Why Do Some Sedans Have Yellow License Plates?

1 Answers
MacAllie
07/30/25 7:57am
The reasons why some sedans have yellow license plates include exceeding length limits, meeting weight requirements for yellow plates, or being classified as special vehicles. The specific reasons are as follows: Exceeding Length Limits: If the vehicle's body length exceeds 6 meters, it requires a yellow license plate. A sedan with a yellow plate indicates that its body length is too long to meet the blue plate standards for sedans, thus necessitating a yellow plate. Meeting Weight Requirements for Yellow Plates: Vehicles with a total mass of 4.5 tons (inclusive) or more, or those designed to carry 20 passengers (inclusive) or more, must display yellow license plates. Special Vehicles: Sedans used by driving schools, taxis, and other commercial vehicles are required to have yellow license plates. Additionally, yellow-plated vehicles need an operating permit and must undergo quarterly inspections. Furthermore, yellow-plated vehicles require a special permit to drive in urban areas.
Was this review help?
3
2
Share
More Forum Discussions

Consequences of Using 92 Octane Gasoline in a Golf?

Using 92 octane gasoline in a Golf may lead to engine shaking, lack of power, and the illumination of the emission light. Below is an introduction regarding the suitable gasoline types for the Golf: 1. Gasoline Usage Recommendation: It is advised to use 95 octane or higher fuel. The appropriate fuel grade for your car primarily depends on its compression ratio. For turbocharged engines, it is generally better to use higher-grade fuel. Different gasoline grades are formulated to meet the requirements of engines with varying compression ratios. Engines with a compression ratio greater than 9:1 should use 90 octane or higher, those above 9.5:1 should use 92 octane or higher, and those exceeding 10:1 should ideally use 95 octane or higher. Many high-compression ratio vehicles have fuel tank labels recommending 92 octane or higher. 2. Disadvantages of Using Lower Octane Fuel: Although lower octane fuel can be used, it is only the minimum standard and barely acceptable. Any slight deviation in fuel quality will immediately reveal issues, causing the engine to shake, lose power, and trigger the emission light. Therefore, when your car is labeled for 92 octane or higher, although higher octane does not necessarily mean better quality than lower octane, it is recommended to use the higher octane to ensure stable engine operation and optimal combustion, reduce carbon deposits and collisions between moving parts, and protect the oxygen sensor. In high-compression ratio engines, using higher octane fuel during steady driving can significantly improve fuel efficiency and extend driving range. No matter how advanced the car is, it cannot change the engine's compression ratio or cylinder stroke. Lower octane fuel can be used in high-compression ratio engines but is not optimal. To prevent knocking, some loss in power and performance is inevitable.
9
1
Share

How often should the transmission fluid of Hyundai Elantra be changed?

Modern Elantra transmission fluid should be changed every 2 years or 60,000 kilometers. The replacement cycle of transmission fluid is calculated in the same way as the car maintenance cycle, mainly based on the mileage and usage time of the car, whichever comes first. Here is some information about transmission fluid: 1. Any type of car needs to change the transmission fluid. After driving a certain mileage, the transmission fluid will deteriorate, the quality of the transmission fluid will decrease, and the work efficiency will also be reduced. 2. The transmission used in cars is divided into automatic transmission and manual transmission. The replacement cycles of these two types of transmission fluid are different, and the specific replacement cycle should also be determined according to the use of the car. 3. Transmission fluid can also be said to be a cleaning product for the transmission system, and it can also protect the transmission. The quality of the transmission fluid directly affects the efficiency of the transmission. Regular replacement of transmission fluid is mainly to better protect the transmission.
18
0
Share

What are the steps for adding refrigerant to a car?

Since the chlorine atoms in Freon can damage the ozone layer in the atmosphere, Freon is no longer used as a refrigerant in either household air conditioners or automotive air conditioners. For car air conditioners, R-134a refrigerant is currently the standard. The specific steps for adding refrigerant are as follows: 1. Preparation: Before adding refrigerant, prepare the necessary tools and materials, including a car refrigerant recovery and charging machine and refrigerant (most car air conditioners use R-134a refrigerant; different refrigerants must not be mixed). 2. Connect the hoses: Connect the hoses of the car refrigerant recovery and charging machine to the high and low-pressure pipes of the car air conditioner (red connects to the high-pressure pipe, blue connects to the low-pressure pipe). 3. Evacuation: Once the hoses are properly connected and the self-check of the refrigerant recovery and charging machine is complete, begin the evacuation process for the car air conditioner. 4. Add refrigerant: Only after the evacuation is complete can you start adding refrigerant. Set the charging capacity, time, and type on the refrigerant recovery and charging machine according to the maximum refrigerant capacity labeled on the vehicle's air conditioner. After confirmation, the machine will automatically begin adding the refrigerant.
13
3
Share

What is the best speed for a new car on the highway?

For the first 500 kilometers, the new car must not be driven with heavy loads, and the speed should not exceed 80 km/h. Within 1000 kilometers, it can carry slightly heavier loads, but the driving speed should not exceed 100 km/h. Within 2000 kilometers, the driving speed should not exceed 120 km/h. More detailed explanations are as follows: 1. Running-in period: Before the car is assembled, each moving part is processed separately, and there are geometric deviations in the processing of parts. Therefore, after assembly, some moving parts may have direct local contact, making it difficult for lubricating oil to enter the friction surface, resulting in early wear. The running-in period is the time during which these directly contacting parts are worn down, and this period is called the running-in period. The running-in mileage for a new car is generally 1000 to 3000 kilometers. 2. Generally, it is best to wait until after the first maintenance because the oil used before the first maintenance is the first batch, which contains a large amount of debris. Using this oil for high-speed driving will greatly increase engine wear and may even cause abnormal wear. As a result, the vehicle after the running-in period may not be in the best condition.
4
1
Share

What are the symptoms of a dirty throttle body in a car?

Car may experience unstable idle, difficulty starting, and reduced power. Below is a partial introduction about the car throttle body: 1. Introduction: The throttle body is a controllable valve that regulates air intake into the engine. After entering the intake manifold, the air mixes with gasoline to form a combustible mixture, which then burns to generate power. 2. Consequences: An excessively dirty throttle body can lead to insufficient engine power, while over-cleaning may cause premature failure of the throttle body. 3. Throttle body cleaning methods: There are two types—removal cleaning and non-removal cleaning. Typically, 4S shops perform removal cleaning, which involves dismantling the entire throttle body assembly, thoroughly cleaning it with specialized cleaning agents, and then reassembling it.
19
3
Share

What is the tire pressure for the Cadillac XT4?

The tire pressure for the Cadillac XT4 is between 2.3 and 2.5 bar. The hazards of excessive tire pressure include: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Steering wheel vibration and deviation, reducing driving comfort; 3. Accelerated wear on the central tread pattern, shortening tire lifespan; 4. Increased body vibration, indirectly affecting the lifespan of other components. Taking the 2020 Cadillac XT4 as an example, it is a compact SUV with dimensions of 4600mm in length, 1881mm in width, 1627mm in height, and a wheelbase of 2779mm.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.