···
Log in / Register

Why does the Buick Excelle stall while driving?

3 Answers
KimberlyFitz
07/29/25 11:31pm
Here are the reasons why the Buick Excelle may suddenly stall while driving: 1. Electrical circuit failure: Stalling due to low-voltage power interruption during driving, mainly check the ignition and starter switches as well as the fuse box. 2. Low-voltage circuit short circuit causing stalling: In this case, the stalling occurs intermittently; inspect the low-voltage circuits. 3. Component failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The car may start initially, then stall after a while, restart, and stall again. 4. Fuel system failure: Damage to the fuel pump, fuel line rupture, clogged fuel inlet, or empty fuel tank. However, the car can usually be restarted in these situations. 5. Ignition system: Problems with the engine overheating protection system can also cause stalling.
Was this review help?
18
0
Share
Jaden
08/16/25 2:20am
I was driving a Buick Excelle when it suddenly stalled, which was truly terrifying. After stopping, I checked and found a fuel pump failure causing unstable oil pressure that led to the engine shutting down abruptly. Later, I learned that common issues with this car also include aging ignition coils or carbon buildup on spark plugs, which can affect the proper functioning of the ignition system. Another possibility is a clogged air filter, restricting airflow and making the car prone to stalling during acceleration. If it's an electrical issue, such as voltage fluctuations from the alternator or an aging battery, the entire system may lose power. I recommend pulling over immediately with hazard lights on and avoiding forced restarts. Safety first—regular oil changes and fuel system cleaning are essential to prevent such failures.
Was this review help?
8
2
Share
Expand All
DiMiranda
10/19/25 2:29am
I've found that the Buick Excelle stalling while driving is mostly due to fuel system issues. When the fuel pump or fuel lines are clogged, insufficient oil pressure can cause the engine to suddenly stop. It could also be a problem with the ignition module, where burnt coils or high-voltage wires lead to spark failure. Electrical faults shouldn't be overlooked either - unstable battery connections or insufficient alternator output can cause instant power loss. During inspections, I've also seen cases where excessive carbon buildup affects engine operation. When encountering this problem, first pull over safely to check simple components and prevent worsening the situation. Routine maintenance is crucial - replace filters when needed and don't cut corners to save money.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

How many liters of transmission oil does the Octavia need for a change?

The amount of transmission oil required for an Octavia depends on the type of transmission: 1. Manual transmission requires 2 liters of transmission oil; 2. Automatic transmission requires 4 to 5 liters of transmission oil. Transmission oil is a lubricant that keeps the gear system clean, ensuring the transmission operates properly and extending the lifespan of the transmission components. The Octavia is a compact car with body dimensions of 4659 mm in length, 1814 mm in width, and 1460 mm in height, with a wheelbase of 2686 mm. It is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85 kW and a maximum torque of 200 Nm, paired with a 7-speed dual-clutch transmission.
5
3
Share

Does the Baojun 310w have an automatic transmission?

Baojun 310w has an automatic transmission. An automatic transmission vehicle means that the driver does not need to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. Taking the 2020 Baojun 310w as an example, it is a compact car with body dimensions of: length 4620mm, width 1710mm, height 1535mm, and a wheelbase of 2750mm. The 2020 Baojun 310w features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 105ps, a maximum power of 77kw, and a maximum torque of 135nm, paired with a 5-speed mechanical automatic transmission.
12
2
Share

How to Remove Reflective Stickers from a Car?

Methods to remove reflective stickers from a car: 1. Before removing the reflective stickers, clean the vehicle thoroughly and wipe it dry, which helps in identifying residual adhesive around the stickers; 2. After cleaning and drying, use a hairdryer to heat the stickers. You can use a heat gun specifically designed for anti-explosion films, heat a corner, then use a plastic scraper to lift the sticker and gently pull it; 3. Direct the hot air at the junction between the sticker and the car body, pulling it slowly while heating until it comes off. The optimal positions for reflective stickers on a car are on both sides of the front and rear bumpers and the wheel arches. It is crucial not to obstruct the license plate. Note that too many reflective stickers on a small car can be overly bright, affecting nighttime driving safety.
11
0
Share

Is it mandatory to service the car at a 4S shop during the warranty period?

It is not mandatory to service the car at a 4S shop during the warranty period, as car owners have the right to choose their preferred maintenance service provider. Servicing the car outside a 4S shop during the warranty period does not affect the car's three-guarantee services. However, it is important to keep all maintenance receipts when servicing elsewhere. Maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car upkeep. The benefits of maintenance include: 1. Ensuring the vehicle is in optimal performance condition; 2. Improving the vehicle's efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance tidy and preventing damage.
6
3
Share

Is Baojun a Joint Venture or Domestic Car?

Baojun is a domestic car brand, independently created by SAIC-GM-Wuling, with its product lineup covering sedans, MPVs, SUVs, and new energy vehicles. Taking the Baojun 560 as an example, it is the first SUV under the Baojun brand. In terms of body dimensions, the Baojun 560 measures 4620mm in length, 1820mm in width, and 1750mm in height, with a wheelbase of 2750mm. Exterior-wise, the front of the Baojun 560 continues the brand's family-style design, featuring a chrome grille, headlight contours, and hood character lines similar to those of the Baojun 730. The LED daytime running lights are positioned below the fog lights, and the headlights are equipped with LED width indicators.
3
4
Share

How to Open the Front Hood of a Wuling Hongguang Vehicle?

The method to open the front hood of a Wuling Hongguang vehicle is as follows: 1. Enter the driver's seat, locate the front hood release lever, and pull it upwards until you hear a 'click' sound; 2. Move to the front of the vehicle to check if the hood has been released. When there is a gap between the hood and the vehicle body, it indicates that the hood is released. Insert your hand into the middle section of the front hood, find the secondary latch, and pull it upwards. Then, lift the front hood of the vehicle; 3. Support the engine hood with the prop rod. The Wuling Hongguang is a microvan under SAIC-GM-Wuling, with body dimensions of length 4390mm, width 1660mm, height 1750mm, a wheelbase of 2720mm, and a fuel tank capacity of 50 liters.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.