Why Do People Go to Tianjin to Buy Cars?

2 Answers
Annabeth
07/29/25 10:59pm
About the reasons why people go to Tianjin to buy cars are introduced as follows: 1. Tianjin Port has a very large scale. Tianjin Port is a platform for parallel imported cars in China, with an enormous scale domestically. At the same time, Tianjin Port offers a complete range of car models, with all kinds of models available, and the prices are very economical, which has won the favor of major consumers. 2. There is a wide variety of car models. 60% of the national parallel imported car transactions are completed in Tianjin, giving rise to a vast range of car models, including American-spec cars imported from the U.S., European-spec cars imported from Europe, and even Middle Eastern models. Basically, cars that cannot be found in 4S stores can be found in Tianjin and purchased at a suitable price.
Was this review help?
12
4
Share
Zachary
08/16/25 12:47am
To be honest, I went to Tianjin to buy a car mainly because the prices were too good to pass up. Tianjin is a hub for imported cars, especially parallel imports that come directly from overseas, cutting out the middleman markups. Last year, I bought a Mercedes SUV there for over 50,000 yuan cheaper than in Beijing—it was practically a steal! The city hosts car exhibitions year-round with an incredible variety of brands, from Japanese to German, and the salespeople are easy to talk to, open to bargaining, and offer test drives on multiple models. Plus, with convenient transportation like high-speed rail to Beijing, it's easy for out-of-towners to pick up their cars. The purchase process even includes dedicated agents handling insurance and registration, saving time and effort. If you want to save money while driving a premium car, Tianjin is definitely the top destination.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What's the reason when a car suddenly stops moving?

The reasons why a car suddenly stops moving are as follows: 1. Clutch: When you press the accelerator, the engine speed increases, but the car doesn't move, indicating a problem with the clutch. 2. Fuel supply system: When you press the accelerator, the engine speed does not increase, indicating that there is no fuel injection, which could be due to an issue with the fuel supply system or the throttle cable. 3. Intake system: When experiencing weak acceleration, check if the intake system is intact. If it is intact, consider whether the intake system needs cleaning. Remove the air filter and blow out the dust; if it's difficult to clean, replace it. Check if the throttle body is clean, and further inspect the intake valve and intake manifold. Clean them if necessary. After inspecting and cleaning the intake system, if the acceleration is still weak, it can be concluded that the issue is not related to the intake system. Idle shaking can be resolved by cleaning the intake system.
14
4
Share

What are the advantages and disadvantages of the auto start-stop function in cars?

The advantages and disadvantages of the auto start-stop function in cars are as follows: 1. Advantages and reasons: The principle of the auto start-stop system is to add an electric motor to the common gasoline engine. When the car is stopped and the engine is idling, the engine will completely shut off. When it is necessary to start, the electric motor quickly starts the engine by the driver stepping on the accelerator pedal, clutch, or turning the steering wheel, achieving seamless transition and thereby reducing fuel consumption during idling. 2. Disadvantages and reasons: (1) Frequent engine starts and stops can cause damage to related components such as the starter and battery. Although vehicles equipped with auto start-stop systems use enhanced starters and batteries, in actual use, their failure rates are higher than those of ordinary vehicles without auto start-stop systems. (2) The maintenance costs of enhanced starters and batteries are higher than those of ordinary starters and batteries. Additionally, due to the frequent repeated starts and stops of the engine, there is a higher demand for oil quality, further increasing maintenance costs.
8
4
Share

What kind of engine oil should be used for Xingyue 2.0T?

Xingyue 2.0T requires Shell VCC RBS0-2AE 0W-20 specification engine oil. Below is the relevant introduction about the latest Xingyue 2.0T: Body dimensions: The latest Xingyue 2.0T has a body length, width, and height of 4605mm, 1878mm, and 1643mm respectively, with a wheelbase of 2700mm. Chassis: The latest Xingyue 2.0T features front-wheel drive, with a MacPherson independent front suspension and a multi-link independent rear suspension, adopting a unibody structure. Powertrain: The latest Xingyue is equipped with a 2.0L turbocharged 4-cylinder JLH-4G20TDB engine, delivering a maximum horsepower of 238Ps and a maximum power of 175KW, paired with an 8-speed automatic transmission.
8
4
Share

What is the fuel injection timing angle for the 6135 diesel engine?

6135 diesel engine fuel injection timing angle is 28-31 degrees at 1500 rpm without an advance device, and 12-20 degrees with an advance device. Below is more information about fuel injection timing angle: 1. Fuel injection timing angle refers to the crankshaft angle corresponding to the moment when the fuel injection pump starts supplying fuel to the cylinder and the piston top is at a certain position before top dead center. 2. If the fuel injection timing angle is too small, causing delayed fuel injection, it will result in incomplete combustion, difficulty starting, insufficient power, black smoke from the exhaust pipe, and other symptoms. 3. If the fuel injection timing angle is too large, meaning the fuel injection starts too early, it can cause difficulty starting or reverse rotation, rough combustion noise, unstable operation, reduced engine power, easy burning of cylinder gaskets, and faster cooling water consumption.
1
1
Share

How many turbos does the Nissan GTR's engine have?

The Nissan GTR's engine has 2 turbos. This car is equipped with a 3.8-liter twin-turbocharged V6 engine with the model code VR38DETT. The engine delivers a maximum horsepower of 486 hp and a maximum torque of 588 Nm. The maximum power output is achieved at 6,400 rpm, while the maximum torque is available between 3,200 and 5,200 rpm. The engine is paired with a 6-speed dual-clutch transmission. The GTR's dimensions are 4,650 mm in length, 1,895 mm in width, and 1,370 mm in height, with a wheelbase of 2,780 mm. In terms of suspension, the front suspension uses a double-wishbone independent setup, while the rear suspension employs a multi-link independent configuration.
5
1
Share

What kind of engine oil is suitable for Chery Flagcloud 1?

Chery Flagcloud 1 can use 5W-40 semi-synthetic engine oil. The viscosity of engine oil is not the higher the better, the most important thing is whether it is suitable. The viscosity of engine oil should be as small as possible: On the premise of ensuring reliable lubrication of the engine, the viscosity of engine oil should be as small as possible. Except for use in the southern summer, engine oil with high viscosity is only suitable for some severely worn engines. Blindly choosing high-viscosity engine oil will increase the resistance during engine operation, thereby increasing fuel consumption. Multi-grade oil should be used as much as possible: Multi-grade oil has good viscosity-temperature performance, can be used for a long time in the engine, saves fuel, and is suitable for all seasons, making it easy to manage. When using multi-grade oil, the oil color tends to turn black, and the oil pressure is also lower than that of ordinary engine oil. These are normal phenomena and do not affect the use.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.