Why do daytime running lights stay on after locking the car?

2 Answers
Declan
07/25/25 8:17am
Daytime running lights remain illuminated after turning off the engine due to delayed shut-off. Here are some key points about daytime running lights: 1. Driving safety: In low-light conditions such as cloudy or hazy weather, daytime running lights function like signal lights, making your vehicle more visible to pedestrians and other drivers, thereby reducing accident risks. 2. Reducing accident rates: Many modern vehicles are equipped with daytime running lights. Statistics show that these lights can reduce accident rates by 15%. There's no need to worry about daytime running lights consuming significant amounts of electricity or fuel.
Was this review help?
9
5
Share
DeNoah
08/10/25 6:53pm
I once encountered an issue with my car's daytime running lights staying on after locking the car, which gave me quite a scare thinking they were broken. The reason was that the "Follow Me Home" function in the vehicle settings was activated, designed to light your way after unlocking in the dark. Typically, these lights automatically turn off after 20-30 seconds post-locking. If they remain on abnormally long, say for several minutes without turning off, it might indicate a malfunctioning control module or a short circuit in the wiring. I would first check the owner's manual to locate the function switch, as most cars allow you to disable it in the lighting settings on the central control screen. If this issue arose after modifying the lights, incorrect wiring might be the culprit, requiring a reset. Remember to conduct regular checks to avoid battery drain leading to starting difficulties. If necessary, have it professionally fixed at a modest cost rather than delaying and risking battery damage.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What is the reason for the BMW X5 transfer case reporting a VTG fuel consumption fault?

The BMW X5 transfer case reporting a VTG fuel consumption fault is generally caused by wear and tear of the VTG internal clutch plates. Below is a detailed explanation: 1. Introduction: The so-called transfer case is a device that distributes the engine's power, which can output power to the rear axle or simultaneously to the front/rear axle. From this perspective, it can be seen that the transfer case is actually a component of four-wheel-drive vehicles. With the development of four-wheel-drive technology, transfer cases have continuously evolved, forming distinctly different styles to match various four-wheel-drive vehicles with different demands. 2. Classification: Traditional type: Part-time four-wheel-drive vehicles can operate as two-wheel-drive vehicles under normal conditions and switch to four-wheel-drive in off-road situations. The part-time four-wheel-drive transfer case is a purely mechanical device; Super Select type: This term is associated with Mitsubishi and has long been regarded as Mitsubishi's proprietary technology. From the transfer case's shift lever, it resembles a traditional part-time four-wheel-drive system, but the difference is that it is equipped with a central differential.
17
5
Share

Why does the Haval H6 have no network connection?

Haval H6 has no network connection because the car's onboard system has not been updated. Simply update it and then check if the network connection is restored. If there is still no connection, further troubleshooting is required. Additional information: 1. Origin of onboard networks: With the increasing complexity of electronic control systems and the growing demand for communication capabilities between electronic control units within the car, using point-to-point connections would result in more wiring harnesses inside the vehicle. This poses significant challenges in terms of reliability, safety, and weight during the design and manufacturing process. Therefore, to reduce wiring inside the car, achieve data sharing and fast exchange, and improve reliability, automotive electronic network systems with basic structures such as CAN, LAN, LIN, and MOST have been implemented on rapidly developing computer networks, known as onboard networks. 2. Characteristics of onboard networks: Improve overall vehicle control integration, reduce electrical wiring harnesses, enhance signal transmission accuracy, and facilitate maintenance. Suitable for short-distance communication with large data volumes or long-distance communication with small data volumes, with high real-time requirements.
4
4
Share

Can the Wuling Hongguang Mini be charged for just a short while?

If the car still has some battery left, it can be charged for just a short while, but a full charge takes a long time, approximately nine hours. This is because the Wuling Hongguang Mini can only be charged using slow charging and does not support fast charging. Important notes: 1. Do not charge after the battery is completely depleted: Avoid completely draining the battery before charging. It is not necessary to charge the battery to 100% capacity. 2. Preheat the vehicle: In extremely cold temperatures, do not charge the vehicle directly. Start the vehicle and let it preheat for about half an hour before charging. 3. Battery safety: The Wuling Hongguang Mini's power battery is equipped with robust technology, providing multiple layers of safety protection. It has an IP68 rating for dust and water resistance, ensuring reliable performance during winter range reduction and harsh weather conditions like rain and snow, thereby fully guaranteeing charging and driving safety.
14
4
Share

What Causes Abnormal Noise in Car Air Conditioning Compressors?

Abnormal noise in a car air conditioning compressor is caused by issues with the compressor's electromagnetic clutch. When the compressor operates under high load for extended periods, damage to the bearings within the electromagnetic clutch can result in abnormal noises. Below is relevant information about car air conditioning systems: 1. Definition: The car air conditioning system, abbreviated as car AC, is designed to regulate and control the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to optimal levels. It provides a comfortable environment for passengers, reducing travel fatigue, and creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving. 2. Main Components: Generally includes refrigeration units, heating units, and ventilation systems. This integrated system makes efficient use of the limited space inside the vehicle, featuring a simple structure and easy operation, making it the internationally popular modern car air conditioning system.
13
1
Share

Does the 6-Year Vehicle Inspection Exemption Include the 6th Year?

Automobile 6-year inspection exemption does not include the 6th year. Below is relevant information about the 6-year inspection exemption: 1. Definition: The "6-year inspection exemption" does not mean no inspection is required for 6 years, but rather that new vehicles are exempt from on-site inspections within 6 years. Therefore, vehicle owners must still apply for an annual inspection compliance sticker every two years as required. For new vehicles, under normal circumstances, they can enjoy the "exemption from on-site inspection" benefit up to 2 times within 6 years, excluding the 6th year. Vehicles with 6 seats or fewer that meet the exemption requirements can directly process the annual inspection online. Upon approval, the annual inspection sticker will be delivered to you by express mail, and you only need to pay the shipping fee. 2. Overdue Inspection: The consequences of overdue inspection are severe. Even if it's just one day late, if caught by traffic police, you will face a 3-point deduction, and in some cases, the vehicle may be temporarily impounded. More importantly, in the event of a traffic accident, even with insurance, the insurance company may refuse to compensate.
5
3
Share

What are the reasons for half of the BMW X1's rear taillight not working?

Here are the reasons why half of the BMW X1's rear taillight is not working: 1. Reasons: The bulb may be burnt out, wiring may be overheating, the relay or combination switch may be damaged, the wiring may be open, the fuse may be blown, or there may be poor contact. 2. Inspection: When encountering a situation where the taillight is not working, pay attention to whether it's one light not working or both lights not working. If both lights are not working, it is highly likely to be a wiring issue or a problem with the relay switch. If only one light is not working while the other is functioning, it is most likely a bulb failure or poor contact. Car circuits are very complex; when problems arise, you can go to a repair shop and have a mechanic use a multimeter to test and identify which part is faulty. Some older cars may have aging wiring, which can lead to short circuits and cause issues.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.