Why did the dashboard brightness of Honda CR-V suddenly dim?

Should You Press the Clutch or Brake First When Decelerating?

Whether to press the brake or clutch first when decelerating can be determined based on different situations. The scenario where you press the brake first and then the clutch is: when the speed is high and you need to decelerate, you should press the brake first. Once the speed drops to an appropriate level, press the clutch, shift to a lower gear, and use the engine to decelerate. The scenario where you press the clutch first and then the brake is: when the speed is low and you need to decelerate, press the clutch first and then the brake. The purpose of this is that at low speeds, pressing the brake first can easily cause the engine to stall, and pressing the clutch first can avoid this situation. The functions of the clutch include: 1. Gradually increasing the driving force of the car for a smooth start; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impact from the engine and extending the life of the transmission gears.

10

5

Share

What causes the anti-skid light to illuminate in the Nissan Patrol?

The anti-skid light illuminates due to sensor malfunction. Sensor failure, or potential navigation interference causing tire slippage, may lead the vehicle to determine possible loss of control. Use a computer to inspect the ABS sensor and clear the fault; resolving the ABS light will turn off the anti-skid light. Below are two possibilities regarding system faults: 1. Only the ABS warning light is on: If only the ABS warning light illuminates while driving, it indicates a fault in the ABS system, but the car can still rely on the conventional braking system. Professional inspection should be sought as soon as possible. 2. Both the ABS warning light and the brake system warning light are on: If both the ABS warning light and the brake system warning light illuminate simultaneously while driving, it indicates faults in both the ABS and brake systems, leading to altered braking characteristics. In the latter case, you must stop driving immediately, check the brake fluid level. If the fluid level is at the "min" mark, do not continue driving and seek professional inspection. If the fluid level is normal, it may indicate an ABS system fault, meaning the ABS regulation function has failed, leaving only the ordinary braking system operational. This can cause the rear wheels to lock up more quickly during braking, leading to skidding. Drive cautiously in this situation and seek repairs as soon as possible.

9

5

Share

What is the MIIT fuel consumption of the Hongqi H5?

The Hongqi H5 currently has 6 models on sale. Among them, the Hongqi H5-2022 1.8T Automatic Zhilian Qichang and Qiling versions, as well as the facelifted 1.8T Automatic Zhilian Qiyun and Qixiang versions (4 models in total) equipped with a 197 horsepower engine, have an NEDC fuel consumption of 6.4L per 100km. The Hongqi H5-2022 1.5T-DCT Qiyue and Qiyun versions (2 models) equipped with a 169 horsepower engine have an NEDC fuel consumption of 6.2L per 100km. The fuel tank capacity is the same across different Hongqi H5 models. The driving range on a full tank is as follows: For models with the 197 horsepower engine, the fuel tank capacity is 55L, giving a driving range of 55/6.4*100=859km on a full tank. For models with the 169 horsepower engine, the fuel tank capacity is 55L, giving a driving range of 55/6.2*100=887km on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and ambient temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically mean greater power output, requiring more gasoline for combustion. Heavier vehicles also tend to have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low ambient temperatures: When the engine block is cold during startup, injected gasoline is less likely to atomize, requiring more fuel for combustion and thus increasing consumption. Additionally, the engine control unit may command higher idle speeds to warm up the engine in cold weather, further increasing fuel consumption.

19

1

Share

What is the Difference Between Double Wishbone and Single Wishbone?

Single wishbone vehicles generally have a longer body compared to double wishbone vehicles. Double wishbone vehicles feature upper and lower crossbeams in the large arm, welded into a frame structure, while single wishbone vehicles have a single crossbeam structure in the middle. Due to the sufficient strength of the crossbeam, the structural strength and rigidity of the single wishbone are also excellent. The single wishbone is superior to the double wishbone. Because the single wishbone has only one force-bearing point, its force distribution is more uniform and stronger. Fewer components also result in a lower failure rate. Below are some differences between double wishbone and single wishbone: Structure: Double wishbone vehicles have upper and lower crossbeams in the large arm, welded into a frame structure, while single wishbone vehicles have a single crossbeam structure in the middle. Advantages: The biggest advantage of double wishbone vehicles is their flexibility, making them more suitable for narrow spaces. Single wishbone structures are simpler to manufacture, easier to correct for deformation after welding, and provide better visibility for the driver. Application Market: China's first-generation loaders used double wishbone structures, while current production vehicles mostly use single wishbone structures. High-end loaders also adopt single wishbone designs.

