Why Do Cars Experience Tire Wear?

2 Answers
OJordan
07/28/25 7:43pm
Cars experience tire wear for the following reasons: 1. Tire wear refers to abnormal tire wear, often caused by deviations in the camber or toe angles, resulting in uneven tire contact with the ground. 2. Generally, this issue can be resolved through wheel balancing or four-wheel alignment. However, if the vehicle has been involved in an accident that damaged components like the rear axle—though not visibly apparent—four-wheel alignment may not suffice. In such cases, chassis alignment equipment or replacement of parts is necessary. Additional details are as follows: 1. Tires are components mounted on metal rims that support the vehicle's weight, absorb shocks during driving, and ensure contact between the car and the road. They withstand various deformation loads and extreme temperatures, offering strong load-bearing capacity, high wear resistance, and low rolling resistance. 2. As one of the most critical components of a car, tires ensure driving safety and play a vital role. Without tires, a car cannot operate on the road, making them an essential part that requires regular maintenance.
Was this review help?
6
0
Share
IsaacMarie
08/12/25 12:38am
I've been driving a taxi for over ten years and have seen plenty of tire wear issues. There are several common causes: Incorrect wheel alignment is the primary problem, as improper wheel angles directly lead to excessive wear on one side. Abnormal tire pressure is also crucial—too high and the center wears quickly, too low and the edges suffer severe wear. Poor wheel balancing causes significant vibration when driving, inevitably leading to uneven tire wear over time. Suspension system issues, such as loose ball joints or damaged shock absorbers, can also cause tires to wear unevenly. Additionally, frequent hard braking and sharp turns significantly damage tires. These causes all require careful inspection. Abnormal tire wear isn't just a waste of money—it seriously affects driving safety, especially noticeable at highway speeds.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on Emgrand GL?

Turn off the ignition switch. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch. After approximately 3 seconds, release the two arrow buttons. The maintenance menu will appear, asking if you want to reset. Press and hold the SET button for more than 3 seconds. Press the MODE button. Turn off the ignition switch to complete the reset. Below are related introductions: 1. After each maintenance, you can ask the staff to help reset it. Staff usually use a computer to access the vehicle system settings to reset the maintenance light. 2. You can also refer to the vehicle user manual, which provides detailed instructions. 3. As driving time increases, the wear and tear of internal vehicle components gradually becomes more severe. To ensure normal vehicle operation, manufacturers have set up reminder indicators. After reaching a certain mileage, the vehicle will display a wrench-shaped maintenance light to remind the owner to perform maintenance.
20
0
Share

What are the symptoms of a bad rear wheel bearing?

There are three main symptoms when a rear wheel bearing fails: 1. Driving noise: Noise is the most prominent sign of a damaged wheel bearing, manifesting as a "humming" or buzzing sound during vehicle operation. 2. Vehicle vibration: If the bearing damage becomes severe, causing increased clearance, noticeable body vibration will occur during high-speed driving. 3. Unstable driving: When the front wheel bearing is excessively damaged, it may lead to unstable vehicle movement and erratic power delivery during high-speed operation. As the core component supporting vehicle weight and enabling wheel rotation, wheel bearings operate in extremely harsh conditions. They must endure driving pressures, vibrations, as well as exposure to rainwater and road debris. Even the highest quality wheel bearings cannot guarantee permanent durability under such demanding circumstances.
18
3
Share

What Causes Steering Wheel Friction Noise?

Insufficient lubrication in the thrust bearing, looseness in the stabilizer bar bushings, or excessively dirty power steering fluid can all cause noise. Here are the detailed explanations: Thrust Bearing Insufficient Lubrication: If you notice abnormal noises coming from outside the vehicle when turning the steering wheel, it could be due to insufficient lubrication in the shock absorber's thrust bearing. Stabilizer Bar Bushings Looseness: If the noise is not from the shock absorber's thrust bearing, check for looseness or damage in the stabilizer bar bushings. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving over uneven roads. Excessively Dirty Power Steering Fluid: If the power steering fluid is too dirty, it increases the pressure in the power steering system, leading to a "buzzing" noise from the power steering pump. It is essential to replace the power steering fluid promptly.
11
1
Share

What is required to renew a motorcycle driver's license?

To renew a motorcycle driver's license, you need to bring the corresponding supporting documents to the relevant department for processing. Below is a detailed introduction to the methods for renewing a motorcycle driver's license: 1. Required documents: "Motor Vehicle Driver's License Application Form"; identity proof of the motor vehicle driver; motor vehicle driver's license; a medical certificate issued by a county-level or above medical institution or a military medical institution at the regimental level or above regarding physical conditions. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate regarding physical conditions issued by a specialized medical institution designated by the provincial health authority must be submitted. 2. Others: The motor vehicle driver or their agent should bring the above documents to the vehicle management office to complete the renewal procedures for an expired motor vehicle driver's license. The vehicle management office of the traffic management department of the public security authority where the motor vehicle driver's license was issued.
11
1
Share

Is an insurance policy still required for vehicle inspection now?

Currently, an insurance policy is required for vehicle inspection. Below are the key points to note for the annual inspection: 1. Required documents: Vehicle registration certificate, duplicate copy of the compulsory traffic accident liability insurance policy, warning triangle, and fire extinguisher. (Vehicle violations must be resolved, and no modifications are allowed on the vehicle body.) 2. Document explanation: The compulsory traffic accident liability insurance policy consists of two pages—the original and the duplicate. If the vehicle is purchased through installment payments and the original policy is not available, a photocopy of the policy (stamped by the insurance company) and an insurance card must be provided along with a valid reason. The duplicate copy of the policy must be submitted during the inspection and will be retained by the inspection agency. 3. Bring personal identification and a photocopy of the ID. The driver who takes the vehicle for inspection must carry their ID card, and both the original and photocopy are required. The photocopy should be neatly trimmed along the edges. For company vehicles, the agent's identification is required.
19
3
Share

Which brand uses the 'Tang' style emblem on its vehicles?

The 'Tang' emblem belongs to BYD's Dynasty series models. Below is relevant information about the 'Tang' model: 1. High Safety: The Tang can be considered BYD's pride and joy, boasting exceptional safety performance. In the C-IASI (China Insurance Automotive Safety Index) crash tests, the Tang achieved G (Good) ratings across all categories including roof strength, 25% small overlap frontal collision, and occupant protection, earning it the nickname 'Road Tank'. 2. Outstanding Performance: Currently, the Tang new energy version comes in two variants - Tang EV and Tang DM. The Tang EV is a luxury-tech dual flagship pure electric SUV equipped with an electric four-wheel drive system, capable of accelerating from 0-100km/h in just 4.4 seconds with instant power delivery. Its pure electric performance is exceptionally prominent, offering a comprehensive driving range of approximately 500KM under standard conditions.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.