···
Log in / Register

Why does the Aoling CTS overheat when climbing slopes?

4 Answers
VanMary
07/24/25 5:17pm

Aoling CTS overheats when climbing slopes due to insufficient engine coolant. Hazards of insufficient engine coolant: When climbing slopes, the engine power increases, generating more heat. If there are issues with heat dissipation at this time, the engine is highly prone to boiling over, which can damage the engine. Adding coolant can prevent such situations. Introduction to coolant: Engine coolant, also known as engine antifreeze, primarily ensures the normal and efficient operation of the engine. The coolant circulates within the engine's fuel tank, providing antifreeze, anti-rust, and anti-corrosion effects.

Was this review help?
9
1
Share
MacSophie
08/10/25 8:04am

I've been driving trucks for over 20 years, and overheating issues with the Aoling CTS during uphill climbs are quite common, mostly due to cooling system problems. When climbing, the engine is under heavy load, so the temperature rises quickly. If there's insufficient coolant or a leak, and the heat dissipation can't keep up, overheating occurs immediately. If the radiator is clogged with a thick layer of dust, heat can't dissipate, especially noticeable in summer. If the water pump fails, coolant circulation stops, and a loose fan belt also affects cooling. Once, my truck was climbing a mountain when the temperature gauge suddenly spiked. I stopped and found the fan belt had cracked—replacing it on the spot saved the day. I recommend regularly checking coolant levels, changing it every 5,000 kilometers, and cleaning the radiator to avoid bigger engine damage and costly repairs. For safe driving, if overheating occurs, slow down, stop, and check—don't push it.

Was this review help?
10
0
Share
Expand All
MacOmar
09/26/25 2:09am

As a car enthusiast who has worked on many vehicles, the Ouling CTS may experience overheating during uphill climbs due to several common factors. When climbing, the engine is under heavier load, increasing stress on the cooling system. For example, insufficient or dirty coolant can hinder circulation; a clogged radiator with excessive dust buildup blocks heat dissipation; a loose or aged fan belt prevents the fan from spinning; or a thermostat stuck in the closed position fails to open the circulation channel. I’ve tried inspecting it myself, starting with the basics: popping the hood to check fluid levels, feeling the radiator exterior for cleanliness, and testing the fan belt’s elasticity. Preventive measures include cleaning cooling components during every maintenance session and using antifreeze to extend lifespan. If overheating occurs, pull over immediately to let the car cool down—don’t take risks. These small habits can prevent roadside breakdowns and keep your beloved car running longer.

Was this review help?
8
4
Share
Expand All
EmmaLee
11/09/25 4:12am

The temperature of the Aoling CTS soars when climbing hills, which is really worrying. The main reasons are problems with the cooling system, such as insufficient coolant, a blocked radiator, or a faulty water pump. When the engine is under heavy load, insufficient heat dissipation leads to rapid temperature rise, which is highly harmful. I recommend stopping immediately to check the fluid level, regularly maintaining and replacing the coolant, and cleaning the radiator surface. Once the temperature is high, do not continue driving; wait for it to cool down before sending it for repair to avoid engine damage.

Was this review help?
14
3
Share
Expand All
More Forum Discussions

What to Do If You Keep Mistaking the Accelerator for the Brake?

When not pressing the accelerator, keep your foot on the brake to develop good driving habits. Here are some tips to avoid mistaking the accelerator for the brake: Place your right foot on the brake when not pressing the accelerator: While driving, make it a habit to place your right foot on the brake when you're not pressing the accelerator. This helps prevent confusing the accelerator with the brake. If you rest your right foot on the floor when not accelerating, it may feel more relaxed, but in an emergency, you might struggle to locate or accurately press the brake, leading to mistakenly pressing the accelerator instead. Develop good driving habits: For novice drivers, the main reason for mistaking the accelerator for the brake is insufficient familiarity with the vehicle or the lack of established good driving habits. Staying calm in unexpected situations is also crucial for safe driving.
15
0
Share

Which Gear is the Driving Gear in an Automatic Transmission Car?

