···
Log in / Register

Why Does a New Car Make Noise When Turning the Steering Wheel in Place?

6Answers
McAllison
09/03/2025, 02:28:45 AM

There are several main reasons why a new car makes noise when turning the steering wheel in place: Sound from the turn signal rebound clip: If the noise occurs only after activating the turn signal switch and then turning the steering wheel, it is likely the sound from the rebound clip of the turn signal auto-return mechanism. This sound is a normal phenomenon. Sound from the steering column dust cover: Check the steering column dust cover. If the dust cover lacks lubrication, it can produce a dry friction noise. Applying some grease inside the dust cover will eliminate this sound. Sound from interference with the clockspring: Remove the steering wheel clockspring and apply some grease to see if the noise persists. If it still makes noise, replace the clockspring.

Was this review help?
108
Share
MacAmara
09/15/2025, 03:53:35 AM

As someone who frequently repairs cars, I've encountered many cases where new cars make strange noises when turning the steering wheel while stationary. This usually isn't a major issue, but it still requires attention. The most common source is the steering system - for instance, air bubbles in the power steering pump or insufficient lubrication, which might not have been properly addressed during the new car assembly. If the steering rack hasn't been fully broken in, it can also easily produce creaking sounds. Another reason could be the squeaking noise caused by tires rubbing against the ground when stationary, especially on rough surfaces. I recommend driving to a 4S shop or professional repair center immediately for inspection, as they have the proper equipment to diagnose the issue accurately. New cars are generally still under warranty, so avoid tampering with screws yourself to prevent voiding the warranty. Safe driving is crucial - ignoring these noises for too long can lead to component wear and affect steering precision. Getting it fixed early saves money and gives peace of mind.

Was this review help?
6
Share
Expand All
StLawson
10/29/2025, 04:32:53 AM

From my experience as a veteran driver with over a decade behind the wheel, it's quite common for new cars to make strange noises when turning the steering wheel while stationary. I encountered similar sounds when my car was new, and later realized it's mostly part of the normal break-in period. The steering system has hydraulic pumps or electric power components that may produce friction noises when not yet running smoothly. The tires squeaking as they slip on the ground is also normal. I suggest you identify the sound source - if it's from the steering wheel area, it might need lubrication or adjustment; if it's from the wheels, it could be a suspension issue. Don't worry too much, as these noises usually disappear after a few days of driving. However, if the sound persists or worsens, do visit a repair shop. Cars are like people - they need time to break in and adapt to their environment. Regular check-ups and maintenance can prevent such minor issues.

Was this review help?
9
Share
Expand All
StAnderson
12/12/2025, 03:45:11 AM

I bought a new car and noticed a creaking sound when turning the steering wheel while stationary after a month of driving, which gave me a scare. There could be several possible reasons, such as insufficient lubrication of the steering gears or a loose screw from the initial assembly. The sound might also come from tire friction with the ground, especially on concrete surfaces. I recommend trying to turn the steering wheel a few times while stationary to see if the noise disappears, or turning on the air conditioning to let the system run and observe. New cars come with a warranty, so just call the dealership—they'll inspect it for free, and a simple adjustment might solve the issue. Don’t wait too long to address it, as it could worsen and affect steering performance. Regular maintenance ensures a worry-free driving experience.

Was this review help?
2
Share
Expand All
Marlene
02/01/2026, 09:57:52 PM

As someone who drives daily to pick up and drop off kids at home, I'm very concerned about safety when there are abnormal noises in a new car. A noise when turning the steering wheel while stationary is mostly a mechanical issue, such as a misaligned component in the steering system or insufficient lubrication causing friction. Mismatched tires and road surfaces can also cause squeaking. I suggest not trying to fix it yourself but instead taking it directly to a professional mechanic or the dealership—they're experts and can quickly resolve the issue. Since the car is still under warranty, repairs are usually free. Safety comes first; ignoring strange noises could lead to steering failure, which is extremely dangerous at high speeds. Regular lubrication and maintenance during daily driving can help extend the car's lifespan.

Was this review help?
5
Share
Expand All
PaisleeLee
04/27/2026, 02:58:29 PM

I'm passionate about delving into automotive details, and the squeaking sound when turning the steering wheel of a new car while stationary is quite fascinating! This could stem from vibrations in the steering rack or a mismatch in the power assist system, as components during the break-in period may not fit tightly enough. Suspension bearings can sometimes produce a clicking sound too. Electric power steering is quieter than hydraulic systems, but new cars can still have minor quirks. I recommend observing the sound's rhythm—if it's continuous, it's likely a system issue; an occasional squeak is probably just tire friction. Don't attempt random fixes; use professional diagnostic tools to pinpoint the root cause. Automotive technology evolves rapidly, and understanding these nuances enhances the joy of driving. Address it early to ensure your steering remains agile and reliable.

Was this review help?
7
Share
Expand All
More Q&A

What is the Engine Oil Viscosity Grade Chart?

