Why does the car air conditioning cool in the morning and evening but not at noon?

1 Answers
LeElizabeth
07/30/25 3:18am
The reasons for the car air conditioning cooling in the morning and evening but not at noon are: first, the air filter is dirty; second, the condenser is dirty. The following are detailed explanations and solutions: 1. The simplest way to determine if there is a cooling problem is to measure the temperature at the air outlet. A temperature around 10°C is normal, but it varies significantly between different cars. Some cars can reach around 4°C, while others may only reach 8-9°C. 2. The air filter is dirty. A dirty filter leads to insufficient airflow. Even if the blower is set to a high speed and sounds loud, the actual amount of air blown out is minimal. Although the air is cool enough, the low volume of air can still cause the cabin temperature to remain high. 3. The air conditioning lacks refrigerant or the condenser is blocked. If the pressure is too low when the air conditioning is off and remains low when turned on, it indicates a refrigerant shortage, which can be resolved by recharging the refrigerant. If the pressure is normal, then a blocked condenser should be considered. In such cases, flushing is required. If the blockage is not severe, it can be resolved by simply rinsing with a water gun during car washing. Only severe blockages require disassembly and cleaning.
Was this review help?
11
3
Share
More Forum Discussions

What is the service life of a Passat battery?

Whether it's a maintenance-free battery or a conventional battery, the normal service life is around 2-3 years. With careful maintenance, it can last 3 to 4 years, equivalent to a driving mileage of 60,000 to 90,000 kilometers. If the battery cannot be charged or the starter is weak, and the headlights are noticeably dimmer, the battery should be removed and charged for 12-24 hours with a charger. Below are precautions for using the battery: 1. When the car lights are dim and red, the horn sounds weak, and the starter operates sluggishly: Stop using the battery immediately and charge it right away. Try to increase charging opportunities during use and keep the battery fully charged. In winter, ensure the battery remains fully charged to prevent the electrolyte from freezing due to low density, which could damage the battery. 2. If the first start attempt fails, avoid repeatedly trying to start the engine: From the perspective of automotive working principles, continuous starting of the motor will definitely cause excessive battery discharge and damage. The interval between subsequent start attempts should be more than 5 seconds.
6
2
Share

What are the reasons for Audi's oil burning?

Here are the reasons for Audi's oil burning: 1. Differences between domestic and international standards: When vehicles are produced domestically, modifications are made to suit the driving habits of Chinese consumers. During this process, oil burning issues may arise due to differences between domestic and international standards. 2. Carbon deposits: Carbon deposits easily form in the combustion chamber, and a large amount of carbon accumulates in the piston grooves. When the piston rings stick together, a sealing lock occurs, significantly reducing the oil seal's ability and blocking the oil holes, preventing normal oil circulation and increasing oil consumption. 3. Excessive clearance: This is also a condition that occurs during the production and design process. Audi's piston walls are very thin, making it easy for oil to enter the combustion chamber during operation. This leads to the main cause of oil burning. With oil present and a combustion method, oil reduction is inevitable. 4. Aging reasons: Corrosion and aging of the valve oil seals and aging of the front and rear crankshaft oil seals are also major causes of oil burning. Prolonged operation allows oil to enter the combustion chamber. Oil leaks further increase oil burning, and only regular inspection and replacement can solve this issue. 5. Other reasons: Damage to the oil seal between the turbocharger and intake pipe, high fuel content in the oil, clogged oil filter, clogged air filter, damaged or clogged exhaust valve, incorrectly installed piston rings, overfilled oil, and dirty throttle valves can all cause oil burning. Here are the solutions for oil burning: 1. Use high-quality oil: Oil is highly susceptible to corrosion and aging under prolonged high temperatures, causing the oil film to thin and more easily enter the combustion chamber to participate in combustion. Therefore, using high-quality oil can significantly delay this phenomenon. 2. Pay attention to the cleanliness of the fuel system: Carbon deposits are inevitably produced during fuel combustion, and carbon deposits are the root cause of some car failures, such as aging valve oil seals and increased piston-cylinder wall clearance, which are directly or indirectly related to carbon deposits. Therefore, keeping the fuel system clean is very helpful in preventing oil burning, although this requires the use of high-quality fuel additives. 3. Use external aids: As mentioned above, the cleanliness of the fuel system and the oil's anti-aging properties are key factors in preventing oil burning. Considering the current domestic fuel quality, it is necessary to use high-quality oil and fuel additives to achieve this, which is also the key to solving oil burning without disassembly and repair.
19
4
Share

Which types of car insurance are better to buy?

