···
Log in / Register

Why Does a Car's Steering Wheel Pull to One Side?

1 Answers
StKira
08/26/25 4:06am

The reasons for a car's steering wheel pulling to one side include the following: 1. Uneven tire pressure on both sides: The higher the tire pressure, the smaller the contact area with the ground, resulting in less rolling resistance. The vehicle will tend to pull toward the side with relatively lower tire pressure. 2. Uneven tread wear on both sides: The tire surface has a layer of rubber tread with a certain thickness. As the vehicle is used, the tread thickness gradually decreases. A tire with more tread wear effectively has a smaller diameter, causing the vehicle to pull toward the side with more tread wear. 3. Poor brake caliper piston retraction on one side: If the brake piston on one wheel does not retract properly, it will increase the rolling resistance on that side, causing the vehicle to pull toward the side with higher resistance. 4. Incorrect wheel alignment: If the camber angles of the wheels on both sides are inconsistent, the vehicle will tend to pull toward the side with a larger outward tilt angle.

Was this review help?
18
4
Share
More Forum Discussions

What is the 0-100 km/h acceleration time of the Nissan Patrol 4.0?

The 0-100 km/h acceleration time of the Nissan Patrol 4.0 is approximately 9 seconds. The 0-100 km/h acceleration refers to the time it takes to accelerate from 0 to 100 kilometers per hour, which is an intuitive reflection of a vehicle's power. The Patrol is a rugged off-road vehicle under the Nissan brand, equipped with two engines: one is a 4.0-liter naturally aspirated engine, and the other is a 5.6-liter naturally aspirated engine. The 4.0-liter naturally aspirated engine has a maximum power of 205 kilowatts, a maximum torque of 394 Newton-meters, a maximum power speed of 5,600 revolutions per minute, and a maximum torque speed of 4,000 revolutions per minute. The 5.6-liter naturally aspirated engine has a maximum power of 293 kilowatts, a maximum torque of 555 Newton-meters, a maximum power speed of 5,800 revolutions per minute, and a maximum torque speed of 4,000 revolutions per minute.
16
1
Share

How to Push-Start a Car?

To push-start a car, follow these steps: 1. Turn the key to the ON position to power the vehicle, but do not manually turn the key to ignite; 2. Press the clutch and shift into second or third gear; 3. When the pushing speed reaches about 10 kilometers per hour, release the clutch while simultaneously applying throttle assistance; 4. When there are signs of the engine starting accompanied by operational sounds, quickly press the clutch, shift to neutral, and control the throttle to complete the startup. Reasons for difficulty in starting a car include: 1. Air leaks in the intake system; 2. Low fuel pressure; 3. Clogged air filter; 4. Faulty water temperature sensor; 5. Malfunctioning air flow meter; 6. Issues with the idle control valve or additional air valve; 7. Non-functioning cold start injector; 8. Leaking fuel injector; 9. Incorrect ignition timing; 10. Broken wiring from the start switch to the computer; 11. Too low cylinder compression pressure.
5
5
Share

Is the Volkswagen Tayron from FAW or SAIC?

Volkswagen Tayron is from FAW, a mid-size SUV positioned as a high-end mid-size model targeting young consumers. The Tayron is equipped with three engines: a 1.4-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine has a maximum power of 110 kW, a maximum torque of 250 Nm, a maximum power speed of 5000 to 6000 rpm, and a maximum torque speed of 1750 to 3000 rpm. The low-power version of the 2.0-liter turbocharged engine has a maximum power of 137 kW, a maximum torque of 320 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed of 1600 to 4000 rpm. The high-power version of the 2.0-liter turbocharged engine has a maximum power of 162 kW, a maximum torque of 350 Nm, a maximum power speed of 4500 to 6200 rpm, and a maximum torque speed of 1500 to 4400 rpm.
7
2
Share

Which is better, tire grade H or T?

Tire grade H is better than T. The T marking on a tire indicates that the maximum operating speed of the tire is 190 km/h, while the H marking represents a maximum speed of 210 km/h. These letters denote the speed rating of the tire, and generally, the further the letter is in the alphabet, the better the tire's performance. Meaning of letters and numbers on tires: Single-letter markings on tires represent the speed rating. If four consecutive numbers appear on the tire, they indicate the production date of the tire. For example, the number 1713 means the tire was produced in the 17th week of 2013. The last two digits represent the year, and the first two digits indicate the production week. Tire speed ratings: Tires with different speed ratings have different applications. P—T grade tires (maximum speed 150—190 km/h) are suitable for small and compact cars, U—V grade tires (maximum speed 200—240 km/h) are suitable for mid-to-high-end sedans, and the highest-performance W—Z tires, which can withstand speeds between 240—300 km/h, are typically used in large luxury sedans and supercars.
9
1
Share

Where is the trunk opening button of the Tayron located?

The trunk opening button of the Tayron is located on the door panel of the driver's side door. Pressing this switch will open the trunk lid. The Tayron is a midsize SUV under the Volkswagen brand, equipped with three engine options: a 1.4-liter turbocharged engine, a low-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5000 to 6000 rpm and the maximum torque available between 1750 to 3000 rpm. The low-power version 2.0-liter turbocharged engine produces a maximum power of 137 kW and a maximum torque of 320 Nm, reaching its maximum power at 5000 rpm and maximum torque between 1600 to 4000 rpm. The high-power version 2.0-liter turbocharged engine offers a maximum power of 162 kW and a maximum torque of 350 Nm, with the maximum power achieved between 4500 to 6200 rpm and the maximum torque available from 1500 to 4400 rpm.
7
3
Share

What Causes the Buzzing Sound After Starting the Car?

Possible reasons for the buzzing sound in the vehicle include: uneven tire tread blocks or severe wear; imminent damage to the wheel hubs of certain wheels, with the most direct symptom of hub failure being an increase in the buzzing sound as the vehicle speed rises, which then maintains a constant volume after reaching a certain speed. Here is additional information: 1. Requirements for interior noise: According to the "Technical Conditions for Motor Vehicle Operation Safety" issued and implemented by the former National Technical Supervision Bureau on January 1, 1998, the interior noise level of passenger vehicles should not exceed 82 decibels; the noise level near the driver's ear should not exceed 90 decibels. Interior noise levels below 60 decibels are generally acceptable, while 40-60 decibels represent normal conversation levels. 2. Sources of interior noise: a. The vehicle's engine is a source of noise, which can be generated and transmitted through the front fenders, hood, firewall, and exhaust pipe. b. Road noise is produced when the vehicle is driven at high speeds, caused by wind cutting in and vibrations from the chassis, as well as the impact of sand and gravel on the road against the vehicle's chassis.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.