Why does the BYD Song make a noise when shifting gears and releasing the clutch?

How to open the fuel tank cap of the Maxus G10?

The method to open the fuel tank cap of the Maxus G10: Press the fuel tank cap when the car is unlocked, and it will pop out. If the fuel tank cap does not pop out, it may be locked by the fuel tank cap lock on the vehicle's central console. Simply unlock it. If the latch of the fuel tank cap lacks lubrication, the fuel tank cap may also be difficult to open. In this case, it should be lubricated immediately to avoid delaying refueling. The Maxus G10 is an MPV model under SAIC Motor. The vehicle has a length, width, and height of 5168 mm, 1980 mm, and 1928 mm respectively, with a wheelbase of 3198 mm. The interior of the Maxus G10 adopts a full-view design, extending from the central console through the driving area to the front doors, forming a circular theater-style wrap-around cabin design, which is spacious and dynamic. The multi-layered central console design, cool instrument panel design, and dynamic theater-style halo design create a great in-car atmosphere. The exquisite materials and matching in the cockpit highlight a luxurious driving and riding experience.

8

0

Share

Does exceeding 30cm in parking distance during Subject 3 result in failure?

Exceeding 30cm in the roadside parking distance during Subject 3 does not result in failure. For a perfect score, the test vehicle must be parked within 30cm from the sideline. If the distance exceeds 30cm but is less than 50cm, 10 points will be deducted. If it exceeds 50cm, the test result will be deemed unqualified. Passing standards for each driving test subject: 1. Subject 1: Written test, 100 questions, full score of 100, passing score is 90 or above (including 90). 2. Subject 2: Only pass or fail. Full score of 100, passing score is 80 or above (including 80). For large buses, medium buses, and heavy trucks, the passing score is 90 or above (including 90). 3. Subject 3: Full score of 100, passing score is 90 or above (including 90). 4. Subject 4: Written test, 50 questions, full score of 100, passing score is 90 or above (including 90).

6

0

Share

Can You Drive with a Broken Car Water Pump?

You should not continue driving if the car water pump is broken. It is recommended to tow the vehicle for repair as soon as possible. A broken car water pump can be categorized into the following two scenarios: 1. Damaged bearing or seal ring: This can cause the timing belt to get soaked and damaged, leading to a series of engine malfunctions, or even cylinder explosion. 2. Water leakage: Rapid loss of coolant will cause the engine temperature to rise, damaging various components. In severe cases, it may also lead to cylinder explosion or even engine destruction. Additional Information: 1. Centrifugal water pumps are widely used in car engines. Their basic structure consists of the pump housing, connecting plate or pulley, pump shaft and bearings or integrated bearings, pump impeller, and sealing device, among other components. They are a major part of the vehicle. 2. Inside the engine block, there are multiple water channels for coolant circulation, connected to the radiator at the front of the car via hoses, forming a large water circulation system. At the engine's upper water outlet, a water pump is installed, driven by the fan belt, to pump out hot water from the engine block's water channels and pump in cold water.

10

3

Share

What documents are needed for the first vehicle inspection of a new car at the DMV?

For the first inspection of a new car, the following documents are required: the vehicle's certificate of conformity, invoice, proof of compulsory insurance, proof of purchase tax payment, ID card (for non-locals, bring a temporary residence permit and ID card), and a photo of the vehicle. Below is some relevant information about vehicle inspection: 1. Regulations: New cars do not require on-site inspection within the first 6 years; you can directly obtain the inspection compliance mark. However, after 6 years (including 6 years), an annual inspection is required, and the vehicle must be driven to the inspection site. 2. Notes: For non-commercial passenger cars and other small and micro passenger vehicles (excluding vans and vehicles with 7 or more seats) registered within 6 years, during the biennial regular inspection, the vehicle owner can directly apply for the inspection mark from the traffic management department of the public security authority by providing proof of compulsory traffic accident liability insurance and proof of vehicle and vessel tax payment or exemption, without the need for a safety technical inspection at an inspection agency. Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle.

16

5

Share

What should be noted when changing brake fluid?

When changing brake fluid, the following aspects should be noted: 1. Do not mix impurities into the brake fluid. During the use of brake fluid, gasoline, diesel, engine oil, or windshield washer fluid should not be mixed into the brake fluid, as this will significantly affect braking performance. 2. Do not mix brake fluids of different brands. Different types and brands of brake fluid should not be mixed. For braking systems with special requirements, a specific brand of brake fluid should be used. Since the formulations of brake fluids from different brands and types vary, mixing them can degrade the performance of the brake fluid. Even for brands that are highly compatible and labeled as mixable or substitutable, long-term mixing should be avoided. 3. Before replacement, use protective covers to prevent car components from being corroded by the brake fluid. 4. Ensure that all air is completely purged during the brake fluid change. If air enters the brake system's master cylinder or hydraulic lines, it will reduce the vehicle's braking performance and seriously compromise driving safety. The transfer hose should ideally be transparent and clean to monitor the discharge of old fluid and check for air bubbles.

7

1

Share

What is the displacement of the Jaguar XF?

The Jaguar XF comes with two displacement options: 2.0T and 3.0. Below are detailed introductions about the Jaguar XF: 1. The exterior design of the new Jaguar XFL is as sharp as the previous model, featuring a large honeycomb grille and narrow headlights that exude elegance and nobility. The air intakes on both sides enhance its fierce appearance, reminiscent of a jaguar. 2. The interior is simple yet luxurious, with most touchable areas covered in soft materials. The addition of a Meridian sound system further enhances the experience. The functional zones on the center console are clearly divided, and the embedded central screen is just the right size. The three-spoke multifunction steering wheel offers a sporty feel and a delicate touch. 3. In terms of power, the new Jaguar XFL offers a choice between a 2.0T turbocharged engine and a 3.0T supercharged engine, delivering maximum horsepower of 250 and 340 respectively. It is paired with an 8-speed automatic transmission, with a combined fuel consumption ranging between 8.6-9.4 liters per 100 kilometers.

19

0

Share

Why does the BYD Song make a noise when shifting gears and releasing the clutch?

How to open the fuel tank cap of the Maxus G10?

Does exceeding 30cm in parking distance during Subject 3 result in failure?

Can You Drive with a Broken Car Water Pump?

What documents are needed for the first vehicle inspection of a new car at the DMV?

What should be noted when changing brake fluid?

What is the displacement of the Jaguar XF?

How far can a Corolla Hybrid go after the fuel warning light comes on?

How to conduct the online review for a B2 driver's license with 3 points deducted?

What to Do When the Trailer Brakes Feel Soft and Fail to Stop?

What are the color options for the Suzuki Swift?