Why does it suddenly show low tire pressure?

2 Answers
Lucian
07/24/25 10:32pm
Sudden low tire pressure warnings may occur due to: Tire pressure imbalance: When one tire has significantly lower pressure, high-speed driving increases tire temperature and pressure. In this case, promptly stop to rest or replace with a spare tire. Slow air leakage: Use a tire pressure gauge to check. If pressure is low, inflate the tire and monitor the warning light. Tire maintenance tips: Regular inspection: Frequent checks can prevent hazards like blowouts. Regular cleaning: Remove stones or debris from tread grooves to avoid deformation. Drive cautiously: Never exceed speed limits or road conditions. Reduce speed when turning or approaching potholes.
Was this review help?
16
4
Share
CaydenLynn
08/10/25 3:03pm
I suddenly saw the low tire pressure warning while driving, which happened during a business trip. Upon inspection, I found a nail had punctured the right front tire, causing a leak. Sometimes, this can also happen when the weather turns cold, especially in autumn and winter, as cold tire pressure naturally decreases but should rise again after driving. If the warning light suddenly comes on, you need to be cautious—it might indicate the tire has been punctured by a sharp object or the valve core is loose. I’ve also experienced slow leaks due to wheel rim corrosion, leading to a gradual drop in pressure. The best approach is to pull over immediately and use a portable pressure gauge to check the pressure, ensuring it’s within the manufacturer’s recommended range (usually indicated on a label on the door), to avoid further driving that could damage the wheel rim or increase fuel consumption. Regularly checking tire pressure once a month is essential; otherwise, over time, it can affect handling safety and even increase the risk of a blowout.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What is the method for resetting data after replacing the battery in a Tiguan?

Turn off the ignition switch and shut down the engine. Press and hold the right zero reset button on the dashboard with your left hand while turning on the ignition switch. Continue holding the zero reset button with your left hand until the maintenance light enters the reset mode. Release the right zero/reset button, then press the left menu time setting button once to confirm the reset.
7
1
Share

Parallel Parking Tips?

Parallel parking tips are as follows: 1. Maintain a distance of about 1m between vehicles: First, observe whether the target parking space is suitable. After confirmation, drive past the parking space, align the right rearview mirror with the B-pillar of the adjacent vehicle, and maintain a distance of about 1m between the two vehicles. Then, turn the steering wheel fully to the right. 2. Reverse the steering wheel when you see the right headlight of the rear vehicle in the left rearview mirror: Then, keep the steering wheel turned fully to the right and slowly reverse. When you see the right headlight of the rear vehicle in the left rearview mirror, quickly turn the steering wheel fully to the left (or turn the wheel in place) and continue reversing. During this process, you can slightly lower the right rearview mirror to observe the distance between the right rear wheel and the curb. Control the steering wheel to bring the vehicle as close to the curb as possible, but be sure to leave enough distance to straighten the car body. As the car body gradually straightens, pay attention to the distance from the rear vehicle. At this point, you can use the parking radar/image for judgment or turn your head to look.
12
3
Share

What is the repair method for a car sun visor pivot?

The clip of the sun visor's pivot is made of plastic, and it might not be inserted properly. You can try tightening the screw. If the sun visor is damaged and cannot be used anymore, the only option is to purchase a new sun visor from a 4S store for replacement. Alternatively, you can also buy your own replacement parts online to repair the sun visor.
1
0
Share

How to Determine if a Vehicle Meets China 5 Emission Standards

Methods to check if a vehicle meets China 5 emission standards: 1. You can identify the emission standard of the vehicle by checking the vehicle's factory certificate, environmental standard list, or vehicle conformity certificate. 2. Log in to the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center or bring the vehicle registration certificate to the vehicle management office for inquiry. Below are the hazards of vehicle exhaust: 1. Exhaust gases: Vehicle exhaust contains 150 to 200 different compounds. Since vehicle exhaust is emitted mainly between 0.3 meters and 2 meters above the ground, which is within the human breathing range, it poses severe health risks. The most harmful components to humans include carbon monoxide, hydrocarbons, nitrogen oxides, and solid suspended particles. 2. Solid suspended particles: The composition of solid suspended particles is complex and has strong adsorption capabilities, allowing them to adsorb various metal dust, highly carcinogenic substances like benzopyrene, and pathogenic microorganisms. 3. Carbon monoxide: Carbon monoxide enters the bloodstream through the respiratory system and combines with hemoglobin to form carboxyhemoglobin, thereby impairing the blood's ability to deliver oxygen to tissues and harming the central nervous system.
13
3
Share

What to Do If You Mistakenly Enter a Non-Existent Waiting Zone?

It's not a problem. If you enter the waiting zone and the light suddenly changes from green to red without a yellow transition, you can still proceed as long as you passed the stop line when the light was green. According to the relevant regulations in the Road Traffic Safety Law Implementation Ordinance, as long as your vehicle crosses the stop line before the red light turns on, it is not considered running a red light.
1
4
Share

What happens if I don't attend the traffic duty in Subject 3?

Explain to your instructor. For obtaining a driver's license, traffic duty is required after passing the exams from Subject 1 to Subject 3. The applicant needs to register for traffic duty at the local traffic police station. Only after completing the traffic duty can you schedule the exam for Subject 4. In some regions, traffic duty is required right after passing the Subject 2 exam.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.