Why Does Maybach Have Yellow License Plates?

What is the difference between position lights and daytime running lights?

Position lights are usually turned on after dusk and are mainly used to indicate the width and height of the car while driving. Typically, position lights are white in the front and red in the rear. Daytime running lights are designed to make the vehicle more noticeable during daytime driving. Their purpose is not to help the driver see the road, so they are not lighting fixtures but rather signal lights. Here are the detailed differences: 1. Position lights are located at all four corners of the vehicle, both front and rear, while daytime running lights are only at the front. 2. Position lights need to be turned on manually, whereas daytime running lights turn on automatically as soon as the car starts and turn off when the engine is shut off. 3. Position lights are usually tungsten filament bulbs (halogen lights) with a yellowish and dimmer light, while daytime running lights are typically LED lights. 4. However, many modern cars use the same light for both front position lights and daytime running lights, with the position light mode being dimmer than the daytime running light mode.

10

4

Share

Is the Wuling Hongguang eligible for the 6-year inspection exemption?

Wuling Hongguang is not classified as a minivan but as an MPV model, so it fully qualifies for the new 6-year inspection exemption policy. Below is expanded information on the conditions for obtaining the inspection exemption mark for 6-year-exempt vehicles: 1. The exemption applies to non-commercial passenger cars (including large cars) and other small and mini passenger vehicles registered within 6 years; 2. It excludes minivans and vehicles with 7 or more seats; 3. It does not apply to vehicles that have not been registered for over 4 years since the manufacturing date; 4. The vehicle must not have been involved in any injury-causing traffic accidents. 5. Before applying for the inspection exemption mark, all traffic violations and accident records related to the vehicle must be resolved.

12

5

Share

How to adjust the height of Leiling headlights?

Toyota Leiling headlights can be adjusted both automatically inside the car and manually outside. For automatic adjustment, simply use the buttons inside the car. For manual adjustment, a cross-head screwdriver is required to adjust the headlights from the back. Below are the steps for adjusting the headlights: 1. Turn on the high beams and stand in front of the headlights with your feet as close to the headlights as possible. Observe where the high beams hit your feet, identify the center point of the light (the brightest spot of the light beam), and remember it. 2. Then move to a wall, stand vertically against it, and mark the position of the light center on the wall based on the position on your feet. 3. Use a screwdriver to rotate the adjustment gear on the headlight to align the light center with the mark on the wall (the vertical distance should not exceed 10 cm). 4. If there is no one else in the car while adjusting the lights, you can slightly raise the light center (generally no more than 5 cm). The reason is simple: an empty car sits higher, and when loaded with passengers, the car will sink a bit. Raising the light center slightly allows for some adjustment margin. 5. When adjusting vertically, the movement of the light center is very noticeable. However, when adjusting horizontally, the light center moves less noticeably, requiring several turns of the screwdriver to see a slight movement. So, don’t worry if the light center doesn’t move horizontally; just keep turning the screwdriver until the light center aligns with the mark you made. 6. Once both headlights' light centers are aligned with the marks, stand in front of the car (a bit farther away) and observe the light beams to ensure they are projecting straight forward, as there might have been some deviation when you moved to the wall to make the marks.

12

4

Share

Can Modified Seats Pass the Annual Inspection?

Seat modification falls under interior modification and generally does not affect the normal annual inspection, meaning it can pass the inspection. Most interior modifications involve upgrading seats to leather or adding decorative elements to the dashboard, which typically do not compromise driving safety and thus do not impact the annual inspection. Below is supplementary information on car seat modifications: 1. Car seats are a prominent part of the interior and serve as components for passenger seating, making them a common target for modifications by owners. Changes can range from simple seat cover replacements to installing more luxurious, feature-rich seats. 2. Seat modifications are usually based on personal preferences or the vehicle's class. High-end vehicles often opt for leather seats, while more budget-friendly cars may stick to simpler fabric seats. 3. However, the number and layout of vehicle seats must not be altered. Even if reported to vehicle management authorities, such changes will not be approved, as unauthorized modifications to the vehicle's internal structure or purpose constitute illegal modifications. If discovered during the annual inspection, vehicle management authorities may require the owner to restore the original setup. Therefore, it is advisable to consult the local vehicle management office before proceeding with any modifications.

14

1

Share

How many kilometers can three bars of fuel run?

With three bars of fuel, a car can generally run about 150 kilometers. One small bar represents approximately 3L to 4L of fuel, so three small bars equate to around 10L. If the car's fuel consumption is 6L to 7L per 100 kilometers, running 150 kilometers with three small bars of fuel is feasible. However, when the fuel gauge shows only three bars, it indicates low fuel, and you should refuel as soon as possible. More details are as follows: 1. The distance a car can run depends on the model and engine displacement, as not all cars can run the same distance due to differences in model and displacement. 2. Simply put, if there is a small display on the dashboard showing the remaining distance, you can estimate the car's displacement from this information. 3. If the fuel gauge shows only three bars remaining, pay attention to the fuel level and avoid letting it get too low, as this can affect the car's cooling, lubrication, and fuel pump.

15

4

Share

How to Replace the Cabin Air Filter of a Jeep Compass?

The cabin air filter model for the Jeep Compass is the SDBL31638 from Saint De Paul. Below are the steps to replace the cabin air filter for the Jeep Compass: 1. First, open the glove box cover. 2. Locate the fixing buckle on the right side of the glove box and pull it outward firmly. 3. Remove the fixing buckle of the glove box cover. 4. Use both hands to squeeze the sides of the glove box towards the center to detach it. 5. After removing the glove box, you will see the cabin air filter cover. Press the fixing buckles on both sides of the cover firmly to remove it. 6. Pull the old cabin air filter outward and replace it with a new one. The cabin air filter ensures that the air conditioning system fits tightly against the housing, preventing unfiltered air from entering the cabin. It also separates solid impurities like dust, pollen, and grinding particles from the air, and absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc.

7

5

Share

Why Does Maybach Have Yellow License Plates?

What is the difference between position lights and daytime running lights?

Is the Wuling Hongguang eligible for the 6-year inspection exemption?

How to adjust the height of Leiling headlights?

Can Modified Seats Pass the Annual Inspection?

How many kilometers can three bars of fuel run?

How to Replace the Cabin Air Filter of a Jeep Compass?

What is a Left-Turn Waiting Zone?

How to Check the Production Date of Michelin Tires?

Where is the keyhole for the Baojun 510?

Are there service areas on national highways?