Why Do Brazilian Cars Run on Alcohol?

2 Answers
Reyes
07/25/25 2:46pm
Brazil has a large sugarcane production, and the use of sugarcane to produce alcohol helps alleviate the shortage of energy minerals. Ethanol, commonly known as alcohol, can be used as a fuel for cars. In 1902, the Deutz gas engine factory specifically used pure ethanol as fuel for one-third of its heavy locomotives. Subsequently, from 1925 to 1945, ethanol was added to gasoline as an anti-knock agent. It can be said that safety and cleanliness are the main advantages of ethanol. Below is an introduction to gasoline compression ratios: 90-octane gasoline: for gasoline cars with an engine compression ratio below 8.5. 92-octane gasoline: for gasoline cars with an engine compression ratio between 8.6 and 9.9. 95-octane gasoline: for gasoline cars with an engine compression ratio between 10.0 and 11.5. 98-octane gasoline: for gasoline cars with an engine compression ratio above 11.6.
Was this review help?
14
2
Share
DeArcher
08/11/25 9:12pm
As an environmental enthusiast, I'm particularly concerned about sustainable mobility. Why do Brazilian cars use alcohol fuel? Mainly because ethanol is a renewable resource extracted from sugarcane, which can replace gasoline, reducing carbon emissions and dependence on petroleum imports. Brazil is rich in sugarcane and started promoting this decades ago, helping to lower air pollution and benefit the planet. From my perspective, this green energy is not only cost-effective but also makes driving quieter and more refreshing. In the long run, it can also encourage global innovation in clean fuels. We should promote more policies like this instead of relying on fossil fuels, making transportation more eco-friendly and efficient. Such changes gradually integrate into daily life, bringing everyone greater peace of mind.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

What brand are the tires on the Hyundai Mistra?

The tires on the Hyundai Mistra are of the Nexen brand, with a tire specification of 205/60R16. The Hyundai Mistra is a new mid-to-high-end sedan from Beijing Hyundai, with body dimensions of 4710mm in length, 1820mm in width, and 1470mm in height. The Hyundai Mistra is equipped with two different displacement engines: 1.8L and 2.0L. The 1.8L engine has a maximum power of 107kw and a maximum torque of 175nm, while the 2.0L engine has a maximum power of 114kw and a maximum torque of 194nm. In terms of appearance, the Hyundai Mistra further deepens the fluidic sculpture design language, particularly adopting a wide grille bar design similar to that of the Santa Fe, and will be equipped with lenses, with frosted silver and chrome line decorations inside the headlights.
13
1
Share

Does the new Sylphy have ISOFIX interfaces?

The new Sylphy is equipped with ISOFIX interfaces, located at the gap between the backrest and cushion of the rear seats, as well as at the upper rear part of the seats. The installation using the ISOFIX fixing method is relatively simple: just align the ISOFIX interface of the child safety seat with the reserved slots on the seat and insert it, then extend the support leg to complete the secure installation. The new Sylphy is a compact sedan with body dimensions of 4641mm in length, 1815mm in width, and 1450mm in height. It is powered by a 1.6-liter naturally aspirated engine across all variants, delivering a maximum horsepower of 139 HP, a maximum power of 102 kW, and a maximum torque of 169 Nm. In terms of transmission, the new Sylphy offers a choice between a 5-speed manual and a CVT continuously variable transmission.
7
0
Share

What Causes Excessive Noise in Magotan Vehicles?

Magotan vehicle excessive noise causes: 1. Engine misfire noise, mainly referring to one or more cylinders not functioning properly; 2. Deterioration or loosening of engine mounts, which are rubber blocks between the engine and the frame; 3. Overly rich air-fuel mixture. The Magotan is a mid-size sedan launched by FAW-Volkswagen, with body dimensions of 4865mm in length, 1832mm in width, 1471mm in height, and a wheelbase of 2871mm. In terms of appearance, the Magotan adopts the brand's new family design language. The chrome trim on the front grille features a new design, with obsidian elements added to the horizontal chrome strips, giving the front face a more refined look.
2
3
Share

What is the method for throttle body matching?

Methods for throttle body matching: 1. Turn the ignition key on and off several times in succession, and the vehicle's onboard computer will delete the original throttle body's memory; 2. Store the new throttle body's data, start the vehicle, and once it runs normally, the matching is complete. Successful throttle body matching requires ensuring that all other vehicle components are functioning properly. The throttle body is a controllable valve that regulates air intake into the engine. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to produce work. The throttle body is connected to the air filter at the top and the engine block at the bottom, and is often referred to as the throat of the automobile engine.
1
3
Share

Where is the keyhole for the Envision?

The keyhole for the Envision is located at the rear end of the driver's side door handle, which is a hidden keyhole. The Envision is a mid-size SUV produced by SAIC-GM Buick, with body dimensions of 4686mm in length, 1839mm in width, and 1691mm in height. The Envision offers a choice between a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter version is equipped with a 7-speed dual-clutch transmission across all models, while the 2.0-liter version comes with a 9-speed automatic transmission. In terms of exterior design, the Envision features a new wing-shaped chrome trim that runs through the LED wing-shaped headlights, widening the horizontal visual effect. The dynamic bumper surfaces and three-dimensional silver lower guard plate create a full and powerful front end.
19
2
Share

How to Read Car Tire Model Numbers?

Reading car tire model numbers involves the following steps: 1. The letter 'P' or no letter indicates it is a passenger car tire; 2. The letter 'R' signifies a radial tire; 3. The ECE certification mark and number indicate the tire complies with the European Economic Commission standards for pneumatic tires; 4. The tire pressure information shows the maximum allowable tire pressure; 5. The tread wear indicator marked with 'TWI' indicates the location of the tire's tread wear indicators. Car tires are one of the essential components of a vehicle, directly in contact with the road surface. They work together with the car's suspension system to absorb shocks during driving, ensuring good ride comfort and smooth driving performance.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.