4

1

Share

2009 Santana EFI experiencing weak acceleration during sudden acceleration?

2009 Santana EFI experiencing weak acceleration during sudden acceleration may be due to a dirty throttle body or a dirty fuel filter. Relevant information about the Santana is as follows: 1. Exterior: The Overcomer has made some improvements based on the Santana 2000. In terms of appearance, the Overcomer basically inherits the mantle of its predecessor, the Santana 2000. To sum it up in one sentence: a complete change. The so-called complete change, the most proud part of this car is the improvement of the front: at first glance, you might think there are not many changes to its appearance. However, the front face has changed more noticeably, with the grille becoming wider and thicker, featuring the classic Volkswagen V-shaped smile. A major improvement in the front face of this car is the fully integrated headlights, with the spherical shape of the high beam in the middle, creating a harmonious look. The headlight illumination system uses round projection lamps, with a horizontal strip-shaped position light at the bottom of the headlight, reflecting light from all directions, which improves safety at night with better illumination. The engine hood has been redesigned, with the front edge protruding, giving it a full look. The taillights also feature a new design: the integrated taillight cover has a simple and clear color layout, the license plate has been moved down to the newly designed rear bumper, emphasizing a more stable visual effect; the high-brightness Volkswagen logo once again becomes the center of the entire visual; the position of the side anti-scratch strips has been appropriately lowered, eliminating the metal trim anti-scratch panel below the waistline of the Santana model, replaced by a new bright trim at the lower edge of the door panel, making the side look more stable. 2. Interior: The light-colored leather interior, matching the exterior, though not yet luxurious, has a soft design that is absolutely eye-catching. The leather seats have improved inclusivity compared to the predecessor, and the Passat-style three-spoke steering wheel and the simple yet elegant lines of the center console give a well-organized feeling. The layout design of other parts on the center console has basically not changed, but the workmanship has improved, with buttons and knobs feeling comfortable to the touch. In terms of seating space, the Overcomer basically continues the design concept of the Santana 2000, with the rear seats adding a retractable central armrest. The Overcomer provides the driver with a left-side dual-curvature exterior rearview mirror, making the driving view wider and effectively improving driving safety. The electric trunk opening switch uses the latest coded wireless technology.

19

1

Share

Can You Drive Normally with Engine Knock?

Engine knock prevents normal driving. The causes of engine knock include: 1. Carbon deposits: If the fuel in the engine does not burn completely, carbon deposits will form; 2. Overheating engine: Prolonged intense driving can cause the engine to overheat; 3. Poor fuel quality: Using low-quality fuel significantly reduces anti-knock properties, making the engine prone to knocking; 4. Ignition disorder: If the car's ignition system malfunctions, causing ignition to occur before the piston reaches the correct position, it will result in abnormal engine vibration.

20

4

Share

Why did the dashboard brightness of Honda CR-V suddenly dim?

Should You Press the Clutch or Brake First When Decelerating?

What causes the anti-skid light to illuminate in the Nissan Patrol?

What is the MIIT fuel consumption of the Hongqi H5?

What is the Difference Between Double Wishbone and Single Wishbone?

2009 Santana EFI experiencing weak acceleration during sudden acceleration?

Can You Drive Normally with Engine Knock?

Is There a Catalytic Converter in the Mid-Section of the Exhaust?

Where is the Baojun engine produced?

Will water enter if it reaches just below the door edge?

What engine is used in the BAIC Senova X35?