In an automatic transmission car, the driving gear is the D (Drive) gear. The following is an introduction to the gears in an automatic transmission car: P Gear: Parking gear. When the vehicle is completely stationary, press the unlock button at the front of the gear lever to shift into P gear. R Gear: Reverse gear. When the vehicle is completely stationary, press the brake pedal and the unlock button at the front of the gear lever to shift into R gear. After releasing the brake pedal, slowly press the accelerator to move the vehicle backward. N Gear: Neutral gear. You can directly shift from R or D gear into N gear. When shifting out of N gear, you need to press the brake pedal. D Gear: Drive gear. You can directly shift from N gear into D gear. This gear is generally used when the vehicle is moving forward, and the system will automatically shift gears based on engine load and speed. S Gear: The S gear in an automatic transmission stands for Sport gear, which is a mode that emphasizes power output. Due to its strong power, the S gear is usually used when overtaking or climbing a slope. After completing the action, it is switched back to the more economical D gear. In terms of fuel consumption, the S gear mode consumes more fuel than the normal mode because of the increased fuel injection at high RPMs.
5
1
Share

Why is the Pajero called the Mountain Cat?

Pajero is called the Mountain Cat for the following reasons: English Name: The English name of Pajero is derived from 'Pajero', which originally refers to the Pampas cat, primarily found in South America, also known as the South American grassland cat. It inhabits areas ranging from 100 to 5000 meters above sea level and is a relatively fierce animal. Because this cat lives in mountainous regions year-round and has strong adaptability, locals commonly refer to it as the 'Mountain Cat'. Brand Image: The Pajero has consistently achieved victories in off-road rallies, aligning well with the image of the Pampas cat, which thrives in adversity. Over time, the Pajero came to be known as the 'Mountain Cat'.
13
4
Share

Are Green License Plate Vehicles Subject to Traffic Restrictions?

Local traffic restriction policies determine whether green license plate vehicles are subject to traffic restrictions. Green license plates are exclusive to new energy vehicles, specially designed by the state for differentiated management to quickly distinguish between traditional fuel vehicles and new energy vehicles. Currently, the format of green new energy vehicle license plates is: regional abbreviation + area code letter + exclusive letter for pure electric/hybrid + numbers. Green license plates refer to new energy vehicles, embodying the characteristics of green environmental protection, and can effectively and conveniently identify new energy vehicles. License plates, also known as vehicle registration plates, are standardized hard number plates with a unified format and style as stipulated by national vehicle management regulations. They are issued by vehicle management authorities after reviewing, inspecting, and registering the vehicles applying for the plates, featuring a unique registration code and are mounted on the front and rear of the vehicle. The conditions, procedures, and requirements for applying for new energy vehicle license plates are the same as those for regular vehicle license plates. However, only three types of vehicles—pure electric vehicles, plug-in hybrid electric vehicles, and fuel cell vehicles—are eligible for green license plates.
13
5
Share

Where is the airbag plug under the seat?

The airbag plug under the seat is generally located in front of or below the gear shift lever. Places marked with AIR, BGA, etc., are where the airbag is configured. If you really can't find it, you can refer to the car's user manual, which will have detailed records. The airbag plug is mostly located under the airbag, which is basically where the word "airbag" is written inside the car. Most airbag plugs are yellow. The airbag has a separate computer board, and all airbags are basically connected to the airbag computer board. Driver's airbag: There are two bolts under the rear cover of the steering wheel. Remove the bolts, gently lift it, and take off the connector that connects the clock spring to the generator. Generally, the connector has a lock. Some can be removed by pressing it, while others can be removed by pulling out the small pin. Passenger airbag: There are two types: split type and integrated type. The split type has a separate airbag cover with a gap between it and the dashboard, marked with SRS or airbag or a combination of the two. The integrated type has the airbag cover and dashboard as one piece, also marked with those words. The split type is easier to disassemble than the integrated type. Side airbag: After removing the A-pillar trim, the side curtain airbag appears. In a typical side collision, the side curtain airbag will quickly close the actual gap between the occupants and the door and B-pillar. Its function is to protect the side parts of the occupants (mainly the head). The side airbag must deploy at an extremely fast speed in the small gap between the occupants and the door to act as a buffer.
12
4
Share

Why Can't I Connect to CarPlay?

Reasons for not being able to connect to CarPlay: Damaged phone data cable: Check if the phone data cable is damaged or broken, and whether there are any foreign objects attached to the metal contact terminals on the USB plug and phone plug, or if the surface is oxidized. Internal port damage: Inspect the internal USB female port of the car stereo's external USB HUB for any damage, and whether the contact metal pieces can maintain good contact with the USB male plug. Loose connection: Check if the connection between the car stereo and the external USB HUB is loose. To avoid poor internal contact due to prolonged oxidation, you can repeatedly unplug and replug the two connectors of the cable.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.