Why Does It Still Show Low Tire Pressure After Inflating?

1 Answers
SanCassandra
07/29/25 10:52am
After inflating, the reason it still indicates insufficient tire pressure is because the tire pressure has not been recalibrated. Simply recalibrate the tire pressure on the central control panel. Tire Pressure Maintenance: Before traveling, observe the condition of the tires. While driving, pay attention to the sound of friction between the tires and the ground, feel the cushioning effect when driving over uneven roads, and notice if there are any changes in acceleration when pressing the gas compared to usual. Normally, check and replenish the tire pressure at a professional tire repair shop every week. The Relationship Between Tire Pressure and Performance: The relationship between tire pressure and load capacity: tire pressure is an indicator of a vehicle's load capacity. The size of the vehicle's load depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity.
Was this review help?
5
4
Share
More Forum Discussions

Is Blue Shell HX7 Plus a Fully Synthetic Lubricant?

Blue Shell HX7 Plus is not fully synthetic; it is a semi-synthetic lubricant. Blue Shell HX7 Plus offers better performance than mineral lubricants and is priced lower than fully synthetic oils. It is more suitable for economical cars priced under 200,000 yuan that prioritize cost-effectiveness, especially models equipped with turbocharged engines or diesel engines. Here are some detailed introductions about it: Blue Shell engine oil is manufactured using Shell's PurePlus technology, which provides benefits such as superior performance in viscosity stability, anti-wear properties, and low volatility. It helps extend engine life, reduce maintenance costs and oil consumption, improve fuel economy, and better maintain engine cleanliness. It also helps prolong engine life by preventing wear and is suitable for gasoline, diesel, and natural gas engines, as well as biodiesel and gasoline/ethanol blended fuels.
17
1
Share

What to Do When Car Windows Frost Over in the Morning?

When the windshield frosts over in the morning, you can use a scraper to remove the ice from the warm windshield, spray de-icer on the windshield, or turn on the car's heating mode. Scraper Method: Prepare a hard plastic scraper, put on gloves, and then use the scraper to gradually work from the edge of the ice inward, separating the ice from the windshield to remove it. De-icer Treatment: Purchase a specialized spray de-icer from the market, follow the instructions on the packaging, spray it on the car's windshield, wait for five to ten minutes for the ice to melt, and then use the wipers to clear it away. Heating Method: Start the car, wait for the temperature to rise, then turn on the heating mode inside the car, and direct the vents toward the windshield to melt the ice on it.
2
0
Share

Is it allowed to drive shirtless?

Driving shirtless is permitted. There is no fine for driving shirtless, but it does not conform to the norms of civilized driving. Similar behaviors include driving in slippers. Although these actions are not considered traffic violations, traffic police have the authority to educate the driver. Precautions for civilized driving: Driving actions should be standardized, and driving habits should be proper: The correct driving method is "safe driving starts with the correct driving posture." Drivers must pay attention to the learning and training of driving skills, master vehicle driving skills proficiently, and improve their ability to drive safely. Keep in mind the principles of "staying focused, observing carefully, and preventing in advance": Reduce speed when driving on unclear or dangerous and complex road sections; slow down and observe when approaching intersections without traffic signals, yield according to regulations, pass quickly if it is confirmed to be safe, and wait outside the intersection for a safe opportunity if it is confirmed to be unsafe.
7
5
Share

What are the Five Major Tools in the Automotive Industry?

Five major tools include APQP, FMEA, PPAP, SPC, and MSA. These five core quality tools are often referred to as the 'TS Five Core Quality Tools.' In fact, these tools were developed by the North American AIAG—Automotive Industry Action Group (AIAG was initiated by the three major American automotive groups: Ford, GM, and Chrysler). Below is an introduction to the related content: 1. Advanced Product Quality Planning (APQP); 2. Production Part Approval Process (PPAP); 3. Statistical Process Control (SPC); 4. Measure System Analyse (MSA); 5. Failure Mode & Effect Analyse (FMEA).
7
2
Share

Is the at-fault party only responsible for vehicle repairs?

Certainly not. Since the other party is fully at fault, compensation should cover not only vehicle damage but also personal injuries, damaged items, and other related losses. Here is relevant information about traffic accidents: 1. Introduction to Traffic Accidents: Refers to incidents where vehicles cause personal injuries or property damage on the road due to fault or accident. Traffic accidents can result not only from violations of road traffic safety regulations by unspecified individuals but also from irresistible natural disasters such as earthquakes, typhoons, flash floods, and lightning strikes. 2. Evaluation Metrics for Traffic Accidents: The traffic accident rate (traffic-accident-rate) is an indicator used to assess the frequency of traffic accidents. There are three commonly used accident rates: population accident rate, vehicle accident rate, and operational accident rate.
16
0
Share

How to Polish Scratches on Chrome Surfaces?

You can use chrome polish wax to address the issue. Below is relevant information about ceramic coating: 1. Introduction to ceramic coating: Applying ceramic coating is like cleansing your face with facial cleanser, exfoliating, then applying lotion and sunscreen, plus wearing a "mask" - this creates a dense protective layer. The "coating" refers to materials derived from glass atoms and molecules ground to below 100 nanometers. 2. Benefits of ceramic coating: Strong water resistance. Nano-ceramic coated surfaces exhibit superhydrophobic properties. When water falls on the vehicle surface, it beads up like lotus leaves, preventing water scale formation and protecting paint from contamination. Heat resistance. The nano-ceramic coating creates a glass-like crystalline layer that effectively reflects sunlight and radiation during hot summer days, providing heat resistance and preventing high-temperature damage to the paint.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.