Why Do So Many People Buy the Elegant Gold Lavida?

1 Answers
SanDante
07/30/25 2:40am
Because the Volkswagen Lavida has stable engine performance, good durability, spacious interior, and excellent sales and reputation. Introduction to Lavida: The first independently developed A-class car by Shanghai Volkswagen, the LAVIDA Lavida, became the focus of media and consumers at the 2008 Beijing Auto Show. Design of Lavida: As a model specifically tailored for Chinese consumers, Lavida maintains the excellent quality of German design while incorporating many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. Meaning of Lavida: It symbolizes life, living, and hope, representing the dynamic vitality of life and the joy of living, advocating the latent potential of life that bursts from within.
Was this review help?
13
3
Share
More Forum Discussions

Does C1 include C2, C3, and C4?

C1 driver's license covers the following vehicle categories (including all vehicle types under C2, C3, and C4 licenses): small and micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special-purpose vehicles. Small passenger vehicles accommodate 9 or fewer passengers. C1 Driver's License: The C1 driver's license is one of the classifications of motor vehicle driving licenses. The permitted driving scope of a C1 license includes small and micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special-purpose vehicles. Small passenger vehicles accommodate 9 or fewer passengers. Can a C1 License Holder Drive a Motorcycle: A C1 license does not permit the holder to drive motorcycles. To drive a motorcycle, the driver must hold a D, E, or F license. A C1 license holder can drive all vehicle types under C2, C3, and C4 licenses.
10
2
Share

Is Jetour Produced by Chery?

Jetour is under the umbrella of Chery Holding, but it is a completely new product line. Additional information is as follows: Jetour's Production Location: Jetour is produced at Chery's Kaifeng Intelligent Manufacturing Base in Henan, sharing the factory with Karry commercial vehicles. Strictly speaking, Jetour belongs to Chery Commercial Vehicles, neither under Chery Automobile nor under the Karry brand of commercial vehicles. Similarly, it is not part of Chery's so-called multi-brand strategy but rather a new product line. Karry Automobile: Karry Automobile was established in 2009 as one of Chery's strategic brands. From its inception, Karry Automobile has relied on Chery's international R&D and vehicle manufacturing system, starting with 7-seaters, focusing on 7-seaters, and excelling in 7-seaters. It quickly established an efficient R&D, production, sales, and after-sales service system through scientific management. The well-developed R&D, production, sales, and after-sales service system of the Karry brand laid a solid foundation for Jetour, which is also why Jetour was able to quickly establish itself in the market.
14
2
Share

What does the Subject 2 of the driving test include?

Subject 2 of the driving test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. Below are the preparations for Subject 2 before starting the vehicle: There is no time limit for starting after getting into the car. First, close the car door and check if the door light is off—this is crucial. Press the clutch all the way down with your left foot and hold it steady. Use your right hand to grip the steering wheel, and adjust the seat with your left hand until your left foot can bend slightly with some force. Also, check the seat's stability by moving it back and forth. Adjust the backrest to a 90-degree angle to your body and test its stability by moving it back and forth. Then, place your hand on your head to measure if the height is the same as during practice. If it's too low, you must use a seat cushion to adjust it properly. Finally, adjust the left and right rearview mirrors to the appropriate positions.
7
1
Share

What to Do with China 5 When China 6 Comes Out?

China 5 and China 6 refer to certain policy standards set by the country for vehicle exhaust emissions. Once the new emission standard is introduced, the old standard is phased out. Differences Between China 5 and China 6: However, there is a significant difference. After the new emission standard is introduced, the old standard is discontinued, and vehicle models that do not meet the new standard can only be disposed of. It is reported that the China 6 standard is an upgrade of the China 5 standard and will become one of the strictest standards globally. Comparison Between China 5 and China 6: Compared to the China 5 standard, China 6 will strictly control pollutant emission limits. Under the exclusion of operating conditions and test influences, carbon monoxide emissions from gasoline vehicles will be reduced by 50%, total hydrocarbon and non-methane hydrocarbon emission limits will drop by 50%, and nitrogen oxide emission limits will be tightened by 42%. The China 6 standard is based on international standards and is completely different from the previous China 3, China 4, and China 5 standards.
2
5
Share

Is the paint spraying process noisy?

Paint spraying itself is not very noisy. The primary noise comes from the air compressor (also known as the air pump), which produces sound similar to a small diesel generator. Paint spraying method: First is the paint mixing process, where color matching must be carefully checked. Protective measures are crucial - any areas not being painted must be covered with newspaper or other masking materials. During spraying, attention should be paid to the spray gun pressure and working environment. Finally comes the baking time. Complete painting sequence: The standard painting procedure typically involves: 1) Metalwork (hammering and leveling the metal body), 2) Sanding down the original paint and base layers on the target area to create a surface two paint layers lower than standard, 3) Applying filler putty (spreading body filler into depressions and leveling to create a primer base), 4) Paint mixing and spraying, 5) Baking in the paint booth, followed by 6) Air drying for about ten hours until completion.
14
1
Share

Where to Get a Physical Examination for a Motorcycle License?

Physical examinations must be conducted at locations designated by the Vehicle Management Office or at county or city-level hospitals specified by the office. Only after passing the physical examination can you schedule the test. Vision: For those with monocular vision impairment, the naked or corrected vision of the right eye must be 5.0 or above on the logarithmic visual acuity chart, with a horizontal field of vision reaching 150 degrees. Height: Height must be at least 150 centimeters. Color Vision: No red-green color blindness. Hearing: Ability to distinguish the direction of sound sources with both ears at a distance of 50 centimeters from a tuning fork. Limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement function of limbs and fingers; both lower limbs must be intact with normal movement function, and the length difference between the lower limbs should not exceed 5 centimeters. For applying for an automatic transmission vehicle, the right limb must be intact; there should be no movement dysfunction in the limbs.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.