Why Does the Car Brake Make Abnormal Noises?

2 Answers
McPreston
07/29/25 5:14am
Car brakes make abnormal noises mainly due to the following reasons: 1. Use of low-quality or overly hard brake pads. If inferior or excessively hard brake pads are used, they will produce abnormal noises when rubbing against the brake discs during braking. 2. Presence of sand or foreign objects between the brake pads and discs. Due to the unique design of disc brakes, some sand or foreign objects may inevitably get between the brake pads and discs, causing abnormal noises during braking. 3. Severe wear of the brake discs. Using low-quality brake pads or having hard foreign objects between the brake pads and discs can lead to abnormal wear of the brake discs. 4. Brake pad warning. Some brake pads come with electronic warnings, while lower-end vehicles may use warning tabs. If the wear on the brake pads reaches the warning line, abnormal noises will be produced.
Was this review help?
16
3
Share
EmersynAnn
08/12/25 8:51am
If my car's brakes make squeaking or grinding noises while driving, my first thought is that the brake pads may be nearly worn out. When those metal pieces come into contact with the brake discs, they produce sharp noises, indicating it's time for a replacement. Additionally, foreign objects like small stones or dust trapped between the brake discs can also cause noise, especially after rain or in humid weather. It's normal for newly replaced brake pads to make slight noises during the first few hundred kilometers as part of the break-in process. However, if the noise persists or worsens, accompanied by reduced braking effectiveness, it's a sign to be wary of potential issues like wheel hub bearing problems or warped brake discs. Developing good habits, such as avoiding sudden braking to reduce wear and having a mechanic check the brake pad thickness every six months (replace if thinner than 3mm), is crucial. Safety is paramount—never take it lightly.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What are the causes of a bad crankshaft pulley?

The reason for a bad crankshaft pulley is poor lubrication, so regular maintenance is essential. A damaged pulley has a significant impact on the vehicle, leading to poor power performance, and the engine may produce unusual sounds when idling or accelerating. Below are relevant details: 1. The car belt is mainly installed between the engine crankshaft and components such as the camshaft, water pump, generator, air conditioning compressor, and power steering pump. 2. The function of the pulley: It drives the water pump, generator, and air conditioning pump. The water pump ensures the normal water circulation of the engine for cooling, the generator charges the battery to ensure the proper operation of various circuits, and the air conditioning pump (compressor) is used for the air conditioning system. 3. Advantages of belt pulley transmission: Belt pulley transmission can mitigate load impact; it operates smoothly with low noise and vibration; the structure is simple and easy to adjust; the manufacturing and installation precision of the pulley is not as strict as that of meshing transmission; it has an overload protection function; and the center distance between the two shafts can be adjusted over a wide range.
6
4
Share

What Causes Abnormal Noises While Driving?

Abnormal noises heard while driving can be attributed to the following specific situations: 1. Transmission noise. If the car makes abnormal noises while idling, and the noise disappears when the clutch is depressed, it indicates that the noise originates from a transmission malfunction. Transmission noise is generally caused by bearing or gear wear. 2. Engine compartment noise. It is normal for the engine to produce noise due to vibration, but there are exceptions, such as a sharp screeching sound, which is usually caused by belt slippage. There is also a sharp sound of dry metal friction, which is generally due to damage to the generator, water pump, or power steering pump bearings. 3. Steering wheel noise. If abnormal noises occur when turning the steering wheel left or right, it may be caused by a steering gear malfunction, usually due to friction from aging of the steering linkage and ball joint rubber sleeves. 4. Suspension noise. The suspension system operates continuously during driving, and the rubber bushings between the shock absorbers and various links will inevitably wear out. When the bushings age or fall off, abnormal metal impact sounds will be heard. If the shock absorber is damaged, abnormal noises will be heard on bumpy roads. 5. Tire noise. Abnormal noises caused by tires are mostly tire noise, possibly due to foreign objects embedded in the tread, tire tread deformation, bulging, severe wear, or even insufficient tire pressure. 6. Brake noise. This may be due to excessive wear of the brake pads, creating abnormal gaps. Improper material use of the brake disc causing deformation, or unqualified hardness, porosity, friction characteristics, and compression characteristics of the brake pads may all lead to abnormal noises. 7. Body noise. Body noise is the most common issue, usually due to insufficient body rigidity. Long-term aggressive driving can cause slight deformation of the body frame, with the most direct impact being abnormal impacts or friction between the doors and the body. Alternatively, abnormal friction in some welded or screw areas may also cause abnormal noises.
2
1
Share

How to Replace the Manual Gear Shift Knob of a 2009 Buick Excelle?