Here are some must-have insurances for cars: 1. Compulsory Traffic Accident Liability Insurance: First is the compulsory traffic accident liability insurance. This is a mandatory insurance that every motor vehicle must purchase. It provides compensation by the insurance company for losses and casualties caused by traffic accidents involving the insured vehicle. This must be purchased and cannot be arbitrarily canceled. Once canceled, it is illegal. 2. Vehicle Damage Insurance: Vehicle damage insurance refers to compensation provided by the insurer according to the contract when the insured vehicle suffers damage due to natural disasters or accidents within the scope of insurance liability. However, natural disasters here include earthquakes. 3. Third-Party Liability Insurance: This insurance is referred to as 'third-party insurance' for short. It means that if the car owner or an authorized qualified driver causes a traffic accident during the use of the vehicle, resulting in injury to a third party or damage to property, the insurance company will provide compensation. The limit of this insurance is chosen by the car owner, i.e., the insured. 4. Passenger Liability Insurance: This insurance is also known as 'seat insurance' or 'passenger insurance', responsible for compensating injuries to specified seat occupants caused by the vehicle. The car owner can set compensation limits for each seat as needed. This insurance is equivalent to accidental injury insurance.
2
4
Share

How often should the air filter in a sedan be replaced?

According to the car's maintenance manual, it should be replaced every 10,000 to 20,000 kilometers or once a year. It is recommended to clean the air filter every 5,000 kilometers to reduce the formation of throttle sludge. The location of the car's air filter element varies depending on the intake form and the engine's structure. It is generally located in the air filter on the engine's intake pipe. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal mesh. The function of the air filter: to filter out particulate impurities in the air, ensuring that sufficient clean air enters the cylinder and preventing floating dust from being sucked into the engine, which could accelerate the wear of the piston group and cylinder. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or style. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. The engine sucks in a large amount of air during operation. If the air is not filtered, the suspended dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring that sufficient and clean air enters the cylinder. A dirty air filter: Using a dirty air filter while driving can cause insufficient engine intake, incomplete fuel combustion, leading to unstable engine operation, reduced power, and increased fuel consumption. Therefore, the car's air filter must be kept clean. The car's air filter is a device that removes particulate impurities from the air, consisting of one or more clean air filter components. Its main function is to filter out harmful impurities in the air before it enters the cylinder to reduce early wear of the cylinder, piston, piston rings, valves, and valve seats. Therefore, air must pass through the air filter's fine filtration before entering the cylinder. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have little dust and minor blockage, it can be cleaned with high-pressure air from the inside out and continue to be used. Excessively dirty air filters should be replaced promptly.
16
2
Share

Where to Find the Last Four Digits of the VIN?

The last four digits of the VIN can be found below the left or right windshield of the motor vehicle, or by opening the vehicle's registration certificate and checking there. The VIN, also known as the Vehicle Identification Number, is a unique 17-digit code composed of Arabic numerals and uppercase English letters. This number is used to identify the manufacturer, engine, chassis number, and other relevant details of the vehicle. There are two main formats for VINs: the first is the ISO 3779 standard adopted by the European Union, and the second is primarily used in North America.
9
1
Share

What Are the Uses of Recycled Engine Oil?

It can be reprocessed into recycled lubricating oil, turning waste into treasure and enabling circular utilization. Below are the hazards caused by unlicensed vendors collecting engine oil: Safety Hazards: Small vendors use simple production techniques and methods, resulting in substandard products that disrupt normal market order, cause significant damage to vehicles, and lack safety guarantees. Environmental Hazards: Small vendors use rudimentary transportation tools and workspaces. Spilled or dumped waste oil can cause severe ecological damage. For example, 0.5 kilograms of waste oil can pollute 1,000 tons of clean water, which is roughly equivalent to the annual drinking water consumption of seven people.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.