Why does the Audi A4 prompt to turn off the engine and check the coolant?

1 Answers
StAyla
07/30/25 10:17am
Audi A4 prompts to turn off the engine and check the coolant for the following reasons: (1) The coolant level is below the minimum mark; (2) Insufficient pressure due to coolant delivery pipe leakage; (3) Risk of radiator bursting or engine cylinder block/head freezing. Here are some precautions regarding coolant usage: 1. Vehicle dimensions: Length 4762mm, width 1847mm, height 1436mm, wheelbase 2825mm, fuel tank capacity 54l, curb weight 1665kg. 2. Specifications: The 2021 Audi A4 is equipped with a 2.0T turbocharged engine producing maximum power of 204PS (150kW) and maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission. 3. Do not directly add undiluted coolant concentrate: To prevent coolant deterioration or excessive viscosity at low temperatures.
Was this review help?
18
0
Share
More Forum Discussions

How soon should I register the color change after modification?

After applying a wrap at a legitimate modification shop, the shop will provide the vehicle owner with a receipt or invoice. Within 10 days from the date the invoice is issued, the owner can go to the vehicle management office to register the modification. According to Article 56 of the "Regulations on the Registration of Motor Vehicles," if the vehicle color is changed without completing the required modification registration, the traffic management department of the public security authority may issue a warning or impose a fine. The vehicle may also be impounded and required to be restored to its original color. To apply for a change in the vehicle body color, the following documents must be submitted in accordance with the "Road Traffic Safety Law": "Application Form for Modification Registration of Motor Vehicles," identity proofs of the vehicle owner and their agent, the motor vehicle registration certificate, and the motor vehicle driving license. According to Article 6 of Chapter 2 of the "Road Traffic Safety Law," if the color change covers no more than 30% of the vehicle's surface area, no modification registration is required. However, if it exceeds 30%, the change must be registered with the authorities within 10 days after the color modification. Important considerations for vehicle color changes: Before changing the vehicle color, the owner should consult the local vehicle management office where the vehicle is registered to confirm whether the region permits color changes via wraps. If the region does not allow this method, the modification cannot be registered, and the wrap must be removed to restore the original color. Additionally, according to the "Regulations on the Registration of Motor Vehicles," owners are no longer required to apply for pre-approval from the vehicle management office before making modifications such as changing the vehicle color, installing body kits, or replacing the engine. Instead, they can apply for modification registration after completing the changes. Article 10 specifies that registered motor vehicles must apply for modification registration in the following cases: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of usage type (e.g., commercial to non-commercial or vice versa). Change of the vehicle owner's residence in or out of the jurisdiction of the vehicle management office. Furthermore, Article 15 of the "Road Traffic Safety Law of the People's Republic of China" states: Police cars, fire trucks, ambulances, and engineering rescue vehicles must display designated markings and install alarms and signal lights as required. Other motor vehicles are prohibited from using similar markings, alarms, or signal lights reserved for these special vehicles.
17
0
Share

How to Install a Rearview Mirror?

Just peel off the isolation paper on both sides and stick it on, but be sure to scrape off any residual adhesive on the rearview mirror before installation, otherwise it won't stick firmly. This adhesive is divided into two parts, A and B, which need to be mixed before use. However, some AB adhesives take a long time to cure, so you may need to wait patiently for them to fully cure. This invisible adhesive, also known as UV adhesive, can perfectly bond plastic and metal. The car windshield is definitely made of glass. This type of rearview mirror does not require adhesive on the back; it only needs a suction cup to adhere to the glass, making it very practical and convenient.
17
4
Share

How to Report a Vehicle Driving Against Traffic?

When you spot a vehicle driving against traffic, first take photos or videos as evidence to facilitate the reporting process. After gathering evidence, call the local traffic hotline to report the incident location, time, and the vehicle's license plate number, then let the police handle it. Find the reporting address on the traffic website, then upload the photos/videos of the vehicle driving against traffic along with its license plate number to the local traffic website. After clearly describing the incident in writing, fill in the relevant information and mail it to the Traffic Management Order Department.
15
2
Share

How to Claim Compensation for Abnormal Engine Noise in a New Car?

First, take the car to a 4S dealership for inspection to identify the main cause of the abnormal noise and the reason for its occurrence. After replacing the new part, restart the car to check. If there is no abnormal noise, deliver the car to the customer as scheduled. If the noise persists, continue troubleshooting and resolving the issue. If the problem is not identified or the abnormal noise cannot be resolved after replacing parts, communicate with the manufacturer to discuss a solution before engaging with the customer. Depending on the driving conditions, faults can be eliminated without disassembling components such as the transmission, engine, or body.
11
0
Share

How to Unlock Tesla Doors?

When parked, Tesla offers three methods to unlock the doors: touchscreen unlock, park unlock, and P-gear unlock. While parked, manually tap the lock icon on the touchscreen to unlock all doors. Navigate to 'Vehicle Controls - Locks' and enable 'Unlock on Park' to have the doors automatically unlock when parked, requiring no additional actions. If 'Unlock on Park' is not enabled, press the P-gear to enter park mode, then press the P-gear again to unlock all doors.
16
1
Share

How to Open a Car Fuel Tank Cap?

Usually, there are several ways to open the fuel tank cap: mechanical key opening, in-car switch operation, and direct pressing. You can directly use the key to open the fuel tank cap lock, or some cars have a press-type mechanism, or you can simply lift the cap, but you may need a key to open it from the inside. Generally, in economy cars, the switch is located on the floor to the left of the driver's seat, on the front door panel, or on the dashboard marked with a fuel pump symbol; just open it. With the vehicle unlocked, simply press the fuel tank cap with your hand to open it. Note that the fuel tank cap cannot be opened when the car is locked.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.