Why does the BYD dashboard's boost light turn red?

1 Answers
KyleRose
07/30/25 12:30am
boost means acceleration in English, and as a verb, it means to lift upward. In automobiles, it represents turbocharger pressure, with 100 indicating the maximum pressure value, beyond which exhaust is required. Relevant information about BYD is as follows: 1. Introduction: BYD is a Chinese automobile brand founded in 1995, mainly producing commercial and family cars as well as batteries. 2. Brand History: BYD Company Limited was established in 1995, starting with a team of more than 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. 3. Development Philosophy: BYD has always adhered to the development philosophy of 'Technology is king, innovation is the foundation.' With its R&D strength and innovative development model, it has achieved comprehensive development and plays a significant role in various fields such as batteries, electronics, passenger cars, commercial vehicles, and rail transit.
Was this review help?
4
4
Share
More Forum Discussions

What Causes Abnormal Noises While Driving a Car?

Abnormal noises while driving a car can stem from tire noises, engine noises, or body noises. These abnormal sounds are irregular phenomena and indicate existing or potential car malfunctions. Any abnormal noise suggests an abnormal operation or damage in a certain component, so immediate inspection is necessary upon detection. Causes of abnormal noises: Tire noises: A dull "thudding" sound usually indicates tire tread deformation, bulging, severe wear, or insufficient tire pressure; a "tapping" sound may suggest small stones stuck in the tread; if metallic clashing sounds come from inside the tire while driving, it could be due to damaged shock absorbers or bearings, requiring prompt repair at a service center. Engine noises: These are more serious issues, indicating problems with engine components or the moving mechanism. Repairs are complex and costly. Professional technicians should diagnose and address engine noises. Body noises: These may result from insufficient body rigidity, causing deformation during driving, leading to friction or shaking between doors and frames, or loose welds causing metal friction. Some cars have significant wind noise, partly due to their design. Poorly fixed body components can also cause noises, often resolved by tightening screws.
9
3
Share

What Causes the Malfunction Light to Stay On in an EFI Motorcycle?

When the malfunction light stays on in an EFI motorcycle, it indicates an issue with the electronic control system, often related to the electrical circuit. You can ride the motorcycle to a repair shop to have it checked. The fault code should be retrieved, and based on this code, the cause can be identified. If there is a fault, it should be repaired accordingly; if not, the light can simply be turned off. Common warning lights in EFI motorcycles and their meanings: Low Coolant Level Warning Light: Indicates that the coolant level is too low and needs to be refilled. TCS Control System Warning Light: Indicates a fault in the traction control system. Transmission Overheat Warning Light: Indicates that the transmission temperature is too high and needs cooling. Drivetrain Warning Light: Indicates a fault in the drivetrain. Types of EFI Motorcycles: Closed-Loop System: The functionality and operation of closed-loop EFI motorcycles are essentially the same as those in cars. Closed-loop EFI motorcycles can adjust the fuel injection amount based on the oxygen content in the exhaust and can also change the intake pressure according to external atmospheric pressure changes. Most domestically produced EFI motorcycles on the market are open-loop systems. Open-Loop System: Open-loop EFI motorcycles have largely been phased out due to their inability to meet high environmental standards.
6
0
Share

Does the Wuling Zhiguang have air conditioning?

As a 7-seater micro van, the Wuling Zhiguang comes equipped with air conditioning, making it highly suitable for urban, rural, and countryside markets. Additionally, it can meet the daily needs of small businesses in urban areas and is also capable of serving certain commercial markets. The specific steps to operate the Wuling Zhiguang's air conditioning are as follows: Open the driver's side door of the Wuling Zhiguang. Depress the brake pedal to prepare for engine start-up. Press the one-touch start button. All dashboard lights will illuminate, indicating the engine has started. Press the A/C button located on the center console to activate the automatic air conditioning system. Adjust the fan speed to enjoy cool air. The Wuling Zhiguang features a stylish T-shaped design with technological elements, presenting a novel, elegant, simple, and aesthetically pleasing appearance. The dashboard offers a wider and more spacious view. The center console includes silver-plated trim and storage compartments, and the audio system has been upgraded from a cassette player to a USB-equipped unit with a data cable, enhancing material harmony. The air conditioning vents are more rationally positioned. For example, adjustments to the angle between the legs and the ground and the foot's control over the pedals ensure a comfortable throttle angle, reducing foot fatigue and preventing ankle soreness during long drives.
17
3
Share

What does 'ramp' mean?

Ramp, also known as an approach, refers to the section of road that connects the upper and lower roads of an overpass or elevated road, as well as the section that connects the highway with adjacent auxiliary roads. Below are definitions of various types of ramps: 1. Entrance and exit ramps: These are auxiliary connecting sections for entering and exiting the main road, also known as approaches. In engineering terms, they typically refer to a short section that provides vehicles with access to the main road and adjacent auxiliary roads, or other main roads via bridges/slopes/connecting roads, as well as collector-distributor roads. They are a major component of road interchange construction. 2. Up and down ramps: These are auxiliary connecting slopes for entering and exiting elevated roads, moving upwards or downwards, usually referred to as 'interchange ramps.' Note: The above two types (items 1 and 2) often incorporate the design of collector-distributor roads. 3. Direct ramp: Places the left-turn lane on the left side. 4. Indirect ramp: Places the left-turn lane on the right side, using a loop to connect with other highways. 5. Semi-direct ramp: Similar to an indirect ramp but does not use a loop; instead, it uses a longer, more undulating elevated road as the connecting ramp.
17
4
Share

What is a Power Liftgate with Automatic Operation?

Power Liftgate with Automatic Operation allows for hands-free closing of the trunk lid, requiring the optional automatic control feature for the liftgate. The contactless liftgate opening system consists of an upper sensor and a lower sensor. The upper sensor is flat-shaped and detects the lower leg movement, while the lower circular sensor identifies toe movements. Both sensors are connected to an electronic analysis unit that continuously measures capacitance. By comparing the temporal patterns of measured capacitance changes, specific movement sequences can be recognized, enabling the system to identify intentional foot gestures (approaching and retreating from the bumper). The control unit for the power liftgate system manages and monitors the liftgate operation. With a button press, it automatically opens or closes the trunk lid. This automatic operation can only be activated when the vehicle is stationary, not during driving mode. The power liftgate control unit performs these functions: analyzing CAN messages and functional requests; converting CAN signals to standardized positions; controlling the liftgate actuator drive; regulating and monitoring the actuator's motor speed, position, and current consumption. The trunk lid can be automatically opened or closed by pressing any of the liftgate buttons. After authorization through the Keyless Entry and Start System, the junction box electronics release the trunk lock mechanism, followed by liftgate latch control.
18
1
Share

How many times are turn signals used throughout Subject 2?

There are a total of 6 instances where turn signals are required in Subject 2, which are: When starting the vehicle, turn on the left turn signal; When starting on the slope during slope fixed-point start, turn on the left turn signal; During parallel parking, turn on the right turn signal when the vehicle passes the side parking spot and prepares to park 30 cm away from the edge before reversing; Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking spot during parallel parking, shift into drive gear and turn on the left turn signal, then turn it off promptly after exiting; When entering the right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Turning the steering wheel within 3 seconds of activating the turn signal before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. The full score for Subject 2 is 100 points, with assessment criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, slope fixed-point parking and start (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves) as the five mandatory items (some regions include a sixth item: highway card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pole testing, slope fixed-point parking and start, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, limited-width gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain road turns, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.