Why do the brake lights stay on after the car is turned off?

1 Answers
LouisLee
07/25/25 1:23am
If the brake lights remain illuminated after the car is completely turned off, it could be due to a malfunctioning brake switch, and replacing it should resolve the issue. Here is some relevant information: 1. Brake Lights: Brake lights are a crucial component for alerting vehicles behind. Drivers of following vehicles rely on changes in the brake lights of the car ahead to decide whether to accelerate or decelerate, ensuring driving safety. If the brake lights of the leading car malfunction—either not lighting up or staying on constantly—it can confuse the following driver and pose significant safety risks. Therefore, brake light issues should be addressed promptly. 2. Precautions: If you accidentally bump the turn signal lever after turning off the car, you might unintentionally activate this function. Aside from these scenarios, it could also be due to a fault in the car's electrical system. It is recommended that the owner take the car to a professional repair shop or a 4S store for inspection.
Was this review help?
1
4
Share
More Forum Discussions

How to Drive a Manual Transmission Car Downhill?

Precautions for driving a manual transmission car downhill are as follows: 1. Do not coast in neutral. When driving a manual transmission car down a steep slope, never coast in neutral. Novice drivers should learn to use engine braking. The specific method is to shift to a lower gear and use the brakes to control the speed. Remember not to press the brake pedal for a long time, as overheating the brakes can lead to brake failure. Always use intermittent braking. 2. Do not press the clutch pedal unnecessarily. The clutch is a device that separates and connects the engine and transmission. Its main function is to gradually or immediately cut off the power transmission between the engine and transmission. When the clutch pedal is pressed, the engine's drive mechanism is disconnected from the wheels. If you press the clutch pedal all the way down while going downhill, the car will coast in neutral. 3. Do not turn the steering wheel sharply. Avoid turning the steering wheel abruptly to prevent rollover due to high inertia, speed, or improper steering.
3
1
Share

Can People with Color Weakness Get a Driver's License?

People with color weakness can obtain a driver's license as long as they are not red-green colorblind. Generally, it depends on the medical examination report before taking the driver's license test. During the ophthalmology examination, you only need to look at one or two pictures, and hospitals are usually not very strict. As long as the medical examination shows no issues, there should be no problem. Of course, if someone is truly red-green colorblind, it is recommended not to drive. However, if it's just color blindness or color weakness for other colors, it doesn't matter. Below is an introduction to the C1 driver's license: 1. The C1 driver's license is a commonly used license: The C1 driver's license is the most commonly used and most common driver's license in China. 2. Vehicles that cannot be driven with a C1 license: The C1 driver's license does not permit driving city buses, medium or large passenger vehicles, large trucks, or two-wheeled or three-wheeled motorcycles. 3. Vehicles that can be driven with a C1 license: The C1 license allows driving C2, C3, and C4 models.
4
5
Share

What is the gw4g15f engine?

gw4g15f is a turbocharged engine. The following are relevant details about turbocharged engines: 1. Components: The turbocharging device mainly consists of a turbine chamber and a supercharger. First, the intake port of the turbine chamber is connected to the engine's exhaust manifold, while the exhaust port is connected to the exhaust pipe. Then, the intake port of the supercharger is connected to the air filter pipe, and the exhaust port is connected to the intake manifold. Finally, the turbine and impeller are installed in the turbine chamber and supercharger respectively, and the two are connected by the same shaft; 2. Main function: It increases the engine's air intake through the turbocharger, thereby enhancing the engine's output power and torque. After installing a turbocharger, an engine's maximum power can increase by 40% or more, meaning it can generate greater power after turbocharging; 3. Advantages: It can significantly improve the engine's power and torque without increasing the engine displacement. Turbocharged engines are not only more fuel-efficient but also reduce emissions of carbon monoxide, CH hydrocarbons, and PM particulates.
18
3
Share

Which car brand is SKODA?

SKODA is Škoda, one of the classic brands under Volkswagen Group in Germany, and one of the four oldest automobile manufacturers in the world. The brand was established in 1895. Here is some extended information about Škoda: 1. Initially equipped with a 1.1-liter displacement engine, it could reach a top speed of 110 km/h with a fuel consumption of only 7.7 liters per 100 km. Later, the Octavia Super model, powered by a 1.2-liter displacement engine, gained widespread acclaim in both domestic and international markets due to its excellent reputation, leading to a rapid increase in demand. 2. Škoda cars have successfully entered markets in Europe, Asia, the Middle East, South America, and Africa, favored by a broad consumer base for their high cost-performance ratio, durability, high safety standards, excellent handling, and comfort.
2
2
Share

How often are motorcycles inspected now?

According to Article 16 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: Motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration: Motorcycles within 4 years shall be inspected once every 2 years; those exceeding 4 years shall be inspected once every year. The following are the contents of motor vehicle annual inspections: 1. Document inspection: Check whether there is a vehicle user manual, certificate of conformity (inspection certificate for imported vehicles), and whether the factory inspection marks on the vehicle body are complete. 2. Measurement of internal and external dimensions of the motor vehicle: Measure the internal and external dimensions, wheelbase, and axle base of the motor vehicle. The specific measurement items include vehicle length, width, height, height and area of the cargo compartment, wheelbase, and axle base. 3. Filling out the modification registration form: Conduct inspections item by item according to technical inspection standards. After passing, fill out the 'Initial Inspection Modification Registration Form for Motor Vehicles' and record the unladen weight, load capacity, number of passengers, and number of people in the cab according to the manufacturer's specifications.
1
1
Share

What is the reason for the abnormal noise when pressing the rear shock absorber of a car?

Abnormal noise from the rear shock absorber of a car occurs when the shock absorber is damaged, causing issues in the coordination between its components. Below is relevant information about shock absorbers: 1. Importance: The performance of the shock absorber directly affects the smoothness of the car's ride and the lifespan of other mechanical parts. If there is abnormal noise, it may be due to malfunction after oil or air leakage, and it is recommended to replace the shock absorber to keep it in good working condition. 2. Maintenance method: After driving the car on poor road conditions for 10km, stop and touch the shock absorber housing by hand. If it is not hot enough, it indicates that there is no resistance inside the shock absorber, meaning it is not working. You can add an appropriate amount of lubricating oil and test again. If the housing becomes hot, it means the shock absorber is low on oil inside and should be refilled. Otherwise, it may lead to shock absorber failure.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.