Why does replacing EBC brake pads cause squealing noise?

1 Answers
HarmonyDella
07/25/25 2:45pm
It may be due to severe wear of the brake pads. Here's how to determine the wear level of brake pads: Check by mileage: Under normal driving conditions, inspect the brake pads every 5,000 kilometers. Not only should you check the remaining thickness, but also the wear condition of the pads, whether both sides are worn evenly, and if they retract freely. Any abnormal conditions must be addressed immediately. Do not wait until the friction material is completely worn out before replacing the brake pads. Brake pad warning: Some vehicles are equipped with a brake pad warning function. Once the wear limit is reached, the dashboard will alert you to replace them. In fact, when replacing, it's best to use the original equipment manufacturer (OEM) brake pads to ensure optimal braking performance and minimal wear between the brake pads and discs.
Was this review help?
8
1
Share
More Forum Discussions

What is the standard value of intake manifold pressure?

Intake manifold pressure, more accurately referred to as the absolute pressure value of the intake manifold, generally ranges between 40-80 KPA. When the engine is operating, the intake manifold pressure will be lower than atmospheric pressure due to the suction effect created by the downward movement of the piston during the intake stroke. The intake manifold pressure is influenced by the throttle opening, engine speed, and sealing performance: the smaller the throttle opening, the greater the suction effect during intake, resulting in higher intake manifold suction, greater vacuum, and lower intake manifold pressure; the higher the engine speed, the greater the suction effect during intake, leading to higher intake manifold suction, greater vacuum, and lower intake manifold pressure; better sealing performance results in higher intake manifold suction, greater vacuum, and lower intake manifold pressure. The intake manifold is typically made of plastic and is prone to damage during vehicle use. Once the intake manifold is damaged or cracked, air leakage will occur. Air leakage in the intake manifold can produce audible sounds, and the vehicle may experience shaking, unstable idle, weak acceleration, and easy stalling. Severe cracking can even prevent the vehicle from starting. When air leakage is detected in the intake manifold, it should be promptly inspected and repaired at a repair shop. Generally, a leaking intake manifold will be directly replaced with a new one.
18
5
Share

What is the buzzing resonance sound when the Sagitar accelerates?

When the FAW-Volkswagen Sagitar makes a buzzing sound while accelerating, it indicates that the engine oil level is insufficient and needs to be replenished immediately. Once the oil reaches the normal level, the abnormal noise will disappear. More relevant information is as follows: 1. Acceleration time: In the 0-100 km/h acceleration test, the Sagitar achieved a time of 10.18 seconds. During the initial acceleration phase, similar to previous dual-clutch transmissions, a protection program prevents the engine from starting at high RPMs. As a result, the power is not fully released in the initial period, with no wheel spin or front lift, ensuring a smooth start. 2. Transmission: Due to the transmission's intervention program, the power output is limited at the start, and the RPM does not rise quickly. However, the gear shifting speed is indeed good, with responsive reactions and no significant time wasted. The mid-to-late stage power remains ample. The 1.4T low-power version is nearly 2 seconds faster, so the Sagitar does not have a significant advantage in the 0-100 km/h acceleration competition.
15
5
Share

How many liters of transmission oil should be added to the Changan CS35?

Changan CS35 requires approximately 5 liters of transmission oil. Transmission oil is a lubricant that maintains the cleanliness of the gear system, lubricates and extends the life of the transmission components, and has anti-low temperature properties, ensuring effective lubrication even in cold conditions. It also reduces oil loss under harsh operating conditions. Changing transmission oil is not difficult, but selecting, inspecting, and replacing the oil are the most critical steps. More than 80% of transmission failures are caused by deteriorated transmission oil. Therefore, timely inspection and replacement of transmission oil are essential for maintaining the transmission and extending its lifespan. Failing to change transmission oil for a long time can lead to the following risks: 1. Transmission oil deteriorates and evaporates under high-speed and high-temperature conditions, increasing mechanical wear and potentially damaging internal transmission components. 2. Without regular oil changes, the vehicle may experience weak acceleration when starting cold and slight slipping during driving. 3. Over time, transmission oil thickens, which can block the transmission cooler, leading to overheating and increased wear. 4. Delaying oil changes may cause slight slipping and other issues while driving.
20
3
Share

How Long Does It Take for Traffic Violation Records to Update?

