Why Does Only One Reversing Light Work?

What is the Auto Hold Function in Manual Transmission?

Auto Hold is an automatic braking function that eliminates the need to pull the handbrake once activated. Working Principle of Auto Hold: Through a gradient sensor, the controller provides precise parking force. During startup, the parking control unit calculates data from the clutch distance sensor, clutch engagement speed sensor, and accelerator pedal sensor. The parking brake is automatically released when the driving force exceeds the running resistance, ensuring smooth vehicle starting. Definition of Auto Hold: It refers to the integration of temporary braking during driving and long-term braking after parking, achieved through electronically controlled parking brake technology.

1

Share

Why does the engine speed fluctuate after starting the car?

Reasons for unstable engine speed: Oil accumulation in valves and carbon buildup in throttle: Blockage in the intake tract can cause idle fluctuations, while carbon deposits or oil in the throttle body are the most common causes of unstable idle. Carbon buildup in the throttle affects its opening degree and air intake volume, resulting in erratic engine speed fluctuations after cold starts, accompanied by noticeable vibrations. Spark plug malfunction: Spark plugs can also accumulate carbon deposits, which can be cleaned to restore their activity. However, as spark plugs near the end of their lifespan, their performance may degrade. Fuel line blockage or intake pipe failure: When the fuel line, particularly the fuel injectors, becomes clogged, it leads to insufficient fuel supply pressure, poor fuel atomization, and an imbalanced air-fuel mixture, causing incomplete combustion and related issues. Sensor malfunctions: Faulty sensors can prevent the ECU from accurately controlling the air-fuel ratio. Common examples include malfunctions in the coolant temperature sensor, oxygen sensor, and throttle position sensor.

3

Share

What Causes Excessive Engine Temperature in Motorcycles?

Introduction to the causes of excessive engine temperature in motorcycles: Improper maintenance: For water-cooled engines, insufficient coolant will weaken the performance of the cooling system, thereby affecting the engine's heat dissipation. During motorcycle use, the engine inevitably comes into contact with dust and mud. If not cleaned promptly, this will affect the heat dissipation efficiency of the cooling fins, leading to a decline in the engine's cooling performance. Mechanical failure: Motorcycles have an oil pump inside, whose main function is to deliver lubricating oil to various parts that require lubrication. If the oil pump is damaged, poor lubrication will cause the engine temperature to rise excessively. Improper operation: If the motorcycle is used for extended periods with wide-open throttle, high RPM, low gear, or at maximum speed, it will inevitably cause the engine to overheat.

6

0

Share

Can a motorcycle driver's license that has been expired for over 10 years be renewed?

A motorcycle driver's license that has been expired for over ten years cannot be directly renewed but can be regained through examination. If a motorcycle driver's license is not renewed within one year of expiration, it will be revoked. There is a two-year recovery period after revocation, during which the license can be regained through examination. Relevant regulations: If the expiration period is within two years, the motor vehicle driver can restore their driving qualification by submitting a physical condition certificate. According to the following regulations, if the expiration does not exceed one year, the license can be renewed. If it exceeds one year, the license will be automatically revoked. However, if the expiration does not exceed two years, the driver can apply for restoration. If it exceeds two years, restoration is not possible, and the driver must retake the examination. Submit the following documents: Identity proof of the motor vehicle driver; motor vehicle driver's license; a physical condition certificate issued by a medical institution at or above the county level or a military unit at or above the regimental level. For applications involving special small automatic transmission passenger vehicles for disabled persons, a physical condition certificate issued by a specialized medical institution designated by the provincial health authority must be submitted.

7

1

Share

What Are the Reasons Why a Four-Wheel Electric Vehicle Has No Power?

Four-wheel electric vehicle has no power reasons: Air switch is not on: If the electric vehicle's air switch is in the off state, then when the user turns on the ignition lock, the electric vehicle will have no power. For this problem, the solution is relatively simple—just turn the air switch back on to resolve the issue of the electric vehicle having no power. Loose battery connections: Some users frequently drive on uneven ground, and prolonged shaking can cause the battery connections to loosen, which can also prevent the battery from supplying power normally. When the user turns on the ignition lock, the electric vehicle will have no power. For this problem, you can generally check if the battery connections are loose; if they are, reconnecting them will solve the issue. Ignition lock failure: If the electric vehicle's ignition lock fails, then when the user turns on the ignition lock, the electric vehicle will also have no power. For this problem, the only solutions are generally to take it to a repair shop for maintenance or to replace the ignition lock with a new one to resolve the issue of the electric vehicle having no power. Main line fuse is broken: If the main line fuse of the electric vehicle is blown, then when the user turns on the ignition lock, the electric vehicle will also have no power. For this problem, replacing the fuse will solve the issue of the electric vehicle having no power.

13

3

Share

What is the Function of a Central Differential Lock in 4WD Vehicles?

Central differential lock is a locking mechanism installed on the central differential, used in four-wheel drive vehicles. Its purpose is to enhance the vehicle's off-road capability on poor road surfaces. Specifically, when one driving axle of the vehicle spins freely, it can quickly lock the differential, turning the two driving axles into a rigid connection. Classification of Central Differential Locks: Different differentials employ various locking methods. Common differential locks generally include the following types: forced locking type, high-friction self-locking type, jaw coupling type, Torsen type, and viscous coupling type. Among these, the jaw coupling type is commonly used in medium and heavy-duty trucks. Function of Central Differential Lock: The central differential lock is a locking mechanism installed on the central differential, designed for four-wheel drive vehicles. Its primary function is to improve the vehicle's off-road capability on poor road surfaces. When one driving axle spins freely, it can rapidly lock the differential, converting the two driving axles into a rigid connection. This allows the majority or even all of the torque to be transmitted to the non-slipping driving axle, fully utilizing its adhesion to generate sufficient traction, enabling the vehicle to continue moving forward.

17

1

Share

Why Does Only One Reversing Light Work?

What is the Auto Hold Function in Manual Transmission?

Why does the engine speed fluctuate after starting the car?

What Causes Excessive Engine Temperature in Motorcycles?

Can a motorcycle driver's license that has been expired for over 10 years be renewed?

What Are the Reasons Why a Four-Wheel Electric Vehicle Has No Power?

What is the Function of a Central Differential Lock in 4WD Vehicles?

Why Does the Electric Power Steering Become Heavier?

What to Do When There is Condensation in Car Lights?

How Long Can You Stay in a Car Before Suffocating?

How to Start a Mondeo When the Key Fob Battery is Dead?