···
Log in / Register

Why does the car air conditioner stop cooling just a few days after recharging the refrigerant?

3 Answers
RicardoFitz
07/29/25 2:21pm
Reasons why the car air conditioner stops cooling just a few days after recharging the refrigerant: 1. Insufficient power supply voltage, preventing the compressor from operating normally: It is recommended to install a voltage regulator. 2. The cooling capacity of the air conditioner is too small: Consider these factors when purchasing an air conditioner. If the configuration is unreasonable, the air conditioner must be replaced. 3. The external ambient temperature is too high: This issue cannot be resolved. 4. The air conditioner has not been cleaned or maintained for a long time: It is recommended to perform cleaning and maintenance. 5. The copper pipe connecting the indoor and outdoor units is too long: Adjust the installation method. Below is an introduction to air conditioner maintenance: 1. Comprehensive inspection of the air conditioner: When using the air conditioner for the first time in summer, inspect the air conditioning system first, such as checking the refrigerant and whether the air filter is too dirty through the liquid storage tank, and whether there are foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioner: The air filter should be replaced regularly; otherwise, the air conditioner will produce a musty smell. In addition, the condenser should also be cleaned regularly, and the water tank should be removed for thorough cleaning.
Was this review help?
7
3
Share
Julie
08/13/25 6:36am
I've encountered the issue of the air conditioning not cooling right after recharging the refrigerant several times, mostly due to leaks in the system. The refrigerant slowly leaks out, possibly due to aging seals or loose pipe connections. After recharging, a pressure test should be conducted to locate the leaks, otherwise, it's just a waste of money. Additionally, dust accumulation in the evaporator or a clogged condenser can also lead to poor cooling, affecting the compressor's efficiency. Driving without cold air on hot days is really uncomfortable, so it's recommended to clean the evaporator box during regular maintenance. If you're doing it yourself, buy a simple pressure gauge to test and fix any issues promptly.
Was this review help?
13
0
Share
Expand All
PatrickRose
10/10/25 8:37am
I usually love tinkering with cars. If the AC isn't cooling right after adding refrigerant, it's likely a compressor failure or pipe blockage. When refrigerant pressure is insufficient, the compressor automatically shuts off to prevent damage. Or it could be poor electrical contact or a blown fuse. Last time I checked, the fan wasn't spinning, causing poor heat dissipation and AC failure. Don't neglect maintenance - clearing debris can extend lifespan. Watching YouTube tutorials to DIY repairs can be fun, but for complex issues it's best to consult professional mechanics. Ensuring system sealing integrity is a critical step.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Where to Collect the Inspection Exemption Label for Vehicles?

Vehicle inspection exemption labels can be obtained at the local vehicle management office or through the Traffic Management 12123 App without any fees. Below is some information about the inspection exemption label for vehicles: 1. Vehicle Management Office: If applying at the vehicle management office, the vehicle owner needs to bring the vehicle's driving license (original and copy), the ID card of the vehicle owner, the compulsory traffic insurance policy of the vehicle, and other relevant documents. Before processing, all traffic violation fines must be settled. 2. 12123 App: On the homepage of the Traffic Management App, find the 'Apply for Inspection Exemption Label' option, click on it, and then select the vehicle status option. Click 'Query,' and a prompt box for handling the annual inspection service will appear. Read the prompt information carefully, confirm, and click 'Continue Processing.' Fill in the vehicle information as required, review the prompt information, confirm, and click 'Next' to complete the application for the inspection exemption label.
17
3
Share

How to install the alternator belt on a Mercedes-Benz GLA?

Installation method for the alternator belt on a Mercedes-Benz GLA: 1. Loosen the generator fixing screw and the belt tension adjustment screw; 2. Push the generator towards the engine to minimize the distance between the pulleys, then place the belt on and align it properly; 3. Adjust the belt tension to the appropriate level, and tighten the engine fixing screw and adjustment screw. The Mercedes-Benz GLA is a compact SUV introduced by Beijing Benz, with dimensions of 4427mm in length, 1834mm in width, and 1610mm in height, and a wheelbase of 2729mm. It is equipped with a 1.3T turbocharged engine, delivering a maximum power of 100kw, and matched with a 7-speed dual-clutch or 8-speed dual-clutch transmission.
11
0
Share

Can a C1 License Drive Yellow License Plate Vehicles?

C1 license cannot drive yellow license plate vehicles, it only permits driving blue license plate vehicles. Yellow license plate vehicles typically refer to heavy-duty or large vehicles, which require a B-class license or above to operate. The C1 license is designated for small and micro passenger vehicles, as well as light, micro, and small special-purpose vehicles. The full name of a driver's license is the motor vehicle driving license, which is a legal document issued by the administrative authorities after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations and driving skills, and passed the relevant tests. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
14
0
Share

How much engine oil should be added to a Mondeo?

Mondeo requires 4.5 liters of engine oil. If it's a major overhaul without activation, approximately 5 liters are needed. The specific steps for adding engine oil are as follows: 1. Open the driver's side door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Open the hood; 4. Unscrew the engine oil cap and add the engine oil; 5. The oil level should be between the upper and lower marks on the dipstick. The Mondeo is a mid-size car introduced by Changan Ford, with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. It is equipped with either a 1.5T or 2.0T turbocharged engine, with maximum power outputs of 134kw and 152kw respectively, paired with a 6-speed automatic transmission.
14
2
Share

How to Obtain the Vehicle Environmental Protection Label?

Vehicle environmental protection labels can be obtained at the vehicle management office. Owners need to bring their vehicle license, motor vehicle registration certificate, and their own ID card. The steps are as follows: 1. Submit the required documents at the issuance window of the vehicle management office; 2. The vehicle management office will review the documents; 3. Upon successful review, the vehicle management office will issue and print the classification label; 4. The applicant fills out the registration form; 5. The applicant receives the label and retrieves their valid documents. The vehicle environmental protection label is a classification label for motor vehicle emission standards issued by the state, categorized into yellow and green labels. It is issued after reviewing the vehicle type and emission standards, aiming to facilitate energy-saving and emission-reduction inspections and regular environmental protection checks for vehicles.
15
2
Share

What to do if a car window can only go down but not up?

Solutions for a car window that can only go down but not up include: 1. Initialize the window, which is usually caused by a malfunction in the window control system; 2. Remove dirt from the window lift channel by inserting a chopstick wrapped in a wet towel into the guide channel and moving it up and down to clean; 3. Apply lubricant or replace the window seal. Most cases where the car window cannot move up or down are due to mechanical jamming, and applying some lubricant after cleaning the guide rails should resolve the issue. Car window regulators can be structurally categorized into arm-type regulators and flexible-type regulators. Arm-type regulators include single-arm regulators and double-arm regulators, while flexible-type regulators include cable-type regulators, belt-type regulators, and flexible-shaft-type regulators.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.