Why Do American-Spec Cars Have Two Yellow Lights?

1 Answers
LeChristian
07/29/25 10:01pm
Because U.S. traffic regulations require all vehicles to have these two lights, which are not merely decorative additions. These are vehicle width marker lights, designed to help drivers of other vehicles gauge the width of the car ahead or behind. Many U.S. interstate highways lack street lighting, so these marker lights not only aid visibility but also enhance safety. Additional relevant details are as follows: 1. American-Spec Cars: These are vehicles manufactured in compliance with U.S. road safety regulations, primarily for the American market. Since China and Europe do not have such regulations, these two orange marker lights are rarely seen on European-spec or Chinese-spec cars. In fact, many domestic car models in China have phased out width marker lights in favor of daytime running lights, which serve a similar purpose. Daytime running lights are brighter, cannot be turned off, and thus offer superior safety. 2. Most Chinese Roads Have Street Lighting: Even rural roads in China are typically equipped with streetlights, so there is little need for width marker lights. For the Chinese market, this feature is considered an optional rather than essential configuration.
Was this review help?
8
3
Share
More Forum Discussions

What are the pros and cons of ETC?

Regarding the pros and cons of ETC, they are as follows: 1. Benefits: (1) You can use dedicated lanes at toll stations without preparing change or getting out of the car to take a ticket, saving time. (2) There is a certain discount on toll fees, reducing travel costs. 2. Drawbacks: (1) To apply for ETC, you must go to a bank or a partnered institution and provide valid information such as ID documents. Many banks require applying for a credit card together, which poses certain risks to information security. (2) ETC vehicles may also encounter the issue of being 'tagged' by others. Some drivers, to evade highway tolls, target vehicles equipped with ETC and follow closely behind them to pass through toll gates. This behavior is very dangerous, as it may lead to rear-end collisions. Additionally, vehicles involved in such 'tagging' may be blacklisted.
19
4
Share

Can I take the driver's license test without glasses if I wore them in the photo?

If you are nearsighted when applying for a driver's license, you can choose to wear glasses or not in the provided photo. However, you must submit relevant medical proof to confirm that your vision meets the permissible range for driver's license application. Below is relevant information about wearing glasses during the test: 1. Vision requirements: According to the 'Regulations on the Administration of Motor Vehicle Driver's Licenses of the People's Republic of China,' applicants for a motor vehicle driver's license must have a visual acuity of no less than 0.7 on the standard vision chart or 4.9 on the logarithmic vision chart (corrected vision is allowed). After passing the medical examination and successfully registering, whether during driving lessons, the test, or driving after passing the test, you must wear glasses while operating a motor vehicle. 2. Physical conditions for applying for a motor vehicle driver's license: (1) For applying for a large passenger vehicle, large truck, or trolleybus driver's license, the height must be no less than 155 cm; for other vehicle types, the height must be no less than 150 cm. (2) The visual acuity must be no less than 0.7 on the standard vision chart or 4.9 on the logarithmic vision chart (corrected vision is allowed).
17
5
Share

Are All Scratches on Black Cars White Marks?

Generally, yes. In such cases, professional paint repair is required. The white marks are actually the primer. Below is an introduction to car body paint: 1. Introduction One: The car body paint consists of four layers, from the inside to the outside: the electrocoat layer, the primer layer, the basecoat layer, and the clearcoat layer. The electrocoat layer is mainly used for rust prevention. 2. Introduction Two: Above the electrocoat layer is the primer layer, which primarily serves to prevent rust and also enhances adhesion to the next layer of body paint. 3. Introduction Three: Above the primer layer is the basecoat layer, which mainly serves an aesthetic purpose. The various car colors we usually see are presented by the basecoat layer. 4. Introduction Four: The outermost layer of paint is the clearcoat layer, which is actually a transparent paint. 5. Introduction Five: The basecoat layer can enhance the glossiness of the car body paint and protect the basecoat layer.
15
4
Share

Is there a fee for the second appointment of Subject 3?

There is a fee for the second appointment of Subject 3. Below is relevant information about Subject 3: 1. Introduction: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license examination. It is the abbreviated term for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Test Content: The road driving skills test for Subject 3 generally includes: vehicle preparation, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
17
3
Share

Will putting feet on the dashboard result in penalty points for the front passenger?

Currently, there are no explicit regulations issued regarding the sitting posture of front passengers. As long as the front passenger fastens the seatbelt as required, even behaviors such as lying down and placing feet on the dashboard will not be penalized. Below is additional information: 1. Hazards: However, this posture in a moving vehicle is not only indecorous but also extremely dangerous. In a rapidly moving vehicle, in the event of a collision, the person may first slide downward, and the airbag, which can deploy at speeds of 100 to 220 miles per hour within 0.03 seconds, may force the knees toward the face. 2. Holding a child in the front passenger seat: If traffic police find a front passenger holding a young child, they may impose a fine. This behavior is highly dangerous, and it is recommended that young children sit in child safety seats in the rear.
4
2
Share

How to distinguish between the big V and small V of the Reiz?

The method to distinguish between the big V and small V of the Reiz is based on their engine displacement: the big V has a 3.0L displacement, while the small V has a 2.5L displacement. Below is some related information about the Reiz: 1. Introduction: The Reiz is the domestic name for the Japanese Toyota MARK-X model, produced at Tianjin FAW Toyota Plant No. 2 on the same production line as the Crown, sharing the same chassis and equipped with the same six-speed automatic transmission as the Crown. 2. Representative models: The MARK-X is the successor to the MARK-II, featuring a front-engine, rear-wheel-drive design. It comes with Toyota's advanced, reliable, and durable 2500CC V6 and 3000CC V6 engines, as well as a finely crafted and highly complex six-speed automatic transmission, including a stylish manual/automatic serpentine gear shift panel system and a rear-wheel-drive system.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.