Why does the car air conditioner cool slowly after being exposed to the sun?

1 Answers
DelAubrey
07/24/25 3:40pm
The reason why the car air conditioner cools slowly after being exposed to the sun is that the compressor protection device trips. Here is more relevant information: 1. Reasons and solutions for high pressure and overheating: (1) Too much refrigerant. Appropriately reduce the amount of refrigerant. (2) Poor heat dissipation. Check if the condenser tube is dirty and clean the condenser. (3) Blockage in the pipeline system. Refer to the pressure gauge to judge and eliminate, then reprocess the system. (4) Dust and scale accumulation on the evaporator or filter. The airflow becomes smaller, and the system pressure and temperature become unbalanced. Clean the evaporator or filter. (5) Lack of fluorine is also possible. When there is a lack of fluorine, the compressor exhaust temperature will overheat, causing the overload protection switch to trip. 2. Problems with the circuit: (1) Control circuit board failure. (2) Temperature sensor overload, incorrect information. (3) Loose or poor contact of power wiring. (4) The starting capacitor or compressor starting coil is burnt out.
Was this review help?
5
0
Share
More Forum Discussions

Where is Changan Automobile produced?

The headquarters of Changan Automobile Company is located at No. 260, Jianxin East Road, Jiangbei District, Chongqing City. Here is an introduction about Changan Automobile: 1. Fields: Changan Group's industries involve three main areas: complete vehicle engines, military products, and components. 2. Models: Changan Automobile has launched product series including micro vans, sedans, MPVs, SUVs, trucks, and large and medium-sized buses. It has successively introduced China's first car with completely independent intellectual property rights—the Changan CM8, concept cars Jiexun, Yangtze Sturgeon, and Longteng, the MPV 'Landwind Fashion', and CV11. Additionally, there are upcoming economical and mid-level sedans such as CV6, CV7, and CV8.
3
0
Share

What are the differences between Verna and Accent?

Verna and Accent differ in appearance, body dimensions, configurations, and powertrain performance. The specific differences between Verna and Accent are as follows: 1. Exterior and Interior. Verna features harmonious body lines. Accent has smooth body lines. 2. Body Dimensions. Verna: Length 4380mm, Width 1728mm, Height 1460mm, Wheelbase 2600mm. Accent: Length 4300mm, Width 1705mm, Height 1460mm, Wheelbase 2570mm. 3. Configurations. Verna is equipped with a 3.5-inch LCD instrument panel and engine electronic anti-theft function, which Accent lacks. However, Accent has rear power windows, electrically adjustable exterior rearview mirrors, and a co-driver vanity mirror, which Verna does not have. 4. Powertrain Performance. Verna: Equipped with a 1.4L four-cylinder naturally aspirated engine, paired with a 6-speed manual transmission. Maximum horsepower 100Ps, maximum power 73.3KW, maximum torque 132N·m, maximum torque speed 4000rpm, top speed 185km/h. Accent: Equipped with a 1.4L four-cylinder naturally aspirated engine, paired with a 5-speed manual transmission. Maximum horsepower 95Ps, maximum power 70KW, maximum torque 132N·m, maximum torque speed 4000rpm, top speed 170km/h.
4
4
Share

Which is better, the Tayron or the Tharu?

Tayron and Tharu each have their own advantages in different aspects. Body dimensions: The latest top-end version of the Tayron has body dimensions of 4589(mm) x 1860(mm) x 1660(mm), with a wheelbase of 2731(mm). The latest top-end version of the Tharu has body dimensions of 4453(mm) x 1841(mm) x 1632(mm), with a wheelbase of 2680(mm). Overall, the top-end version of the Tayron is longer than the Tharu, and its wheelbase is also slightly longer. Configuration: Comparing some safety features, driving assistance configurations, lighting configurations, and interior configurations between the top-end versions of the Tayron and Tharu, the Tharu's top-end version is more comprehensively equipped than the Tayron's. Power: The Tayron is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 220Ps, maximum power of 162kW, and maximum torque of 350N·m, paired with a 7-speed dual-clutch transmission. The Tharu is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 186Ps, maximum power of 137kW, and maximum torque of 320N·m, paired with a 7-speed dual-clutch transmission. In terms of power output, the top-end version of the Tayron is more powerful than the Tharu.
15
4
Share

What is the best engine oil for BMW 5 Series?

BMW 5 Series uses fully synthetic engine oil with a viscosity grade of 5W30. Synthetic oil has a wider operating temperature range and longer service life, achieving the required performance with lower viscosity. Taking the 2012 BMW 523Li Leading model as an example, it is a mid-to-large-sized sedan with dimensions of 5039mm in length, 1860mm in width, and 1471mm in height, with a wheelbase of 3108mm. The 2012 BMW 523Li Leading model features double-wishbone independent front suspension and multi-link independent rear suspension. It is equipped with a 2.5L engine (model N52B25) paired with an 8-speed automatic transmission.
15
3
Share

What Oil Should Be Used for Buick Maintenance?

Buick's original equipment manufacturer (OEM) oils include brands such as Mobil, Shell, and Castrol. For example, the OEM oil for the Buick Excelle is Mobil brand, specifically Mobil 1 5W30 full synthetic oil; while the Buick Envision uses Mobil 1 Silver and Castrol Edge, both of which are full synthetic oils. The recommended OEM full synthetic oil is 5W-30, with a replacement capacity of 5L and a replacement interval of 5,000 kilometers. Buick vehicles do not strictly require the use of dexos-certified oil, and other brands of oil can also be used. However, the oil must meet the certification standards, as certified oils provide a certain level of quality assurance.
13
0
Share

The other party is fully at fault for the car accident. Should I go to a 4S store for repairs?

If your car is hit and the other party is fully at fault, it's better to go to a 4S store for repairs, as they are professional and can guarantee quality. Introduction: A 4S store, fully known as Automobile-Sales-Servicshop4S. Overview: It is a sales store that integrates automobile sales, maintenance, parts, and information services. It entered China from Europe after 1998. Development: 4S stores are invested and constructed by dealers according to the standards set by automobile manufacturers. The stores have unified designs both inside and outside, with huge investments often exceeding tens of millions. They are luxurious, imposing, and comfortable, and can only sell single-brand cars specially authorized by the manufacturers.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.