Why Does the Camry Experience Jerking During Sudden Acceleration?

2 Answers
HoldenRose
07/24/25 10:35pm
Excessive carbon buildup in the throttle body, fuel injectors, and intake manifold. Substandard fuel quality leading to incomplete combustion. Faulty spark plugs, ignition coils, etc., causing cylinder misfires. Below is an introduction to the Camry: 1. Features: The Camry is popular because it is slightly longer than its rival, the Mondeo. It appears very spacious, coupled with a roomy interior, making it increasingly favored. This car feels like it was specifically designed for urban driving, with excellent steering, smooth turning, and quick response. 2. Design: The new Camry Classic Edition has undergone minor exterior adjustments, the most noticeable being the adoption of a new chrome grille design. The headlight assembly also features a new design, while other aspects remain consistent with the previous model. Inside, the car has adjusted decorative colors and now uses chocolate-red wood grain trim panels.
Was this review help?
20
4
Share
Claire
08/10/25 3:05pm
I've been driving a Camry for several years, and the jerking during sudden acceleration is indeed a headache. It feels like the car suddenly hesitates or shakes the moment I step on the gas. I've encountered this issue, which might be due to problems in the fuel system, such as clogged fuel lines or excessive carbon buildup in the injectors affecting fuel supply uniformity. Long periods without cleaning or using low-quality gasoline can make this more likely. Alternatively, it could be an ignition system fault—aging spark plugs or leaking ignition coils causing incomplete combustion of the air-fuel mixture, resulting in intermittent acceleration. The automatic transmission might also have low fluid levels or wear, leading to noticeable jerking during gear shifts under hard acceleration. Faulty electronic sensors, like a malfunctioning oxygen sensor, can misread throttle signals. In any case, don't ignore it. Try using fuel additives to clean carbon deposits or replacing the fuel filter first. If the problem persists, visit a professional shop for a comprehensive check to avoid safety risks.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What brand is the original battery for the Magotan B8?

The original battery model for the Magotan is 6-QW-70. The Magotan uses a Fengfan 12v70AH battery, with the model number 6-QW-70. The standard charging current is 'one-tenth of the ampere-hour, 13 hours,' meaning for a battery capacity of 20AH, the charging current is 2A for a duration of 13 hours. Below is more related information: Introduction to the battery: 1. The battery is an essential part of a car and can be divided into traditional lead-acid batteries and maintenance-free batteries. 2. If a battery is left unused for a long time, it will slowly self-discharge until it becomes unusable. Therefore, the car should be started periodically to charge the battery. Another method is to disconnect the two electrodes from the battery. It's important to note that when removing the positive and negative electrode wires from the terminal posts, the negative wire should be disconnected first, or the connection between the negative terminal and the car chassis should be removed. 3. The designed lifespan of a battery is 27 months. For general family use, the battery is more economical, with many new car batteries lasting 3-4 years. However, after the first replacement, it is usually necessary to replace the battery every 2 years or so. Taxis, which are used more intensively, may see single-shift vehicles lasting just over a year, while double-shift vehicles may need replacement every 8-10 months.
17
2
Share

Is BYD's Battery Lithium Iron Phosphate or Lithium Battery?

BYD models use both lithium iron phosphate batteries and lithium batteries, with the choice depending on different vehicle categories. Below is relevant information about BYD: 1. Brand History: BYD Company Limited was founded in 1995, starting with a team of over 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. Originally a battery manufacturer, BYD initially played the role of an 'outsider' in the automotive industry. However, leveraging its 'independent intellectual property rights' and the acquisition of Qinchuan Auto, BYD gained a first-mover advantage over other newcomers. 2. Brand Introduction: BYD Auto adheres to a development path of independent research, production, and branding, committed to creating truly affordable and high-quality vehicles for the public. The product designs incorporate advanced international trends while aligning with Chinese cultural aesthetics.
16
4
Share

What are a Vehicle License and a Driver's License?

