Why does the Aion LX 580 make noise when braking?

What lights should be turned on when driving at night under well-lit conditions without street lights?

When driving at night under well-lit conditions without street lights, you need to turn on the headlights (high beams). Use the vehicle's clearance lights, maintain a safe speed, observe the road conditions, and pass safely. When approaching an intersection, slow down and switch between high and low beams to alert other vehicles and pedestrians. Do not use high beams when meeting non-motorized vehicles on narrow bridges, narrow roads without central barriers, or roads without center lines. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals, alternately use high and low beams as a signal. When driving at night without street lights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, or dust, do not use high beams if a vehicle is traveling in the same direction at a close distance. When meeting oncoming traffic on roads without central barriers or center lines, do not use high beams within 150 meters of the approaching vehicle.

18

2

Share

What is the model number of the roller chain?

The model number of the roller chain is 06B roller chain. Roller chain: An external roller chain refers to a chain with rollers on one or both sides. These side rollers can be installed either alternately or side by side at given intervals to ensure high-speed and smooth operation of the chain. Transmission chain: Transmission chains are divided into Series A and Series B. Series A conforms to the size specifications of American chain standards, while Series B conforms to the size specifications of European chain standards. The difference between the two chains is minimal. In Series A, the rollers and pins have a certain proportional relationship, whereas in Series B, the main dimensions of the components do not have an obvious proportional relationship with the pitch. Except for the 12B specification, which is lower than the A series, the other specifications of Series B are equivalent to the corresponding Series A products. In reality, these differences are not significant, but it is important to note that when selecting a chain for safety, the applied torque must be at least three times the limit torque.

16

3

Share

What Causes the Jerking When Shifting to Reverse Gear in an Automatic Transmission While Stationary?

Automatic transmission jerking when shifting to reverse gear while stationary is caused by: 1. Failure of the transmission control system, resulting in significant shifting impact; 2. Inadequate transmission cooling, leading to excessively high temperatures; 3. Excessive impurities inside the transmission. Solutions include: 1. Using diagnostic tools to identify the fault; 2. Replacing the transmission fluid and filter. An automatic transmission generally refers to a vehicle's automatic gear-shifting mechanism, where the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load while driving, replacing the driver's subjective judgment of timing and gear-shifting operations. A typical automatic transmission vehicle has six gear positions, arranged from top to bottom as: P, R, N, D, S, L.

10

2

Share

What time does the first session of Sichuan Subject 1 start?

Sichuan Subject 1 first session starts at 9:00 AM. Exam schedule: There are two sessions for Subject 1 in the morning. The first session starts at 9:00 AM, and the second session is at 10:00 AM. In the afternoon, there are three sessions at 13:00, 14:00, and 15:00 respectively. The exam duration is limited to 45 minutes. Since information registration is required before entering the examination room, it is recommended to arrive half an hour in advance. Passing Subject 1: The validity period of the driving skills test permit is three years. Applicants should complete Subject 2 and Subject 3 exams within this validity period. If the exams are not completed within the validity period, the passed subjects will be invalidated. Only after passing Subject 1 and obtaining the driving skills test permit will the three-year validity period apply. If all exams are not passed within three years, all results will be invalidated.

1

4

Share

How many stores does Kangzhong Auto Parts have nationwide?

Kangzhong Auto Parts has over 407 directly operated stores nationwide. Auto Parts Market: As an industry with a market size of trillions, the auto parts market accounts for 30% of the automotive aftermarket, with an annual compound growth rate of 13.61%. Facing such a huge market, numerous startups have emerged in the auto parts industry. Among them, Kangzhong Auto Parts, as a leader in the industry, adheres to the service philosophy of "Fast, Accurate, and Comprehensive" and the corporate mission of "Vehicle Health, Human Safety," ensuring that all car owners use safe auto parts. Kangzhong Auto Parts: Kangzhong Auto Parts Chain was established in 2013 as a professional auto parts supply chain service provider. By the end of October 2017, it had over 407 directly operated stores nationwide, serving more than 140 cities across 27 provinces and over 50,000 repair enterprises. It operates 17 regional central warehouses and more than 400 stores, delivering over 10,000 orders daily to terminal repair shops. It is projected that within the next three years, the number of regional warehouses will expand to 30, the number of offline stores will reach 1,000, and daily orders will grow severalfold.

3

4

Share

What are the reasons for severe shaking when the car is in reverse gear?

The reasons for severe shaking when the car is in reverse gear are: 1. The vehicle has just started: the engine temperature is relatively low, and the clutch does not separate completely due to overly thick oil; 2. Blockage of car parts: excessive carbon deposits causing the fuel injector to clog; 3. Incorrect use of reverse gear: reverse gear is not equipped with helical teeth and synchronizers, and relies on the meshing of gears. If the car shakes when shifting into reverse, it is due to incomplete meshing of the gears. The full name of reverse gear is the reverse driving gear, marked as R on the gear console. After shifting into reverse, the vehicle's direction of travel will be opposite to that of the forward gear, enabling the car to move backward, which is a special type of driving gear.

17

0

Share

Why does the Aion LX 580 make noise when braking?

What lights should be turned on when driving at night under well-lit conditions without street lights?

What is the model number of the roller chain?

What Causes the Jerking When Shifting to Reverse Gear in an Automatic Transmission While Stationary?

What time does the first session of Sichuan Subject 1 start?

How many stores does Kangzhong Auto Parts have nationwide?

What are the reasons for severe shaking when the car is in reverse gear?

What Documents Are Needed to Open a Car Lock?

Can You Still Drive with Low Engine Pressure?

What lights should be turned on when driving at night under good lighting conditions without street lights?

Why is the motorcycle turn signal not flashing?