Why does the Borgward BX7 tire pressure monitoring not display numerical values?

How to Check if ETC is Successfully Activated?

To check if ETC is successfully activated, you can insert the ETC card into the ETC electronic tag. Here are the precautions for using ETC: 1. Installation Requirements: The ETC device should be installed at a height not lower than 1.2 meters and not higher than 2.5 meters. The installation angle N should be between 30 and 90 degrees (the angle between the surface of the electronic tag and the horizontal plane). 2. Passage Requirements: The ETC transaction sensing area is 8 meters, and the recognition speed in the ETC lane should be below 20 km/h. To prevent automatic sensing from paying for the vehicle in front, maintain a distance of more than 10 meters from the vehicle ahead. Excessive speed may also lead to failed deductions. If the ETC card is underfunded, it may be included in the ETC blacklist, which will be lifted 24 hours after recharge.

12

1

Share

Where to Book Subject One?

You can book the driver's license test Subject One by yourself or through a driving school. Subject One, also known as the theoretical test or driver's theory test, is part of the assessment for obtaining a motor vehicle driver's license. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer, consisting of 100 questions, with a passing score of 90 or above. Specific details about the Subject One test are as follows: 1. Test Content: The Subject One test includes regulations on road traffic, traffic signals, traffic safety violations and accident handling, application and use of motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules. 2. Test Standards: The total test time is 45 minutes, with 100 questions in the form of true/false and multiple-choice questions, each worth 1 point, and a passing score of 90. 3. Test Opportunities: There are two chances to take the test. If both attempts fail, the test is terminated.

19

5

Share

What is the service life of BMW run-flat tires?

BMW run-flat tires have a service life of 3-5 years. More information about BMW run-flat tires is as follows: 1. Sidewall puncture: Sidewall puncture basically means the tire is immediately scrapped. The reason run-flat tires can continue driving after a blowout is that they rely on the sidewall for support. 2. Tire puncture diameter: If the diameter of the puncture exceeds 4.2 mm, the tire needs to be replaced. 3. Tire inflation: Continuing to drive improperly with underinflated tires may cause rolling damage. 4. Bead damage: Damaged or deformed beads, tread deformation, or rubber corroded by chemicals cannot be repaired.

14

2

Share

How to Charge a Car Battery with a Charger?

Method for charging a car battery: Connect the positive terminal of the battery to the positive terminal of the power source, and the negative terminal of the battery to the negative terminal of the power source. Below is a related introduction on how to charge a car battery: 1. First, use the initial charging current until bubbles are released from the electrolyte, and the single-cell voltage rises to 2.3—2.4V. Then reduce the current to half of the initial charging current and continue charging until the electrolyte releases intense bubbles, and the voltage remains stable for 3 hours. 2. The total charging time is approximately 45—65 hours. The temperature should be controlled between 35—40°C. If the specific gravity of the electrolyte does not meet the required standard after the initial charging, adjust it using distilled water or an electrolyte with a specific gravity of 1.4. After adjustment, charge for another 2 hours until the specific gravity meets the standard. 3. New batteries often do not reach their full capacity after the first charge, so a discharge cycle should be performed. Discharge at a 20-hour rate (i.e., discharge with a current equal to 1/20 of the rated capacity until the single-cell voltage drops to 1.75V), then recharge until fully charged. If the capacity is still below 90% of the rated capacity after one charge-discharge cycle, perform another charge-discharge cycle.

5

3

Share

Is Plastic Renovator Harmful to Car Paint?

Plastic renovator is harmful to car paint. Although car renovators do not have substantial drawbacks, care must be taken during application to avoid contact with the painted areas. In theory, automotive plastic renovators possess a certain level of corrosiveness, specifically formulated for plastic components. The downside is that they may cause issues such as paint fading, yellowing, and cracking. The relevant details about plastic renovators are as follows: Introduction 1: The main component of plastic renovators is a reducing agent. Plastic products tend to turn yellow and age over time, affecting their appearance. Plastic renovators can restore the original color of yellowed plastic surfaces. Introduction 2: This product also has a significant cleaning effect on general dirt on plastic surfaces. It is non-toxic, harmless, and pollution-free, making it particularly suitable for renovating and cleaning items such as washing machines, refrigerators, water dispensers, computers, copiers, telephones, plastic doors and windows, and plastic pipes.

8

3

Share

How Many Points Are Deducted for Launch Control Start?

Performing a launch control start at a traffic light is considered a traffic violation and will result in a fine and a deduction of 3 points. As a racing technique, launch control is recommended to be attempted on closed roads or race tracks. Using launch control on public roads where traffic is operational is considered a dangerous behavior. The following are related introductions to launch control: Introduction 1: Launch control is an acceleration technique that uses the transmission to adjust the engine speed to the output platform of maximum torque, allowing the engine to deliver maximum torque from the moment of takeoff, achieving the best acceleration. Introduction 2: In various famous acceleration competitions, almost all racing cars use methods such as increasing turbo pressure, using semi-slick tires, and filling with racing fuel. Additionally, one essential acceleration technique is launch control. Introduction 3: Another technique derived from this is the burn-out start, where excessive throttle is applied to make the rear wheels spin, producing a large amount of smoke.

1

0

Share

Why does the Borgward BX7 tire pressure monitoring not display numerical values?

How to Check if ETC is Successfully Activated?

Where to Book Subject One?

What is the service life of BMW run-flat tires?

How to Charge a Car Battery with a Charger?

Is Plastic Renovator Harmful to Car Paint?

How Many Points Are Deducted for Launch Control Start?

What to Do When Normal-Mode Prevents the Car from Starting?

Can a temporary ID be used for the subject one test?

Where is the manufacturer's plate of BAIC Huansu located?

How Long Does It Take to Learn Driving Test Subject 3?