···
Log in / Register

Why does the black car paint appear dull and not shiny?

6 Answers
EdwardAnn
07/28/2025, 02:25 AM

Black car paint appears dull and not shiny because waxing was not performed after polishing, leading to this condition. Benefits of waxing: The advantage of waxing a car is that it provides waterproofing. During daily use, cars are often exposed to the air and subjected to wind, sun, and rain over time, which can damage the body. Additionally, wax offers resistance to high temperatures, effectively maintaining the smoothness of the car's paint surface and protecting against UV radiation, thereby extending the lifespan of the paint. Precautions for car waxing: Depending on the driving environment and parking locations, the interval between waxing should vary. Before waxing, it is essential to thoroughly clean any dirt and dust from the car's exterior.

Was this review help?
20
5
Share
SkylarDella
08/11/2025, 10:29 AM

I drove a black sedan for almost ten years, and the dull, lackluster paint was a constant headache. The main reason was prolonged exposure to UV rays and air pollution, which caused the paint to oxidize and lose its shine over time—especially noticeable on black cars, as they tend to show aging more prominently. Parking outdoors daily led to the accumulation of dust, bird droppings, and tree sap, and improper washing with harsh detergents further scratched the paint. I made it a habit to wash the car weekly with a pH-neutral car shampoo, avoiding stiff brushes, and applied protective wax monthly to slow oxidation. Whenever possible, I parked in underground garages or shaded areas to minimize direct sunlight. If the paint had already turned dull, I first performed polishing to remove the oxidized layer, then reapplied wax or considered a professional ceramic coating—this restored the car's shine and proved far more cost-effective than frequent touch-ups in the long run.

Was this review help?
16
3
Share
Expand All
IslaLee
09/27/2025, 04:14 AM

I found that the root causes of dull car paint are numerous, with paint oxidation being the primary factor. Black cars absorb more UV rays, leading to molecular structure changes. The accumulation of stains such as industrial dust and oil forms a protective film that blocks light reflection. Car washing habits are crucial—I prefer using soft sponges and specialized car wash detergents, as hard tools or household laundry detergent can worsen scratches. Wearing off of wax is another reason, as thin or outdated wax layers fail to provide protection. It's recommended to wax the car quarterly, with types like synthetic wax or ceramic coatings offering better durability. Mild dullness can be addressed with a polishing cloth, while severe cases may require inspection for deep damage or corrosion issues. Remember, simple maintenance can significantly extend the lifespan of your car's paint, and adding a UV-protective film enhances the effect even more.

Was this review help?
14
3
Share
Expand All
LeLydia
11/10/2025, 10:25 PM

Dull and lackluster car paint is usually caused by oxidation or dirt on the surface. Oxides cover the gloss, which is more noticeable on black cars. My approach is to wash the car frequently with a neutral cleaning solution, avoiding abrasive materials that could damage the surface. Regular waxing with a product containing UV inhibitors can prevent this. Park away from polluted areas like near factories. For minor issues, DIY polishing with simple tools can restore brightness; for severe cases, seek professional paint repair. Keeping the car clean is key.

Was this review help?
10
5
Share
Expand All
VonMaximus
01/01/2026, 12:10 AM

The dull paint makes my beloved car look unattractive. After paying attention to the details, I realized it's caused by oxidation, stains, and scratches. Black absorbs light and easily shows dirt. Contact with corrosive substances like bird droppings and acid rain accelerates the dulling. I recommend starting with cleaning to remove stains, using a mild cleaner to avoid scratching the paint. Waxing or applying protective layers like ceramic coatings provides good UV protection. Park away from under trees or direct sunlight, and regularly wipe off daily dirt. Going to a professional detailing shop for maintenance can keep the shine lasting longer. Good daily habits can save on major repair costs.

Was this review help?
3
0
Share
Expand All
OAngela
01/01/2026, 12:12 AM

Long-term use of a black car leads to dull paint mainly due to natural wear and tear: UV rays, rain exposure, and pollutants eroding the paint layer, causing oxidation and a matte finish. Improper maintenance, such as washing with hard cloths, adds micro-scratches, reducing reflective shine and resale value. Mild dullness can be restored with polishing compound, while severe cases require professional repair like ceramic coating for lasting protection. Use pH-neutral car wash solutions and regular maintenance to prolong lifespan. Minimize exposure to pollutants; investing time in proper care is wiser than neglecting issues.

Was this review help?
8
0
Share
Expand All
More Forum Discussions

How to turn off the rear window wiper of Audi Q3?