The method to replace the gear shift knob of the Excelle is to first remove the dust cover of the gear shift lever, then take off the clip under the gear shift knob, unscrew it counterclockwise, and finally install the new knob. Below is some relevant information: 1. The Buick Excelle is based on General Motors' global platform. Its prototype is the GM Daewoo Lacetti, and its exterior design comes from one of the world's top three automotive design companies. It integrates global advanced technology and sets a new standard for mid-size sedans. The Excelle's modern appearance features a sculpted European style and refined aesthetic elements. 2. The rear design of the Excelle perfectly interprets its dynamic and refined characteristics: the innovative C-pillar triangular window design makes the cabin appear longer and provides a broader view; the high-mounted brake light displays a six-petal leaf shape when braking; the vibrant integrated crystal rear lights echo the design of the front lights. The rear design combines modern visual aesthetics with practical functionality.
16
3
Share

Why does the idle speed not drop when the accelerator is released?

When the car starts and the accelerator is released, the idle speed may temporarily remain high for 1-2 minutes, which is a normal phenomenon. However, if the idle speed fails to drop for an extended period, it may indicate an engine issue. The specific causes are as follows: 1. Throttle valve malfunction. The throttle valve primarily controls the engine's air intake volume. A faulty throttle valve can cause errors in its opening degree, reducing sensitivity and preventing it from closing properly during idle, leading to abnormal idle speed and failure to drop when the accelerator is released. 2. Idle speed control valve malfunction. Located on the throttle body, the idle speed control valve adjusts the idle speed by controlling the air bypassing the throttle body when the throttle is fully closed during idle. A faulty idle speed valve can prevent proper idle speed adjustment, causing unstable idle and failure to drop. 3. Coolant temperature sensor malfunction. The coolant temperature signal is crucial for the engine control unit (ECU) to determine idle speed. A faulty sensor can send abnormal signals, disrupting the ECU's idle control function. If the ECU receives a coolant temperature value lower than the actual temperature, the engine idle speed will remain high, and the idle speed will not drop when the accelerator is released.
6
5
Share

What is the fuel consumption of BYD Song Pro DM without charging?

The official fuel consumption given for BYD Song Pro DM without charging is 3.8L/100km. More details about BYD Song Pro DM are as follows: 1. The dimensions of BYD Song Pro DM are 4650mm in length, 1860mm in width, and 1700mm in height, with a wheelbase of 2712mm, and it offers various styles and sizes of wheels to choose from. 2. It is equipped with BYD's latest DM-i (Super Hybrid System), which consists of a 1.5L Atkinson cycle engine, a drive motor, and an e-CVT coupling mechanism. The engine has a compression ratio of 15.5:1 and a thermal efficiency of 43%, with a combined fuel consumption of 0.9L/100km.
13
1
Share

Is the turn signal up-left and down-right?

It is incorrect to say the turn signal is up-left and down-right. Pushing the lever downward activates the left turn signal, while pushing it upward activates the right turn signal. Returning it to the middle position turns it off. Below are the correct usage methods for turn signals: 1. When overtaking, first signal left and then right. According to regulations, overtaking must be done from the left side, so the left turn signal should be activated first. After overtaking, when returning to the original lane, activate the right turn signal. 2. Signal left when entering a highway and right when exiting. This is because entering a highway involves turning left, while exiting involves turning right. Similarly, signal left when merging from an auxiliary road to a main road and right when moving from a main road to an auxiliary road. 3. No signal is needed when entering a roundabout, but the right turn signal should be activated when exiting. This is because vehicles must follow the flow when entering a roundabout, so no signal is required. The purpose of signaling right when exiting is to alert vehicles behind and oncoming traffic. This is a clear stipulation in the new traffic regulations. Previously, many drivers would signal left when entering a roundabout.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.