Vehicle License is the legal document that permits a car to be driven on the road. Driver's License is the legal document that permits you to drive a car on the road. The former is the document for the vehicle, while the latter is for the person. Only with both documents can driving on the road be safe. Below are the differences between a Vehicle License and a Driver's License: 1. The Vehicle License is the valid document that certifies the corresponding vehicle, containing information such as: "License Plate Number", "Vehicle Type", "Usage Nature", "Owner", "Address", "Brand Model", "Engine Number", "Vehicle Identification Number (VIN)", "Registration Date", "Issuance Date", etc. 2. The Driver's License is the document that certifies the driver's eligibility to operate the corresponding vehicle type, containing the following information: Driver's Information: Name, Gender, Date of Birth, Nationality, Address, ID Number (Driver's License Number), Photo.
2
1
Share

How to Install Anti-Rain Film on Car Rearview Mirrors?

Method for installing anti-rain film on car rearview mirrors: First, clean the rearview mirror thoroughly and wet it with water. Then, peel off the adhesive side of the waterproof film and align it to the center of the rearview mirror. Finally, remove any internal air bubbles and peel off the surface layer. Incorrect installation of the anti-rain film, such as improper alignment or trapped air bubbles, can cause distorted vision and affect rearview effectiveness. Below are specific advantages and disadvantages of car window films: 1. Enhanced Privacy: Most car films are one-way, protecting the owner's privacy, but it's important to choose the right type. 2. Anti-Shatter Feature: In case of an accident, the film helps hold shattered glass together, preventing flying shards and protecting passengers. 3. Thermal Insulation: High-quality car window films provide thermal insulation, effectively controlling temperature rise in summer and retaining heat in winter, ensuring a comfortable driving environment. 4. Reduced Light Transmission: Car window films typically have a light transmission rate below 90%, especially when applied to the windshield, which can reduce visibility and impact driving safety.
5
3
Share

How many kilowatt-hours of electricity are needed to fully charge a small electric vehicle?

Generally, charging a 48V-20AH battery from a fully discharged state requires approximately 1.08 kilowatt-hours of electricity. Below is some relevant knowledge about electric vehicle charging: 1. Charging knowledge: The amount of electricity charged into an electric vehicle battery is usually 1.05 times the battery's discharge capacity. The electricity consumption can be calculated based on the charging voltage, using the formula: Electricity consumption = Charging voltage * Battery rated capacity * 1.05. The calculation process is as follows: Required charging amount = 20 * 1.05 = 21AH. Electricity consumption = 21 * 51.6 (average charging voltage) = 1083.6WH. Since 1 kilowatt-hour = 1000WH, fully charging the battery requires approximately 1.08 kilowatt-hours. The charging time is between 8 to 10 hours, meaning the electricity consumption per hour of charging is between 0.1 to 0.14 kilowatt-hours. 2. Electric vehicles do not require frequent charging: Frequent charging can easily lead the battery into a failure period. However, it is still necessary to charge regularly based on usage, but there is no need to charge every time after riding.
2
4
Share

Where is the Mercedes-Benz light sensor located?

Mercedes-Benz light sensor is located on the engine hood. The following are the symptoms of a damaged car sensor: 1. Unstable idle: The engine idle is unstable, and there is a momentary pause or stalling phenomenon when the vehicle starts or decelerates to stop. 2. Acceleration performance: The engine acceleration performance decreases, the speed display on the instrument panel deviates, and the engine fault light comes on. 3. Maintenance: If the speed sensor is damaged, it is necessary to go to the repair shop for inspection and repair in time. The following are the main differences between imported Mercedes-Benz and domestic Mercedes-Benz: 1. Workmanship: For domestic vehicles, starting with the doors, the treatment of corners and sheet metal is very rough. Then to the driver's seat part, the throttle and brake pedals and under the steering wheel, many plastic edges and material installations have burrs. The trunk and storage space have no protection at all. Domestic Mercedes-Benz has the phenomenon of cutting corners, which is rare in imported ones. 2. Precision: For domestic Mercedes-Benz, the chassis and some plastic assembly parts, many places where screws should be tightened do not have screws. 3. Configuration: Domestic configurations are more expensive than imported ones.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.