Why does the car air conditioning stop cooling after running for a while?

1 Answers
VonKingston
07/29/25 3:58pm
When a car's air conditioning stops cooling after running for a while, it is mostly due to the condenser being covered by pollutants, so regular cleaning is necessary. You can choose to clean it with an air gun or a water gun. Air gun cleaning is simple, relying on a high-pressure air nozzle to blow away the pollutants, but the downside is that it creates a lot of dust. Water gun cleaning involves using a water gun to wash away the pollutants, but it's important to ensure the water pressure is not too high and to maintain a certain distance. More relevant information is as follows: 1. Cleaning the condenser: If the condenser and filter inside the air conditioning system are too dirty, they need to be cleaned promptly. Many people are usually too lazy to clean the condenser, allowing dust to accumulate and thicken, leading to poor heat dissipation and severely affecting the cooling performance. 2. Clogged filter: Another reason could be a clogged air conditioning filter, which can cause the car's air conditioning to stop cooling. In this case, the filter should be cleaned. If the filter is severely damaged, it should be replaced with a new one. 3. Insufficient refrigerant in the air conditioning system: If the air conditioning still doesn't cool, it's likely due to insufficient refrigerant in the system. Since less refrigerant is sprayed from the expansion valve into the evaporator, the refrigerant absorbs less heat, resulting in poor cooling performance. In this case, refrigerant should be added. However, it's important to note that the refrigerant bottle should not be held upside down.
Was this review help?
6
0
Share
More Forum Discussions

Is It Normal for an Audi Engine Cylinder Head to Have Oil Leakage?

Audi engine cylinder head oil leakage is certainly not normal. Failure to address it promptly can lead to engine sensor malfunction and damage to the engine. Causes of Oil Leakage: The reasons for oil leakage may include valve cover oil leakage, engine timing cover oil leakage, loose or damaged oil pan drain plug, deteriorated drain plug gasket leading to poor sealing and oil leakage, oil filter leakage, engine oil pan leakage, or crankshaft oil seal leakage. Emergency Measures for Oil Leakage: If engine oil leakage is detected, it is recommended to first lift the vehicle, wipe off the oil traces on the engine, and then observe while the engine is hot or directly when cold to locate the source of the leakage. If the leakage is due to an aged oil pan gasket or a leaking drain plug, simple repairs may suffice. However, if the issue stems from a faulty crankcase ventilation system causing excessive pressure and oil leakage, targeted repairs will be necessary.
2
2
Share

Where is the Corolla 8NRU engine produced?

The Corolla 8NRU engine is produced in Japan, with the engine number starting with the letter U for Japanese imports. Introduction to engine power: The work done by an engine per unit time is called the engine's power. Corresponding to indicated work and effective work, it is referred to as indicated power and effective power (output power), with the difference between the two called mechanical loss power. Advantages of higher specific power: Higher specific power and specific torque are certainly better, indicating ample power reserves. However, if the car is equipped with necessary luxury features that reduce these values, it doesn't necessarily indicate more issues. The engine's power is not equal to the car's power, as there are intermediate losses in mechanical transmission. Additionally, designs that increase body thickness and weight for safety reasons can also lead to engine power loss. Therefore, a car with a small-displacement engine is not necessarily slower or performs worse than one with a high-power engine.
6
5
Share

What is the differential oil specification for the Prado?

The Prado differential oil specification uses 85W-90 gear oil. Introduction to differential oil: Differential oil is a lubricant specifically designed for the rear differential lubrication of rear-wheel-drive vehicles, effectively providing protection for the differential. The functions of differential oil are twofold: first, it forms an oil film on the gear meshing surfaces to lubricate and reduce friction resistance, thereby extending the lifespan of components. Second, it serves a cooling function by flowing to dissipate heat generated by friction pairs, providing a cooling effect. Differential oil replacement interval: It is recommended to replace the differential oil every 40,000 kilometers. Vehicles requiring replacement should follow the replacement interval specified in their maintenance manual, taking into account their driving conditions.
3
2
Share

Is Jaguar an Imported Car?

Jaguar is an imported car. Jaguar is a top luxury car brand used by the British royal family and is currently owned by India's Tata Group. Introduction to the Logo: Jaguar is a British luxury car manufacturer. Its logo features a leaping "jaguar," which is vigorous and fierce, combining form and spirit with a sense of modernity and visual impact. It not only represents the company's name but also conveys the power and speed of forward motion, symbolizing the car's ability to gallop across the world like a jaguar. Jaguar's Exterior: With stunning and sharp eyes, a sculpted appearance, meticulously polished bodywork, and unparalleled craftsmanship, Jaguar takes the concept of handcrafted luxury cars to the extreme. Like a piece of art transformed through space and time, it exudes a subtle and heartwarming charm after countless refinements, embodying the essence of traditional British car-making art—elegance, agility, and timeless sophistication.
13
5
Share

How many liters of engine oil should be added to a Mercedes-Benz S600?

The Mercedes-Benz S600 engine requires approximately 10 liters of engine oil. Engine requirements for oil: As a type of machinery, an engine has similar requirements for lubricating oil as general machinery, such as appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature properties. Functions of engine oil: The primary function of engine oil is lubrication. During the lubrication process, the oil is gradually consumed, and impurities and deposits may form, affecting lubrication efficiency. Engine oil also has a cleaning effect, but during cleaning, some residues may remain in the engine. Additionally, engine oil provides anti-rust properties, reducing oxidation. Cooling is another function of engine oil, but prolonged use can diminish its cooling effectiveness.
14
0
Share

Does the Lingdong have an anti-collision beam?

Lingdong has an anti-collision beam. Here is an introduction about the Lingdong's anti-collision beam: 1. Purpose: The role of the anti-collision beam is to reduce the vehicle's damage in low-speed collisions and lower repair costs. 2. Function: The significance of the front and rear anti-collision beams is that they are the first devices to bear the impact force in a vehicle. An important concept in passive vehicle safety is that force applied at one point is distributed throughout the body. When force is applied at a certain point, allowing the entire frame structure to bear the force can minimize the intensity of the force at that single point. The front and rear anti-collision steel beams play a very obvious role in this regard.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.