Why does the car air conditioning not cool after being exposed to the sun?

2 Answers
MacDiana
07/29/25 5:32am
The reason why the car air conditioning does not cool after being exposed to the sun is due to high pressure or overheating. The causes of high pressure or overheating are: 1. Excessive refrigerant: The refrigerant amount can be appropriately reduced. 2. Poor heat dissipation: Check if there is dust or dirt on the condenser pipe, and it is recommended to clean the condenser. 3. Blockage in the pipeline system: Refer to the pressure gauge for judgment and elimination, and reprocess the system. 4. Dust or scale accumulation on the evaporator or filter: This reduces airflow, causing imbalance in system pressure and temperature. It is recommended to clean the evaporator or filter. 5. Lack of refrigerant: When there is a lack of refrigerant, the compressor exhaust temperature will overheat, causing the overheating load protection switch to trip.
Was this review help?
18
1
Share
Maximilian
08/12/25 9:06am
Last month, my car was parked under the sun for half a day, and when I started the AC, it blew hot air, which was absolutely unbearable. Later, I went for a check-up and found that the refrigerant was insufficient, possibly because prolonged exposure to the sun caused changes in system pressure, expanding the leakage point. Additionally, the radiator surface had accumulated a lot of dust, preventing the heat from dissipating and greatly reducing cooling efficiency. I always neglect the AC filter, and when it's clogged, it also affects airflow. I recommend using a sunshade when parking in summer and opening the windows for a few minutes to ventilate before turning on the AC after exposure to the sun. Regular maintenance is crucial—check the coolant and filter every six months to avoid costly repairs on the road.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

How to reset the maintenance light on Audi Q5?

Audi Q5 maintenance light reset method is: 1. Open the MMI system menu, click the CAR button, and select Maintenance and Inspection by rotating the knob; 2. Press the knob to confirm and enter the next submenu, select Maintenance Interval; 3. Press the knob to confirm and enter the next submenu, follow the prompts to reset the maintenance interval. Taking the 2020 Audi Q5 as an example, it belongs to the midsize SUV category with body dimensions of: length 4753mm, width 1893mm, height 1659mm, wheelbase 2908mm, fuel tank capacity 73L, and curb weight 1855kg.
11
5
Share

Why is the ambient light not working?

Ambient light not working is due to a car circuit failure. Here are the specific details about ambient lights: 1. Activation: Ambient lights turn on when the engine is started and the surroundings are dim. 2. Function: They completely transform the appearance of the car interior at night, enhancing brand recognition. They ensure the interior is not too dark while driving, creating a pleasant driving environment and helping to prevent driver fatigue, thereby improving safety. 3. Modification: When modifying ambient lights, since it involves altering the car's original electronic circuits, it is essential to choose a reputable modification shop to avoid potential safety hazards due to quality issues later on.
3
0
Share

What is the function of the valve spring?

The function of the valve spring is to overcome the inertial force of the valve and its transmission components during the valve closing process. Below is an introduction to valve springs: 1. Purpose: To prevent gaps between transmission components caused by inertial forces, ensuring the valve promptly seats and tightly fits, preventing valve bouncing during engine vibration which could compromise its sealing. 2. Tool Introduction: The valve spring is located between the cylinder head and the spring seat at the end of the valve stem. Its function is to ensure the valve tightly fits against the valve seat or valve seat ring when closed, and to overcome the inertial force generated by the valve train during valve opening, keeping the transmission components always under cam control without disengaging from each other.
14
4
Share

What is the difference between slush molding material and hard plastic?

The difference between slush molding material and hard plastic lies in their hardness. Here is additional information: 1. Internal materials: Slush molding has a foam layer inside, making it less hard than hard plastic. The materials used in slush molding are different, resulting in higher manufacturing costs compared to hard plastic. The surface layer of slush molding material is made by heating polypropylene styrene, with a foam layer in the middle, while hard plastic is made from plastic materials. 2. Smoothness: The car dashboard uses hard plastic decoration. To save costs, the hard plastic dashboard has a stronger reflective texture and is smoother. If slush molding were used, the dashboard would not be as smooth.
7
5
Share

Where is the AUX interface in the Fit?

The Fit does not have an AUX interface. If you want to use an AUX interface in this car, you need to modify the CD player. Taking the 2021 Fit as an example, it is a compact car with the following dimensions: length 4109mm, width 1694mm, height 1537mm, wheelbase 2530mm, fuel tank capacity 40L, and curb weight 1088kg. The 2021 Fit features a MacPherson strut front suspension and a torsion beam rear suspension, with a front-wheel-drive layout. It is equipped with a 1.5L naturally aspirated engine, producing a maximum torque of 155Nm and a maximum power of 69kW, paired with a CVT transmission.
10
1
Share

Which car brand has a goat head logo?

The goat head logo belongs to the Dodge brand. Dodge's vehicle lineup includes models such as the Avenger, Caliber, Grand Caravan, Viper, and Journey. Taking the 2011 Dodge Caliber as an example, it is a compact SUV with the following dimensions: length 4415mm, width 1800mm, height 1535mm, wheelbase 2635mm, fuel tank capacity 51L, and curb weight 1475kg. The 2011 Dodge Caliber features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine producing 156 horsepower (156PS), with maximum power of 115kW and maximum torque of 190Nm, paired with a 6-speed continuously variable transmission.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.