Audi Q3 wiper switch: pulling inward activates the front wiper, pushing outward activates the rear wiper. When in the rear wiper position, push upward to turn off the rear wiper. Below is an introduction to the wiper: 1. The wiper, also known as the windshield wiper, is a device used to remove rain and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. Due to legal requirements, almost all vehicles are equipped with wipers. Rear windows of hatchbacks and SUVs also have wipers. Besides cars, other means of transportation such as trains and trams are also equipped with wipers. Some engineering machinery, such as cranes, also have wipers. 2. The wiper assembly includes a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. When the driver presses the wiper switch, the motor starts. The motor's speed, through the torque-increasing effect of the worm gear, drives the swing arm. The swing arm drives the four-bar linkage, which in turn drives the shaft installed on the front panel to swing left and right. Finally, the shaft drives the wiper blade to sweep the windshield.
9
1
Share

Which country's brand is Baojun?

Baojun is a domestic brand. It is an independent automobile brand created by SAIC-GM-Wuling in 2010. The new passenger car brand "Baojun Auto" officially released by SAIC-GM-Wuling marks the formal entry of this Chinese microcar leader into the booming sedan market. The origin of the Baojun brand, "Jun" originally means a fine horse, and Baojun is people's most beloved fine horse. The following is a related introduction to Baojun Auto: 1. Baojun is produced in two major manufacturing bases in Liuzhou and Qingdao, with products covering sedans, MPVs, SUVs, new energy vehicles and other fields. 2. The Baojun brand is a passenger car brand suitable for global emerging markets, which SAIC-GM-Wuling has focused on creating by integrating more than 20 years of automobile manufacturing experience, the essence of eight years of joint venture operation, and fully leveraging the advantages of the three shareholders of SAIC, GM, and Wuling.
8
5
Share

Can I Add Antifreeze by Myself?

You can add car antifreeze by yourself. Yes, as long as the colors match, you can add it directly. Method for adding antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a special focus on the five-way water pipe. The five-way pipe gets its name from the five interfaces that connect various parts. Antifreeze flows through the five-way pipe and is then distributed to different parts of the car to function. If there is any leakage of antifreeze in this section, replace the water pipe or re-secure the interface as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir and continue filling it until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may have a faint pink tint. Continue adding clean water until the outflowing water is clear. Remember to remove the heater water pipe and drain the water from the heater. Antifreeze composition: The main components of antifreeze are: 50% pure water, 40% methanol, and 10% other substances.
2
5
Share

What to Do When the Car Shows Insufficient Tire Pressure?

Insufficient tire pressure indicates that there is a leak in the car tire that needs to be repaired promptly. Visually inspect whether the tire can still continue to drive. If it can, drive to the nearest tire repair shop for treatment; if the tire pressure is already too low to drive, it is recommended to use an onboard air pump to inflate the tire, then go to the nearest repair shop for servicing; or replace it with the spare tire and then go for repair. The following is an introduction to car tire pressure: 1. Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. In car maintenance, the engine is the heart of the car, and the damage to the engine will lead to the end of the car's life. Then, the tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car. 2. Tire pressure monitoring is the real-time automatic monitoring of tire pressure during the car's operation, and it alerts the driver in case of tire leaks or low pressure to ensure driving safety. Tire pressure monitoring is divided into indirect and direct types. Determining the type of tire pressure monitoring in your car helps to promptly address the issue when the tire pressure monitoring light comes on.
4
4
Share

What engine does the Hongqi H9 have?

The engine of the Hongqi H9 is independently developed by China FAW and is a domestically produced engine. The engine model of the Hongqi H9 is CA4GC20TD-31. The 2.0T version engine has a maximum power of 185kW and a maximum torque of 380Nm, while the 3.0T version engine has a maximum power of 208kW and a maximum torque of 400Nm. For daily maintenance of the Hongqi H9 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
19
2
Share

What is the length of the GL8?

The GL8's body dimensions are 5256mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. As a large MPV, the Buick GL8's size offers significant advantages. Below is an introduction to the GL8: 1. The all-new Buick GL8 features design elements such as a three-dimensional straight waterfall grille, multi-dimensional blue Bi-Xenon HID headlights, a 360-degree wraparound interior design, and ice-blue ambient lighting, all of which inherit the design language of the new generation Buick family. 2. It is equipped with front and rear parking sensors, cruise control, hill start assist, a power sunroof, rearview camera, daytime running lights, front and rear airbags, and other comprehensive configurations, offering excellent value for money. 3. In terms of power, it is equipped with a 2.0T turbocharged engine, with a maximum power of 191.0kW, maximum horsepower of 260PS, and maximum torque of 350.0N·m, paired with a 6-speed automatic transmission.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.