According to the 'Procedural Regulations for Handling Road Traffic Safety Violations,' generally, traffic violations can be queried online within 15 days after the violation occurs. The traffic police department may send you a notice by mail, but as long as the violation can be checked online within 15 days, it is not subject to the one-month restriction. The time limit for paying the fine is within 15 days of receiving the notice. Typically, the traffic police send registered mail, so the time you receive the notice can be tracked. Legal basis: Article 88 of the 'Road Traffic Safety Law of the People's Republic of China' stipulates that penalties for road traffic safety violations include: warning, fine, temporary suspension or revocation of motor vehicle driving license, and detention. Article 89 states that pedestrians, passengers, or non-motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined between 5 and 50 yuan. If a non-motor vehicle driver refuses to accept the fine, their non-motor vehicle may be impounded. Article 90 specifies that motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined between 20 and 200 yuan. Other provisions of this Law shall apply where specified.
16
1
Share

What are the specifications of the Sagitar 16-inch wheel hub?

The Sagitar comes with 16-inch wheel hubs. The bolt pattern for the wheel hubs is also 5*112. It is possible to upgrade to 17-inch wheel hubs, but when doing so, it is necessary to replace them with brand tires of the same specifications. Upgrading to larger wheel hubs increases the contact area with the ground, which can lead to higher fuel consumption but also improves driving stability. Pros and cons of upgrading to larger wheel hubs: 1. Larger wheel hubs have a stronger load-bearing capacity; smaller wheel hubs are usually made of steel to save costs, while larger wheel hubs are typically made of aluminum alloy, especially those manufactured using forging techniques. Such wheel hubs can have a load-bearing capacity five times that of ordinary steel wheel hubs. 2. Larger wheel hubs enhance the vehicle's cornering performance; after modifying the wheel hubs, the increased contact area improves the vehicle's stability during cornering, significantly enhancing its cornering performance. 3. Larger wheel hubs can reduce ride comfort; larger wheel sizes can negatively impact ride comfort. Under normal circumstances, the outer diameter of the tire is a fixed value, meaning the larger the wheel hub, the thinner the tire's sidewall will be. This can result in poorer isolation of road noise, leading to increased interior noise and affecting the vehicle's overall quietness.
18
1
Share

What are the models of Hyundai off-road vehicles?

Beijing Hyundai has five off-road vehicle models, namely the ix35, Tucson, All-New Santa Fe, ix25, and Veracruz. The main features include four-wheel drive, higher ground clearance, tires with better grip, elevated exhaust pipes, substantial horsepower, and robust bumpers. 1. Tucson: The All-New Tucson adopts an exclusive exterior design for the Chinese market, featuring a large polygonal grille and matrix-style headlights that create a striking visual effect, with an overall avant-garde appearance. The interior follows the latest family design, maintaining a simple and practical style. 2. ix35: The Hyundai ix35 has shifted from its previous smooth and soft image to a more stylish and rugged look, exuding a strong sense of power in its visual appeal. The interior continues the exterior's style with excellent material quality. In terms of features, the entire lineup comes standard with hill-start assist, rear parking sensors, and more. 3. All-New Santa Fe: The All-New Santa Fe is a premium mid-size luxury SUV under Beijing Hyundai, equipped with a 2.0TGDI direct-injection turbocharged engine that delivers continuous powerful performance and adaptable handling. The storm-edge design showcases a dynamic and sophisticated visual experience, while the 2700mm ultra-long wheelbase, 7-seat luxurious flexible space, and panoramic sunroof create an expansive and luxurious interior. 4. Veracruz: The Hyundai Veracruz is an imported vehicle with smooth and gentle overall exterior lines. Its combined fuel consumption ranges between 12L/100KM to 15L/100KM, positioning it as a high-end SUV model within the Hyundai brand.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.