Why do cars need to be fueled with gas?

1 Answers
ORowan
07/30/25 9:55am
Refueling cars with gas involves using natural gas as fuel, primarily for taxis and buses. Private cars cannot pass annual inspections after modification, but once modified, they can be fueled with natural gas to run on it. Taxis are fueled with CNG (Compressed Natural Gas). Related information: 1. Introduction: CNG can be sourced not only from natural gas fields but also from artificially produced biogas. Some city buses also run on this type of gas. LNG is Liquefied Natural Gas, which turns into CNG (Gasified Natural Gas) after vaporization. 2. Precautions: During refueling, the pressure in the gas cylinder increases from low to high, posing certain risks. When refueling at a gas station, all electrical devices and the engine should be turned off to prevent sparks caused by static electricity or short circuits, which could lead to explosions. It is advisable for gas-fueled cars to carry a fire extinguisher, as it can be very useful in emergencies. In summer, avoid keeping flammable or explosive items in the cabin, such as lighters.
Was this review help?
3
3
Share
More Forum Discussions

What is the tune function on a car?

The tune button on a car is used to adjust the audio system. Here are the specific details about the car's tune button: 1. Adjustable systems: The tune button on a car is used to configure the audio system settings, primarily adjusting bass balance, treble balance, left-right balance, front-rear balance, and SVC (Speed-sensitive Volume Control). 2. Purpose: It is typically located among the right-side buttons on the car's audio control panel. After use, it allows the car's audio system to play audio with different sound effects. The most common uses are two: one is to lock out-of-tune segments and correct the pitch when playing audio, and the other is to apply special effects to vocals. 3. Usage method: Follow the audio display screen, press the button to adjust to the desired sound effect.
8
5
Share

What is the reason for the missing rear seat belt buckle?

Car rear seat belt buckles are usually located on the inner side of the seats. It might just be that you haven't found the position yet. Here is a detailed introduction to car rear seat belt buckles: 1. Function of the belt buckle: The rear seat belt buckle in a car serves to protect the safety of passengers, especially when driving on highways where rear passengers need to fasten their seat belts. A seat belt buckle is a device that can be inserted into the car's seat belt socket, preventing the seat belt warning alarm from sounding when the driver is not wearing the seat belt. These buckles come in a variety of designs. 2. Function of the seat belt: The seat belt is the only guarantee of the driver's safety while driving, serving as an active safety measure. Even when driving at relatively low speeds, in the event of a collision or emergency braking, although the generated inertial force is relatively small, it is still enough to prevent the driver and passengers from controlling their bodies, leading to collisions with hard components such as the steering wheel and windshield, causing bodily harm.
3
5
Share

How to Avoid Stalling While Driving

Methods to avoid stalling while driving: When pressing the clutch pedal, ensure it is fully depressed. Gradually release the clutch pedal while feeling the vehicle's vibration and movement tendency. Once the vehicle slightly vibrates and shows signs of moving, gently apply the accelerator while continuing to slowly release the clutch pedal until it is completely released, ensuring a smooth start. Tips for novice drivers: 1. New drivers must display a learner's sign when driving; 2. Practice finding the clutch engagement point of your vehicle and master its exact position, slowing down the clutch release speed; 3. Maintain a calm mindset while driving, avoiding nervousness, excitement, or panic. Clearly distinguish between the accelerator, brake, and clutch to ensure safe driving.
13
0
Share

How to Properly Use Hill Start Assist in a Car?

Correct usage of the hill start assist function in a car is as follows: When parked on a slope with the gear in drive position, release the brake pedal and the HAC will automatically activate. The Hill Start Assist Control (HAC) is a function derived from the ESP system, allowing the vehicle to start on an incline without using the handbrake and preventing rollback. The driver can remove their right foot from the brake pedal while the vehicle maintains braking for several seconds. The car's hill start assist system is typically integrated with the Electronic Stability Program (ESP). If the vehicle's ESP remains enabled, the hill start assist function will also stay activated by default. The ESP can essentially be considered as the on/off switch for the hill start assist feature.
14
3
Share

How to Change the Oil in a Mercedes 9-Speed Transmission?

Mercedes 9-Speed Transmission Oil Change Steps: 1. Secure the vehicle on a lift and remove the central and rear underbody panels of the engine; 2. Use tools to detach the quick-release locks on the oil pan, and replace the transmission oil filter along with the oil pan; 3. Add approximately 6L of transmission oil to the transmission. A completely drained transmission requires about 10L of transmission oil; 4. Finally, clean the oil pan and reinstall all removed components. The Mercedes E300 is a mid-to-large-sized sedan produced by Mercedes-Benz, featuring a front-end design identical to the imported version, with sharp lines for the separate high and low beams, creating a youthful and dynamic overall effect. In terms of body dimensions, it measures 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm, making it a four-door, five-seater sedan.
7
0
Share

What Causes the Black Screen of the Car's Central Control Display?

There are two main reasons for the black screen of the car's central control display: 1. Unstable power voltage in the car; 2. Issues with the cables on the back of the central control display. The car's central control is the area that manages comfort and entertainment devices such as the air conditioning and audio system. The central control includes the central locking system, allowing the driver to control the vehicle's door switches and window lift system. The central locking system primarily has three functions: central control, speed control, and individual control. The driver can operate all door locks, and the doors automatically lock when the vehicle reaches a certain speed. Additionally, the driver's door has an independent switch, enabling individual control of their own door.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.