car Brake Squeak on Rainy Days?

1 Answers
JulianLee
07/30/25 12:50am
Car brake squeaking on rainy days may be caused by fine sand adhering to the brake disc, brake system failure, or brake pad wear. Fine sand adhering to the brake disc: Water can carry fine sand that sticks to the brake disc. In humid weather or when there is a large temperature difference between day and night, condensation or rain can cause the brake disc to rust, forming tiny particles. Car brake pads can be categorized as hard or soft. Hard pads are more wear-resistant, but if there are tiny particles between the hard brake pad and the gray cast iron brake disc, it can produce a sharp squeaking sound. The noise will disappear once the particles are worn away by braking. Brake system failure: If the brake system malfunctions, it is necessary to visit a 4S shop or repair shop for inspection and maintenance. Brake pad wear: When the brake pad wears down to the wear indicator. If a hissing sound occurs every time you brake for several consecutive days, and the sound becomes louder and more frequent, it indicates that the brake pad is nearly worn out. Brake pads usually have some hard metal shavings embedded at the bottom intentionally. When these shavings are exposed, they produce a metallic hissing sound, alerting the driver that the brake pads are severely worn. At this point, the brake pads should be replaced.
Was this review help?
3
1
Share
More Forum Discussions

Where is the air conditioning switch for the Haval H6?

The A/C button located at the lower right corner of the Haval H6's center console is the air conditioning switch. Below are the specific details about the Haval H6: 1. Vehicle Positioning: The Haval H6 is positioned as a compact SUV, available in Blue Label and Red Label versions. 2. Powertrain: It is equipped with two engines: a 1.5T and a 2.0T. The 1.5T engine delivers a maximum power of 124kW and a peak torque of 285Nm, while the 2.0T engine offers a maximum power of 145kW and a peak torque of 355Nm. 3. CVVL Technology: The 1.5T engine features CVVL technology. CVVL technology primarily allows for the adjustment of valve opening and closing times, valve lift, and duration, ensuring the engine receives sufficient air intake under various operating conditions, thereby improving engine efficiency.
13
0
Share

Is the 1.5T Engine of the Equinox Powerful Enough?

Explorer 1.5L version has a maximum power of 124kw and a maximum torque of 250N·m. The following is a detailed introduction of the Equinox: 1. Vehicle Positioning: The Equinox is a mid-size SUV produced by SAIC-GM Chevrolet. The dimensions of the Equinox are 4652*1843*1684mm. 2. Powertrain: The Explorer offers two powertrain options: 1.5L and 2.0L, both equipped with turbocharged engines. The 1.5L version delivers a maximum horsepower of 169hp, with a maximum power of 124kw and a maximum torque of 250N·m. The 2.0L version delivers a maximum horsepower of 260hp, with a maximum power of 191kw and a maximum torque of 353N·m. 3. Transmission: The 1.5L Equinox is equipped with a 6-speed automatic transmission, while the 2.0L version comes with a 9-speed automatic transmission.
14
5
Share

Reasons for Engine Failing to Start Due to Overheating?

Excessive carbon deposits can cause the engine to fail to start when overheated. Fuel flooding phenomenon: Fuel injector dripping, after the engine is turned off, the injector's poor sealing causes fuel flooding, resulting in an overly rich air-fuel mixture, making it difficult to start. Insufficient pressure: Insufficient fuel pressure, mainly caused by fuel pump and fuel pressure valve failures. Sensor signals: Faults in the coolant temperature sensor and intake pressure sensor lead to incorrect sensor signals, causing the air-fuel mixture to be too rich or too lean. Ignition coil failure: Changes in resistance value cause the secondary voltage to be too low, making it difficult to start. Oxygen sensor failure: Unable to correct excessive fuel injection, resulting in an overly rich air-fuel mixture.
4
5
Share

What does dry battery 6mf5al mean?

Dry battery 6mf5al means: 6 indicates the battery has 6 single cells, M stands for maintenance-free, and F refers to valve-regulated lead-acid battery. When charging: For this type of battery during charging, simply connect the charger directly to the positive and negative terminals, then turn on the power. Some chargers have a minimum output current of 1 amp, in which case 1 amp current can be used for charging. The charging time should be between 5-10 hours. If the battery becomes noticeably hot (slight heating is normal), charging should be stopped. Dry cell: A dry cell is a chemical battery that uses a paste electrolyte to produce direct current (wet cells use liquid electrolytes). They are generally divided into primary and secondary batteries, being the most commonly used and portable batteries in daily life. They can be used in many electrical appliances. The most common dry cell is the zinc-carbon battery.
11
0
Share

What is the annual maintenance cost of an Audi A4?

Due to different usage habits and varying local fee standards, the maintenance cost of an Audi A4 cannot be determined. Below are the specific details about the Audi A4: 1. Powertrain: The Audi A4 is equipped with a 2.0T four-cylinder turbocharged engine, delivering a maximum horsepower of 252 and a peak torque of 370 Nm. It has a curb weight of approximately 1.68 tons. The 0-100 km/h acceleration time is 6.6 seconds, paired with a 7-speed dual-clutch transmission. It features a front-engine, all-wheel-drive layout and five-link independent suspension on both front and rear axles. 2. Features: The Audi A4 comes with tire pressure monitoring, ESP stability control, and autonomous emergency braking. It also includes front and rear parking sensors, keyless start, and keyless entry for all doors. The 12.3-inch full LCD instrument cluster offers a rearview camera, GPS navigation, in-car Bluetooth, smartphone connectivity, and voice control functions.
20
5
Share

How is the engine and transmission of the Geely Xingyue L?

Geely Xingyue L's engine and transmission are equipped with Volvo's Drive-E series engines. High and low power versions: There are two versions of the 2.0T engine with high and low power outputs, with maximum power of 218 horsepower and 238 horsepower respectively, and peak torque of 325 Nm and 350 Nm respectively. Chassis: The Xingyue L adopts front MacPherson and rear multi-link independent suspension, and is equipped with BorgWarner's sixth-generation four-wheel drive system. Transmission: The Xingyue L Thunder God Hi.X hybrid version is equipped with a 3-speed electric drive transmission DHT Pro, which can be regarded as an intelligent energy control hub. It has the intelligent regulation capability of DHT Pro's 3-speed large speed ratio range, allowing the engine and motor to always operate in the high-efficiency range, effectively reducing fuel consumption.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.