Why did the sunroof of my Volkswagen suddenly stop closing?

1 Answers
LorenzoAnn
07/30/25 1:08am
The sunroof will stop when it is close to the fully open position. Press and release the control button again to fully open the sunroof. Press and release to close the sunroof shade. The sunroof shade will stop when it is halfway closed. Press and release to close the tilted or open sunroof. If the anti-pinch sunroof or sunroof shade encounters an obstacle while closing, it will retract a certain distance.
Was this review help?
20
1
Share
More Forum Discussions

How Long Can Vehicle Annual Inspection Be Postponed?

Vehicle annual inspection cannot be postponed. Vehicle owners must undergo the inspection within the specified time frame. Motor vehicles can participate in the annual inspection up to 3 months before the expiration date. If a vehicle fails to undergo the mandatory safety technical inspection within the prescribed period, the public security traffic management department will issue a warning or impose a fine. Only after paying the fine can the annual inspection be conducted. Consequences of failing to attend the annual inspection on time: 1. Vehicles that have not undergone the annual inspection on time are not allowed on the road; 2. Driving a vehicle without timely annual inspection will result in 3 penalty points and a fine; 3. If a traffic accident occurs involving a vehicle that has not undergone the annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate; 4. Driving without timely annual inspection is considered illegal driving and may result in vehicle impoundment; 5. According to the mandatory vehicle scrappage standards, if a motor vehicle fails to obtain the inspection compliance mark for 3 consecutive inspection cycles after the expiration of the inspection validity period, it will be forcibly scrapped.
11
3
Share

What does adaptive high-beam and low-beam headlights mean?

Adaptive high-beam and low-beam headlights are a front lighting system that can automatically change between high and low beams to adapt to changing driving conditions. The vehicle's headlights use sensors to detect oncoming or same-direction vehicles or pedestrians, automatically switching between high and low beams, allowing the driver to focus more on driving without frequently adjusting the headlights. Applicable scenarios: 1. When driving in urban areas with speed restrictions, it can produce a wider light pattern, effectively avoiding potential accidents with pedestrians or vehicles suddenly appearing at intersections; 2. When the vehicle enters a curve, it generates a rotating light pattern, providing sufficient illumination for the curve; 3. On highways, the headlights illuminate farther and wider compared to rural roads; 4. In rainy or overcast weather, it reduces the light intensity in areas that may cause glare for oncoming vehicles.
11
1
Share

What is the reason for the malfunction of the Mercedes-Benz C-class co-pilot window?

Reasons for the malfunction of the co-pilot window lift: circuit failure; deformation or damage of the glass mud slot; loose screws of the lift; damage to the window lift; deviation in the installation position of the guide rail. The recovery methods are introduced as follows: Recovery methods: You can try disconnecting the power supply and reconnecting it to see if it recovers. In addition, you can also inspect the circuit; clean or replace the glass; replace the window lift. Precautions: To prevent rainwater from flowing in, there is a rubber strip on the interior window frame. After the glass is soiled, the friction with the rubber strip increases, and the switch will also be affected, so the glass needs to be kept clean frequently. Small cards are often inserted into the window gaps. If not handled properly, the cards may fall into the door along the window. The internal structure of the door is complex, and the falling of the cards into the door can cause a series of chain reactions, such as damage to the window lift, door malfunction, and blockage of the drainage port.
20
0
Share

Is AMT an Automatic Transmission?

AMT is an automatic transmission. The AMT gearbox, also known as an automatic transmission, is the abbreviation for Automated Manual Transmission. It is an automatic shifting system controlled by a microcomputer, based on a dry clutch and gear transmission. With an AMT-equipped vehicle, there's no need to press the clutch pedal; the driver can operate the vehicle simply by pressing the accelerator pedal. For example, a semi-automatic transmission shares a basic mechanical structure similar to a manual transmission, where the clutch inside the gearbox retains the traditional manual arrangement but is controlled by a computer. The driver only needs to shift gears without managing the clutch. AMT is a modification of the original mechanical transmission, primarily altering the manual shifting control part. Without changing the overall transmission structure, it achieves automated gear shifting by adding a microcomputer-controlled automatic operating system.
19
0
Share

What are the indicators for vehicle exhaust emission testing?

Vehicle exhaust emission testing standards: The limit for carbon monoxide is 6.3g/km, and the total limit for hydrocarbons and nitrogen oxides is 2.0g/km. Details are as follows: 1. The vehicle exhaust emission test is based on whether the smoke opacity value meets the standard, and whether the emissions meet the standard is primarily determined by the vehicle testing data, with the smoke opacity value confirming compliance; 2. Annual inspections for passenger cars include exhaust emission testing. After the external inspection during the annual vehicle inspection, the first test conducted is to check if the exhaust emissions meet environmental standards; 3. If the exhaust emission values do not meet the standards, the annual inspection will not pass. It is recommended to first have the vehicle tested at a familiar auto repair shop before proceeding with the official annual inspection.
2
2
Share

How to Set Cruise Control on the Elantra?

To set cruise control on the Elantra: First, maintain a speed above 40km/h, then press the cruise control activation button while releasing the accelerator pedal, and finally press the "SET" button to complete the setting. Below is some information about the Elantra: 1. Powertrain: The Elantra is equipped with a 1.6L engine and a 1.8L engine. The 1.6L engine delivers a maximum power of 127 horsepower and a maximum torque of 155N·m, while the 1.8L engine features the latest Nu technology, producing a maximum power of 145 horsepower and a maximum torque of 175N·m. 2. Transmission: It is paired with a 6-speed manual transmission and a 6-speed automatic transmission.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.