Why do French cars have high RPM?

1 Answers
OLucas
07/30/25 9:52am
Because French cars not only focus on romantic designs but also highlight their fast acceleration as a key selling point. Below is relevant information about French cars: 1. Advantages: The biggest advantage of French cars is their excellent quality. They feature attractive appearances, solid chassis, and balanced configurations. French car manufacturing employs laser welding, electroplated primers, and rust-proof welding seam adhesives, resulting in rigid, durable, and long-lasting car bodies. 2. Disadvantages: The technology updates too slowly. The cabin designs often feel quirky and impractical. The transmission can be somewhat laggy, and the comfort level is not ideal. However, the failure rate is relatively low.
Was this review help?
15
0
Share
More Forum Discussions

Where is the Auto Start-Stop Switch in the Elysion?

The auto start-stop switch in the Elysion is located on the lower left control panel, marked with an AOFF symbol. The Elysion is a mid-to-high-end MPV launched by Dongfeng Honda, with body dimensions of 4935mm in length, 1845mm in width, and 1805mm in height, and a wheelbase of 2900mm. In terms of power, the Elysion is equipped with 2.0L and 2.4L naturally aspirated engines. The Elysion 2.0L is a hybrid model with a maximum power output of 146 horsepower, and the electric motor has a maximum power output of 184 horsepower. For the transmission system, the Elysion hybrid model is paired with an ECVT continuously variable transmission, while the fuel-powered version is matched with a CVT continuously variable transmission.
4
4
Share

How to Remove the Wiper Blades on a Baojun 730?

Baojun 730's wiper blade removal method is as follows: 1. First, lift the wiper blade that needs to be replaced; 2. Press the wiper blade downward and pull out the U-shaped arm; 3. Then replace it with a new wiper blade. The Baojun 730 is an MPV with body dimensions of 4685mm in length, 1785mm in width, and 1745mm in height, and a wheelbase of 2750mm. The Baojun 730 lineup uses two engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5-liter turbocharged engine delivers a maximum power of 108 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5200 rpm and the maximum torque available between 2200 to 3400 rpm. This engine is paired with either a 6-speed manual transmission or a CVT transmission.
16
1
Share

Why is the car's exhaust pipe very black?

The reasons for a very black car exhaust pipe are: incomplete combustion of car fuel, prolonged idling warm-up time, poor air quality, use of low-quality gasoline, burning engine oil, and failure of the three-way catalytic converter. Although a blackened exhaust pipe is not a malfunction, long-term accumulation of carbon deposits can damage the engine, naturally leading to reduced power, increased noise, and consequently higher fuel consumption. Regular maintenance of the fuel system, intake, and exhaust systems is the best choice to reduce carbon deposits and lower exhaust emissions. The car exhaust pipe, also known as the car exhaust flexible hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler, providing flexible connection for the entire exhaust system, thereby serving to reduce vibration and noise, facilitate installation, and extend the life of the exhaust muffler system.
15
1
Share

What are the reasons for the car jerking and not getting enough fuel?

The reasons for the car jerking and not getting enough fuel are: 1. Fuel quality issues: If the fuel used does not meet the required standards and cannot meet the engine's operational needs, the output power will decrease; 2. Faults in the intake system: Slow response when accelerating may require checking the intake valve, intake pipes, and air filter for blockages or damage; 3. Power system malfunction: When inspecting the power transmission device, check whether the transmission is slipping or has gear engagement issues; 4. Sensor malfunction: This can cause a slow response when accelerating and requires professional repair; 5. Ignition issues: Problems with spark plugs or inaccurate ignition timing, it is recommended to visit a 4S shop for repairs; 6. Driving habits: Pressing the accelerator too quickly or too slowly can lead to a sluggish throttle response, so it's important to apply the right amount of pressure.
11
1
Share

Should the front and rear tire pressures be the same?

The front and rear tire pressures are not the same. Since the engine is located at the front, the front tires typically require higher pressure. However, the difference between front and rear tire pressures should not be excessively large. For specific standards, please refer to the vehicle's tire pressure guidelines. The relationship between tire pressure and vehicle off-road capability: A vehicle's off-road performance depends on many factors, with tires being a crucial element, including tread pattern, diameter, and pressure. For the same tire, the required pressure varies when driving on different road surfaces. Tire pressure refers to the air pressure inside the tire, essentially the 'blood pressure' of a car. The level of tire pressure plays a vital role in the vehicle's performance and power.
15
2
Share

Is the Three-Way Catalytic Cleaner Added to the Fuel Tank Effective?

The three-way catalytic cleaner added to the fuel tank is ineffective because cleaning the catalyst requires high temperatures to be effective. At room temperature, the three-way catalytic converter does not possess catalytic capability. Its catalyst must be heated to a certain temperature to gain oxidation or reduction abilities. Typically, the ignition temperature of the catalytic converter ranges between 250–350 degrees Celsius, and its normal operating temperature is between 400–800 degrees Celsius. Therefore, simply adding a three-way catalytic cleaner is ineffective. Methods for cleaning the three-way catalytic converter include intravenous bottle cleaning and disassembly cleaning. Intravenous Bottle Cleaning: This method involves using the intake vacuum suction to draw the cleaning agent into the combustion chamber. After burning, it creates a high-temperature oxidation environment inside the three-way catalytic converter. Through redox reactions, it converts sulfur, phosphorus compounds, and unburned gasoline residues on the catalytic converter into gases such as carbon dioxide and sulfur dioxide, which are then expelled through the exhaust pipe. This process aims to restore the activity of the precious metals on the three-way catalytic converter. Disassembly Cleaning: This method requires completely removing the three-way catalytic converter from the vehicle. The converter is then soaked in a cleaning agent for a period before being rinsed with water. This is the most effective method for cleaning the three-way catalytic converter.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.