Why Do Some Cars Not Have Fog Lights?

1 Answers
ChristianDella
07/30/25 7:09am
Vehicle headlights with low beam function provide far greater brightness than front fog lights. Here is an introduction about fog lights: 1. Introduction: Fog lights generally refer to automotive fog lights. Installed at the front and rear of the vehicle, they are used for road illumination and safety warnings during rainy or foggy weather conditions, improving visibility for both the driver and surrounding traffic participants. 2. Classification: Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically bright yellow, while rear fog lights are red. The symbols for rear fog lights differ slightly from front fog lights - the front fog light symbol has downward light lines, whereas the rear fog light symbol has parallel lines, usually located on the dashboard inside the car. Due to their high brightness and strong penetration, fog lights do not cause diffuse reflection from fog, making them effective in preventing accidents when used correctly. In foggy weather, front and rear fog lights are usually used together.
Was this review help?
2
4
Share
More Forum Discussions

What is the fuel consumption of the old Volkswagen Santana 1.8?

The Santana currently has 7 models on sale. Among them, the Santana 2021 1.5L Manual Comfort Edition, Automatic Fashion Edition, Manual Fashion Edition, Automatic Comfort Edition, and the Santana 2019 Hatchback 1.5L Manual Fashion Edition National VI, totaling 5 models, are equipped with the EA211-DLF engine, with an NEDC fuel consumption of 5.6L per 100km. The Santana 2019 Hatchback 1.5L Automatic Fashion Edition National VI and Automatic Comfort Edition, two models, are equipped with the EA211-DLF engine, with an NEDC fuel consumption of 5.5L per 100km. The fuel tanks of all 7 Santana models are the same. The distance that can be covered with a full tank of fuel is as follows: Models equipped with the 1.5L 112 horsepower engine have a fuel tank capacity of 52.8L. The distance that can be covered with a full tank is 52.8/5.6*100=942km; 52.8/5.5*100=960km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, will increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
2
5
Share

What does Raptor aux1234 mean?

The aux1234 on the Raptor refers to the reserved auxiliary device switches, which are self-modified light control buttons. The front part of the vehicle has left modification space for enthusiasts who enjoy modifications. Various lighting fixtures can be installed in the bumper area, and the switches can be adjusted using AUX1-AUX4. AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio from electronic products can be connected to the car audio through the headphone jack and AUX interface, allowing the audio to be played on the car audio broadcasting facilities. The USB interface can be used to insert a USB drive for audio playback. When in use, connect one end to the AUX interface and the other end to devices such as mobile phones, MP3 players, or MP4 players. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will stop (the interface is generally a 3.5mm standard headphone jack). Aux is the abbreviation for Auxiliary. It is an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. When there are special applications, such as additional sound output or input, these terminals can be used. These backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, or connecting with a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because they are used in different configuration environments. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are usually impossible in user mode, such as initialization, restoring default configurations, or correcting abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup for hardware products can be achieved. Note: When using the AUX interface, make sure to buy the correct connecting cable and avoid plugging the audio cable into the wrong port. It is best to follow the steps in the product's user manual when using the AUX interface.
1
3
Share

Why is Zhongran cheaper than Sinopec?

For automotive gasoline, prices vary among different refineries, which is not a significant issue. Consumers can make choices based on their usage needs. The differences between Zhongran and Sinopec are as follows: 1. Enterprise nature: Sinopec and PetroChina are under the State-owned Assets Supervision and Administration Commission, while Zhongran was initiated by the Cross-Strait Economic and Technological Cooperation Center of the Taiwan Affairs Office without majority control, making it essentially a private enterprise. 2. Zhongran lacks oil extraction license: Zhongran primarily operates pipelines, acting as a middleman without an oil extraction license, only possessing a natural gas extraction license.
2
2
Share

What does the total mass of 1950kg mean?

Total mass of 1950kg refers to the weight of the vehicle when fully equipped and loaded with passengers and cargo as specified. Overloading can cause the following damages to the vehicle: 1. Shorten the lifespan of leaf springs and reduce the vehicle's passing capability; 2. Accelerate tire wear and deformation; 3. Reduce braking performance and increase the non-safety zone distance. The net weight of a car refers to the weight of the vehicle itself, which is the total weight of all its components; the curb weight refers to the weight of the car when fully equipped according to factory specifications (including spare tires, tools, etc.) and with all fluids such as antifreeze and brake fluid filled to the required levels.
16
1
Share

What does 'service' displayed on a car mean?

When 'service' appears on a car, it means 'service', indicating that it's time for the vehicle owner to perform maintenance. Below is a related introduction to car maintenance: 1. Definition of maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. Different manufacturers and different models have varying maintenance items and cycles, so it's necessary to refer to the accompanying maintenance schedule for your beloved car's upkeep. 2. The role of maintenance: Regular car maintenance ensures the vehicle's excellent performance state; improves driving safety; reduces engine noise; and extends the vehicle's service life.
19
5
Share

What are the hidden features of the eighth-generation Accord?

The hidden features of the eighth-generation Accord include: 1. Automatic folding of side mirrors when locking the car, which prevents scratches from external vehicles or pedestrians, making it very convenient; 2. Automatic door locking when the speed exceeds 20km/h, avoiding safety hazards caused by passengers opening the doors during driving; 3. Automatic downward tilting of side mirrors when reversing, helping the driver see the position of the rear wheels for better parking. The eighth-generation Accord is a mid-size car with body dimensions of: length 4945mm, width 1845mm, height 1480mm, wheelbase of 2800mm, fuel tank capacity of 70 liters, and curb weight of 1430kg.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.