Why does the car air conditioner cool but not drain water?

1 Answers
DiGia
07/29/25 10:37pm
The reason why the car air conditioner cools but does not drain water is due to a lack of Freon. The functions of the car air conditioner are: 1. To achieve the cooling effect by continuously cycling the refrigerant through phase changes; 2. To remove dust, odors, smoke, and toxic gases from the air inside the car, making the interior air fresher, and to humidify the air inside the car. The maintenance methods for car air conditioners are: 1. Do not set the temperature too low; 2. Control the direction of the air outlet; 3. Do not use it for extended periods; 4. Appropriately turn on high airflow; 5. Turn off the air conditioner when driving at low speeds. The precautions for using the air conditioner are: 1. Do not set the temperature too low; 2. Control the direction of the air outlet; 3. Avoid prolonged use; 4. Appropriately turn on high airflow; 5. Turn off the air conditioner when driving at low speeds.
Was this review help?
13
1
Share
More Forum Discussions

How to Buy New Car Insurance?

After purchasing a vehicle, you first need to prepare relevant documents and information, then contact an insurance company to determine the required services in advance. After determining the services in advance, proceed to the insurance company to complete the procedures. By signing the corresponding vehicle insurance contract with the insurance company, you can ensure the safety of your vehicle. After signing the vehicle insurance contract, you can pay the insurance premium with the company personnel and keep the corresponding receipts and invoices. The contract will then take effect. In the future, it is necessary to properly protect the contract to avoid contract disputes.
3
2
Share

How to Remove a Motorcycle Exhaust Pipe?

Prepare an adjustable wrench and a hook spanner, and wear gloves. Choose an open area, lay the motorcycle on its side on the ground (you can place a mat underneath) for easier removal. For a one-piece muffler, remove the fixing bolts on the muffler; for a split-type muffler, use the hook spanner to loosen the threaded sleeve and pull out the muffler. Remove the pressing bolts on the engine body and pull out the exhaust pipe. For an integrated exhaust pipe and muffler connected by a threaded sleeve, use the hook spanner to loosen the threaded sleeve and pull out the pipe head.
12
4
Share

How to Reset the Tire Pressure Monitoring Light on Volkswagen Lamando?

When using the tire pressure monitoring system, first ensure the tires are properly inflated, then press the SET button. A beep sound indicates successful reset. If the tire pressure warning light remains on, stop the vehicle to check for possible leaks or underinflation. You may choose to visit an auto repair shop for inspection. Check if any foreign objects have punctured the tires. If none are found, press and hold the tire pressure monitoring button to reset the system. Visit a 4S dealership for professional diagnostics, where computer equipment can check for punctures or underinflation.
11
2
Share

What to Do When the Car Screen Goes Black but There's Still Sound?

Tap the touchscreen to see if there is any response. If the touch function works normally, then focus on the display screen itself and check if any components are damaged. If there is no touch response, inspect the touch circuit to ensure there are no issues with the wiring. Typically, this could be due to the decoding chip or core module not functioning or being damaged. Try upgrading the graphics card. If you have already updated to the latest DirectX and PHY software, it might also be due to system and game incompatibility. During driving, body vibrations may cause loose connections. Try readjusting the wiring connections. If the issue is with the navigation display, try disconnecting the power. If the problem persists, consider replacing it.
8
1
Share

Is Car Window Tint Easy to Remove?

Use a utility knife to make an incision on the tint film, then peel it off. For stubborn areas or small sections, carefully scrape them off with a scraper. When removing the tint by hand, apply appropriate force to avoid breaking the film. Excessive force can make the peeling process more difficult. After removing the tint film, many adhesive residues will remain on the glass. Use an adhesive remover, a squeegee, and a cloth to clean them off bit by bit. If not done properly, DIY tint removal can leave scratches that may obstruct your driving vision. It is recommended to have it removed at a professional tint shop.
1
4
Share

How to Turn Off the Radio in a Geely Emgrand?

Geely Emgrand is equipped with a one-touch start function button. To start the vehicle, simply press the brake pedal and press the one-touch start button. In the entertainment unit of the Geely Emgrand's central control screen, click on the radio icon to enter the radio interface. Locate the PWR button on the left side of the central control area and the MODE button on the right side of the steering wheel, which is used to switch between music playback and radio. Press and hold the PWR button on the left side of the central control screen to turn off the radio and music playback.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.