The viscosity grade of engine oil is closely related to the vehicle model and local temperature. Below is an introduction to vehicle models and grades: 1. Vehicle Models: Japanese cars primarily use low-viscosity oil, while German cars primarily use high-viscosity oil. 2. Grades: (1) 0W suitable temperature: -35°C (polar regions). (2) 5W suitable temperature: -30°C (northeast and northwest regions). (3) 10W suitable temperature: -25°C (central and southwestern parts of northern China). (4) 15W suitable temperature: -20°C (central and southwestern parts of northern China). (5) 20W suitable temperature: -15°C (areas south of the Yellow River and north of the Yangtze River). (6) 25W suitable temperature: -10°C (subtropical regions).
103
Share

How many points are deducted for rolling back on a slope?

In the Subject 2 driving test, rolling back more than 30 cm after stopping will result in a 100-point deduction; rolling back less than 30 cm after stopping will result in a 10-point deduction (previously 20 points). Below are other relevant regulations for the Subject 2 test: 1. Failure to stop at the designated point results in a 100-point deduction; if the vehicle's front bumper does not reach the control line after stopping, a 100-point deduction is applied. 2. Rolling back more than 30 cm after stopping results in a 100-point deduction; rolling back less than 30 cm after stopping results in a 10-point deduction (previously 20 points). 3. Failing to turn on the left turn signal when starting results in a 10-point deduction. 4. Driving over the solid edge line of the road results in a 100-point deduction. 5. If the front bumper does not reach the stop line after stopping, a 10-point deduction is applied (previously 20 points); if the right front wheel is more than 30 cm away from the edge line when stopping, a 10-point deduction is applied (previously 20 points). 6. Taking more than 30 seconds to start results in a 100-point deduction.
103
Share

What kind of engine oil should be used for the 2019 Audi A4L?

2019 Audi A4L uses 5W-30 fully synthetic engine oil. Below is the relevant introduction about engine oil: 1. Functions of engine oil: The main functions of engine oil are lubrication, cleaning, and heat dissipation. In fact, many parts of the vehicle use engine oil, but the engine oil that needs to be replaced every 5000 kilometers refers to the engine oil. 2. Differences and replacement intervals of engine oil: Engine oil can be divided into mineral engine oil, semi-synthetic engine oil, and fully synthetic engine oil. If mineral engine oil is used, it generally needs to be replaced every six months or about 5000 kilometers; if semi-synthetic engine oil is used, it should be replaced every 7-8 months or about 7500 kilometers; if fully synthetic engine oil is used, it can be replaced after driving for about one year or 10,000 kilometers.
118
Share

What is the difference between PU car wrap and TPU car wrap?

TPU and PU both belong to polyurethane, but TPU is a thermoplastic polyurethane, which outperforms PU in terms of properties and is currently the preferred material recommended by renowned invisible car wrap brands. The details are as follows: 1. PU: PU is polyurethane, widely used in chemical, electronic, textile, and medical fields. However, it is not suitable for application on car paint surfaces because PU material is relatively soft with weak tensile properties, making it unsuitable for paint protection film installation. PU material is soft, has weak tensile strength (unable to wrap curved areas of the car body during installation), cannot repair scratches, and is prone to yellowing. 2. TPU: TPU is a thermoplastic polyurethane elastomer rubber with a wide range of hardness and high elasticity. It can withstand a broad temperature range while maintaining flexibility. The surface of TPU has a coating structure, enabling it to resist stains, corrosion, and scratches, with strong UV resistance. TPU material is technologically advanced, highly elastic, stretchable, stable, and offers excellent stain resistance, corrosion resistance, and UV protection. Additionally, minor scratches can quickly self-repair at room temperature.
120
Share

What does the yellow engine dashboard light mean?

Here are the reasons that may cause the yellow engine light to illuminate: 1. Sensor issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine warning light. 2. Maintenance problems: Poor engine maintenance is the most common cause of the engine warning light coming on. All vehicles have specific maintenance schedules. If the owner fails to perform regular maintenance combined with poor driving habits, it will increase the operational burden on the engine, ultimately triggering the yellow warning light as an alert.
112
Share

Does a motor vehicle need to undergo an on-site inspection in its sixth year?

Motor vehicles are required to undergo an annual on-site inspection in their sixth year. Below are the specific regulations for vehicle annual inspections: 1. Passenger transport vehicles: Must be inspected once a year within the first 5 years; after 5 years, inspections are required every 6 months. 2. Trucks and large or medium-sized non-passenger transport vehicles: Must be inspected once a year within the first 10 years; after 10 years, inspections are required every 6 months. 3. Small and mini non-passenger transport vehicles: Must be inspected once every 2 years within the first 6 years; after 6 years, inspections are required once a year; after 15 years, inspections are required every 6 months. 4. Exemption policy: Family cars with 6 seats or fewer enjoy a 6-year exemption from on-site inspections. The prerequisite for this exemption is that no major traffic accidents occur during this period. If an accident occurs, an on-site inspection is mandatory. Vehicles with 7 seats or more do not qualify for the 6-year exemption and must still undergo inspections every 2 years during the first 6 years.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.