Why do I keep bumping into things while driving?

2 Answers
Catherine
07/24/25 9:01am
Frequent bumps while driving are usually due to poor spatial awareness and require more practice. Here are some relevant tips for safe driving: 1. Always wear your seatbelt: Buckling up is crucial for safety. However, some drivers avoid wearing seatbelts, claiming they restrict movement or cause discomfort. Such behavior should be firmly discouraged. 2. Slow down when necessary: Reduce speed when passing through intersections between main and auxiliary roads. 3. Avoid making U-turns on highways: Never attempt to turn around on highways. In case of vehicle malfunction, immediately activate hazard warning lights and move the vehicle to a safe location. If the vehicle cannot be moved, keep hazard lights on and set up warning signs in the direction of approaching traffic to increase visibility. Call for emergency assistance if needed.
Was this review help?
20
0
Share
AustinLee
08/11/25 4:30am
When I first got my driver's license, I kept bumping and scraping here and there while driving, which was really annoying. The main issue was my poor hand-foot coordination—I'd get all confused when turning the steering wheel while reversing and often overlooked blind spots, like those dead angles in the rearview mirror where I couldn't see the corner before hitting it. Later, I found an empty lot to practice every day, gradually got used to the car's dimensions, and learned to park by feel. I also made it a habit to walk around the car before parking. After months of effort, things finally improved. Beginners need to be patient—don't drive too fast right away. Mastering the basics is crucial; otherwise, frequent minor accidents will not only damage the car but also increase insurance premiums.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

What are the effects of a faulty car thermostat?

Damage caused by a faulty car thermostat: Increased engine wear and shortened engine lifespan. More information about the thermostat is as follows: 1. The thermostat automatically adjusts the amount of water entering the radiator based on the coolant temperature, changing the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range. 2. The thermostat must maintain good technical condition; otherwise, it will severely affect the normal operation of the engine. For example, if the main valve of the thermostat opens too late, it will cause the engine to overheat; if the main valve opens too early, it will prolong the engine warm-up time, resulting in the engine temperature being too low.
4
3
Share

What Are the Hazards of Overinflated Tires?

The hazards of overinflated tires: 1. The friction and adhesion of the tires will decrease, affecting braking performance; 2. It can cause steering wheel vibration and pulling, reducing driving comfort; 3. It accelerates localized wear on the central tread pattern of the tires, shortening their lifespan; 4. Increased body vibration can indirectly affect the lifespan of other components; 5. It causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load on the car while driving; 6. It decreases the tire's resistance to punctures, making it easier for sharp objects like nails or glass on the road to penetrate the tire, leading to internal cracks and blowouts, resulting in a tire blowout.
12
3
Share

Will the Three-Way Catalyst Be Damaged if Washed with Oxalic Acid?

It will not cause any damage to the three-way catalyst. Below is more information about the three-way catalyst: Introduction: The three-way catalytic converter, installed in the vehicle's exhaust system, is the most important external purification device. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Features: The carrier component of the three-way catalytic converter is a porous ceramic material. The three-way catalytic converter boasts stable performance, reliable quality, and a long lifespan. Its products are widely applicable to models from Toyota, Honda, Buick, Audi, Volkswagen, Hyundai, Suzuki, Changhe, and more.
16
5
Share

What are the body dimensions of the Tourneo?

The body dimensions of the Tourneo are 4976mm in length, 2032mm in width, and 1990mm in height, with a wheelbase of 2933mm. The Tourneo adopts Ford's older family-style design, featuring a narrow front grille, an inverted trapezoidal grille at the bottom, and large headlights on both sides with built-in lenses. The new vehicle incorporates a sliding door design, and the rear styling is relatively moderate. The Tourneo is an MPV model, equipped with a 2.0-liter turbocharged engine across the entire lineup. This engine delivers 203 horsepower and a maximum torque of 300 Nm, with the maximum power achieved at 5500 rpm and the maximum torque at 3000 rpm.
8
3
Share

How to Set the Horn Sound When Locking the Toyota RAV4?

Toyota RAV4 lock horn sound setting method: Press and hold both the unlock and lock buttons on the remote control for more than three seconds to switch modes. The Toyota RAV4 is a compact SUV equipped with a 2.0L inline four-cylinder naturally aspirated engine, delivering a maximum horsepower of 171ps and a maximum torque of 209nm. The vehicle measures 4600mm in length, 1855mm in width, and 1680mm in height, with a wheelbase of 2690mm. It features a 5-door, 5-seat SUV body type, a CVT continuously variable transmission, a top speed of 180km/h, and a front-wheel-drive system.
18
4
Share

How to Determine if Gasoline Has Entered the Engine Oil?

Methods to determine if gasoline has entered the engine oil include: 1. Low oil pressure; 2. Thinning of the oil; 3. A gasoline smell when pulling out the oil dipstick; 4. An increase in oil level. Engine oil not only lubricates but also cleans, seals, prevents rust, and dissipates heat in the engine. During engine operation, the oil forms a protective film on the surfaces of various components, preventing direct contact and friction between them. If engine components directly contact and rub against each other, it can accelerate engine wear and lead to overheating. Prolonged operation of the engine in an overheated state can result in cylinder scuffing.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.