···
Log in / Register

Why Do Windshield Wipers Make Noise?

4 Answers
Geoffrey
07/23/25 10:02pm
The reasons for windshield wiper noise are: 1. The wiper blade itself is aged, deformed, or there is a foreign object between it and the windshield; 2. There is an oil film on the windshield; 3. The downward pressure of the wiper arm is not perpendicular to the windshield surface, causing friction between the wiper blade and the windshield when moving up or down, resulting in noise. The solutions for wiper noise are: 1. Replace the wiper; 2. Clean any foreign objects on or under the wiper blade to ensure the wiper area is clean; 3. Wash off dirt and grease from the windshield; 4. Adjust the angle of the wiper arm so that the wiper blade is perpendicular to the windshield. The function of windshield wipers is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety.
Was this review help?
17
1
Share
SanRobert
08/10/25 5:46pm
Oh dear, as an experienced driver, I've encountered quite a few embarrassing situations with squeaky wipers! Usually, it's because the wiper blades have aged and hardened, with the rubber losing elasticity due to exposure to wind and sun, causing them to squeak when wiping. Oil stains, dust, or bird droppings on the windshield can also cause friction noise. Additionally, improper installation or looseness of the wiper arms can lead to unsteady movement. I remember the last time my car's wipers were making a terrible noise—it was winter, and they had frozen solid after being parked outside, making an awful sound against the glass. Safety is no joke; noise can distract you while driving, so it's important to address the issue promptly. I recommend checking the wiper blades monthly and replacing them if cracks are found; clean the windshield with glass cleaner; and use windshield washer fluid to moisten the blades in dry weather. Don't wait until it rains to regret not taking action, as it could damage the wiper motor. For a worry-free drive, regular maintenance is key.
Was this review help?
17
3
Share
Expand All
LaFaith
09/23/25 5:49am
As a new female driver, the sound of windshield wipers drives me crazy! The main reasons are usually worn wiper blades or a dirty windshield. Over time, the rubber on wipers hardens, making a creaking noise like old rubber boots. Residual oil film, leaf debris, or chemical contamination on the windshield can also cause issues. I tried cleaning the windshield thoroughly in a parking lot, and the noise stopped immediately. If the noise gets worse in hot summer weather, remember to spray some wiper fluid or water for lubrication. Ignoring it isn't just annoying—it could also damage the wiper mechanism over time, leading to costly repairs. After learning my lesson, I now replace wiper blades every quarter, choosing durable brands with flexible rubber. Before driving, I always check to ensure clear visibility for a safe journey.
Was this review help?
3
3
Share
Expand All
Ulysses
11/06/25 8:05am
Wiper noise is quite common, with typical causes including hardened or aged wiper blades, dirty windshields causing friction sounds, loose wiper arms, or faulty wiper motors. The solutions are straightforward: replace the wiper blades, clean the glass surface, and ensure proper connection of the mechanism. Regular maintenance can prevent noise and enhance driving comfort.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What is the ACTYON car?

ACTYON is the SsangYong Actyon, known as 'Actyon' in Chinese. More details about the SsangYong Actyon are as follows: 1. The Actyon is a hybrid crossover SUV under the SsangYong brand. As a truly confident brand, the ActYon showcases its advanced brand heritage and technical sophistication in its configuration. 2. The ActYon features a sporty coupe-like design, with a handsome and bold style, fully reflecting the fashion, individuality, and passion that young people pursue today. 3. The new ActYon has body dimensions of 4455×1880×1740mm.
14
0
Share

Why is the engine indicator light constantly illuminated in yellow?

The engine malfunction light illuminating in yellow indicates a fault in the engine. Below are the specific reasons: 1. The gasoline used may be of poor quality or there may be excessive carbon buildup in the engine, leading to poor combustion conditions, which could trigger the malfunction light. In such cases, it is advisable to promptly inspect the engine and seek maintenance at the nearest vehicle repair shop. 2. A faulty oxygen sensor in the engine often causes the engine malfunction light to illuminate in yellow. While this does not usually affect normal driving, it is important to check the cause of the light after driving. 3. Issues such as clogged fuel injectors or carbon buildup in the intake valves can also trigger the malfunction light. These problems are often related to the quality of fuel used or dust entering the engine during maintenance.
11
1
Share

How to set the speed limit for Volkswagen Lavida?

To set the speed limit for Volkswagen Lavida, follow these steps: 1. Press the button at the top of the wiper switch to toggle. When the data displays the warning speed limit, press the button on the inner side of the wiper to switch between display/adjustment modes. 2. When the driving speed exceeds the set speed, the set speed display will flash, accompanied by a warning sound. Additional information: The Lavida's in-car navigation system combines touch screen and knob control for operation, and includes MP3 playback capability, supporting USB, AUX, and SD card expansion slots. It is user-friendly and feature-rich, with the LCD screen adopting a foldable design.
20
4
Share

How to Reset the Haval Maintenance Light?

Haval maintenance light reset method is as follows: 1. Press and hold the reset button "A" while stepping on the brake. 2. Turn the ignition switch to "on" without starting the car. 3. The characters "INSP" will flash or the display will blink. 4. Continue holding the reset button "A" until "..." appears on the display. 5. Release the reset button "A" and take your foot off the brake. 6. Turn the ignition switch back to the "Off" position. Additional information: The Haval brand, primarily focused on SUV models, operates in parallel with the Great Wall brand, using independent logos, product development, production, service systems, etc., mainly engaged in SUV production and sales, including the H series, F series, and M series.
17
1
Share

What are the differences between the Trumpchi M6 and the Buick GL6?

The differences between the Trumpchi M6 and the Buick GL6 are as follows: 1. Price: The official price of the top-end Trumpchi M6 is cheaper than that of the top-end Buick GL6. 2. Overall body: The body of the top-end Trumpchi M6 is longer than that of the top-end Buick GL6, and the wheelbase of the top-end Trumpchi M6 is also longer than that of the top-end Buick GL6. 3. Overall configuration: The top-end Buick GL6 and the top-end Trumpchi M6 each have their own strengths and weaknesses, and they are evenly matched. 4. Power output: The top-end Trumpchi M6 is more powerful than the top-end Buick GL6.
17
5
Share

How to Set Up Automatic Unlock When the Murano Stalls?

The method to set up automatic unlock when the Murano stalls is as follows: 1. Unlock method: With the power on, after getting into the car without stepping on the brake, press the start button twice, then hold down the unlock button until the hazard lights flash, indicating the setup is complete. 2. Lock method: After getting into the car without stepping on the brake, press the start button twice, then hold down the lock button until the hazard lights flash, indicating the setup is complete. Below is some information about the Murano: 1. Exterior: The 2021 Murano series adds an Aurora Blue color, enhancing its fashion and premium feel. 2. Smart convenience features: It includes a dashcam and auto-folding mirrors, along with the newly upgraded Nissan Connect intelligent mobility system.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.