Why does the Boyue suddenly lose power and fail to start?

1 Answers
DelSophia
07/30/25 5:55am
The reason why the Boyue suddenly loses power and fails to start is due to a dead or faulty battery. Below is an introduction to related content about Geely Automobile: 1. Geely Automobile: Geely Automobile is a domestic brand, not a joint venture. Geely is a Chinese automotive brand. 2. Vehicle Models: Includes SUVs, sedans, and other models. There are six automotive brands under Geely: Geely, Lynk & Co, Volvo, London Taxi, Proton, and Lotus. Below is extended information on the differences between domestic and joint venture vehicles: 1. Price Aspect: Due to core technologies being held by foreign companies, joint venture vehicles often have higher prices. 2. Investment Method: Domestic vehicles are designed and manufactured by Chinese themselves; joint venture vehicles are produced through Chinese investment in land, factory usage rights, and capital, while foreign investors contribute brand, technology, etc. 3. Brand Aspect: Domestic vehicles are independent brands; joint venture vehicles are produced through Sino-foreign cooperation.
Was this review help?
18
0
Share
More Forum Discussions

Will Typhoon Affect the Subject 2 Driving Test?

Typhoon will affect the Subject 2 driving test. Wipe the rearview mirrors: After rain, the rearview mirrors will be wet, affecting driving visibility. The mirrors may also fog up. What you should do is prepare tissues or cloths and wipe them clean immediately when you get into the test vehicle. Prevent shoes from slipping: The road is slippery on rainy days, and your shoes may unknowingly get muddy. Therefore, candidates should clean the soles of their shoes before getting into the car to avoid slipping during the test. Learn to use the windshield wipers: If the rain does not affect visibility, it is recommended not to turn on the wipers to prevent errors in the test process due to their use. If the rain is heavy and the front view is obstructed, the wipers should be turned on. During preliminary practice, it is also recommended not to neglect the use of the wipers.
7
5
Share

Should a small chunk missing from the tire sidewall be replaced?

If the tire sidewall is scratched, the tire should be replaced as soon as possible to avoid the risk of a high-speed blowout. Here is some relevant information about car tires: 1. The role of tires: To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; to transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and passability; to work with the car suspension to cushion the impact during driving; 2. Tire lifespan: The lifespan of a tire is related to many factors, such as climate, road conditions, driving style, installation, maintenance, etc. According to international regulations, if the tire is used normally, it must be replaced when the tread depth wears down to 1.6 millimeters.
12
1
Share

Which Part is the Fender?

Automobile fenders, also known as wing panels, are located on the outer body of the wheels and can be described as a covering component. Below is relevant information about fenders: 1. Fenders not only reduce the aerodynamic drag coefficient during driving based on aerodynamics, greatly enhancing the vehicle's stability, but also prevent gravel and mud kicked up by the wheels from splashing onto the underside of the cabin, thereby protecting the car's chassis. 2. If a fender develops cracks, it is likely due to being too thin, making it unable to withstand the torsional deformation of the front beam head. In such cases, a "mesh weaving" method using steel bars can be employed to reinforce the fender through preparatory welding. This ensures the original deformation capacity while also improving the overall toughness of the fender. However, steel plates should never be used for preparatory welding, as this can easily affect the fender's torsional deformation capacity.
3
3
Share

What are the reflective marking requirements for the rear of hazardous material vehicles?

The reflective marking requirements for the rear of hazardous material vehicles are: reflective body markings, hazardous material symbols and text, and an orange stripe must be affixed. Pre-departure vehicle inspection: Before setting off each day, conduct a comprehensive inspection of the vehicle, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Use seat belts properly. In the event of a severe collision, seat belts provide protection no less effective than airbags. Avoid fatigued driving and take breaks every 2 hours. Comply with traffic rules: Especially on highways, do not speed. Speeding not only risks traffic police penalties but, more importantly, compromises safety.
5
3
Share

Is It Illegal to Load Items in the Trunk?

Loading items in the trunk of a private car does not violate traffic laws. Passenger vehicles are not allowed to carry cargo except on external roof racks and built-in luggage compartments. For sedan roof rack loading: The height must not exceed 0.5 meters from the roof or 4 meters from the ground. For heavy-duty, medium-duty trucks, and semi-trailers: The height must not exceed 4 meters from the ground, and for container-carrying vehicles, it must not exceed 4.2 meters. For other cargo-carrying motor vehicles: The height must not exceed 2.5 meters from the ground. For motorcycle loading: The height must not exceed 1.5 meters from the ground, and the length must not extend beyond the vehicle body by 0.2 meters. For two-wheeled motorcycles, the width must not exceed 0.15 meters on either side of the handlebars. For three-wheeled motorcycles, the width must not exceed the vehicle body.
14
0
Share

Do You Need to Press the Clutch and Brake When Starting a Manual Transmission Car?

Starting a manual transmission car requires pressing the clutch and brake. First, confirm the position of the handbrake and check if the gear lever is in the neutral position. Press the clutch pedal all the way down with your left foot, then start the engine. Each starting attempt should not exceed 5 seconds, and once the engine stabilizes at idle speed, you can begin driving. Below are the benefits of pressing the brake when starting: 1. Pressing the brake enhances the vehicle's braking capability. Some parking areas have steep slopes, requiring the use of the handbrake plus leaving the car in gear. If the handbrake is not effective enough, pressing the brake during starting can prevent the car from rolling. 2. It also avoids accidents caused by forgetting to press the clutch when starting the car in gear, which could lead to sudden movement. Pressing the brake when starting in gear can instantly suppress the engine and prevent accidents.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.