Why Did the Car Display Screen Suddenly Stop Working?

1 Answers
RubyFitz
07/30/25 9:27am
The reasons why the car display screen suddenly stops working are: 1. The DVD encountered lag during operation; 2. Recently downloaded software is incompatible with the system; 3. Screen cable failure or a crash caused by IC and motherboard malfunctions; 4. The software version was not updated in time or is outdated. The car display screen is located on the car's center console and primarily displays car audio, navigation, vehicle information, reverse camera footage, etc. It comes in single-touch and multi-touch LCD versions. Precautions for using the car display screen: 1. Ensure cables are plugged or unplugged only when the power is off; 2. To ensure the stability and safety of the electrical components, the interval between turning the device on and off should be no less than 6 seconds; 3. During use or storage, be careful with the LCD screen's polarizing film to avoid scratches from hard objects.
Was this review help?
20
2
Share
More Forum Discussions

What causes high idle speed in BYD F3?

The main reasons for increased idle speed in BYD F3 include: excessive air intake, excessive fuel injection, or incorrect engine control signals. However, a sudden increase in idle speed does not necessarily indicate a vehicle malfunction. It is important to conduct timely inspections and repairs to identify the specific issue. Below are the causes of abnormal idle speed: 1. Throttle valve malfunction: A dirty throttle valve can cause errors in the throttle opening angle, reducing its sensitivity. During idle, the throttle may not close properly, leading to abnormal idle speed. Additionally, throttle valve issues can affect engine power, acceleration performance, and fuel consumption. In severe cases, it may even cause difficulties in starting the engine. 2. Idle speed control valve malfunction: A faulty idle speed control valve can prevent proper adjustment of idle speed, leading to unstable idle, difficulty in cold starts, and other issues. In severe cases, the engine may not idle at all and stall when the accelerator is released. 3. Sensor malfunction: Faulty sensors can cause the engine control unit (ECU) to make incorrect judgments, or the ECU itself may malfunction, resulting in abnormal engine idle speed.
9
1
Share

Will blending clear coat damage the original paint?

It has minimal impact. The purpose of blending clear coat is to harmonize the color between the repaired area and the surrounding sections, enhancing the gloss of the repaired area to make differences less noticeable. Blending clear coat is sprayed at the junction of new and old paint surfaces to blend them together, serving as a transition to reduce color discrepancies. Extended content: Instructions for using blending clear coat: 1. Mixing ratio: Ready to use without mixing. 2. Spray gun pressure and tools: Gravity feed spray gun with 2bar pressure, nozzle size 1.2-1.5mm; suction feed spray gun with nozzle size 1.4-1.7mm. 3. Application method: After completing the paint repair, lightly spray blending clear coat once at the junction area, then wait 15 seconds and lightly spray again. 4. Suitable for: 2K topcoat, two-component clear coat. 5. Not suitable for: 1K basecoat. 6. Storage life: Can be stored for over 2 years with tight lid sealing, storage temperature at 20°C.
16
0
Share

Should the Prado use 0w20 or 5w30?

The Prado requires the use of 5w30 viscosity engine oil, as 0w20 viscosity oil is too low for its engine. The domestic version of the Prado is equipped with a 3.5-liter naturally aspirated V6 engine, while the Middle Eastern version features a 4.0-liter naturally aspirated engine. These engines are large-displacement, multi-cylinder naturally aspirated units, hence requiring 30 viscosity oil. Here are the relevant details: 1. Using the appropriate oil: During normal engine operation, the oil forms a protective film on the surfaces of various engine components, reducing wear and friction between parts. If the oil viscosity is too low, it cannot maintain a stable protective film during operation, which can accelerate engine wear. Engines operate at high temperatures, and low-viscosity oil tends to thin out under these conditions, making it unsuitable. 2. Oil specifications: The 'w' in oil grades stands for 'winter.' The number before 'w' indicates the oil's low-temperature flow performance. For example, 0w oil can flow normally at -35°C, while 5w oil can flow at -30°C. The number after 'w' represents the oil's high-temperature viscosity—the higher the number, the higher the viscosity. When purchasing oil, focus on the number after 'w' and choose the viscosity that best suits your vehicle's engine.
10
1
Share

Can a C2 Driver's License Drive a Lamborghini Sports Car?

Can a C2 driver's license drive a Lamborghini sports car? Below are the relevant details: 1. C2 driver's license: Typically refers to a C2 driving license, which permits driving small and micro passenger vehicles, as well as light and micro automatic transmission cargo vehicles. Compared to a C1 license, the range of vehicles allowed by a C2 license is somewhat narrower, limited to its own permitted vehicle types and those allowed by a C5 driving license. 2. Vehicles not permitted by a C1 driving license: Large buses, tractors, city buses, medium-sized buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.
15
5
Share

Where is the central gateway of the 2013 Mercedes-Benz A180 located?

The central gateway of the 2013 Mercedes-Benz A180 is located under the steering wheel. Below are specific details about Mercedes-Benz vehicles: 1. Historical Background: Mercedes-Benz, a German luxury car brand, is the inventor of the automobile and is considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous car and brand logos in the world. 2. Model Introduction: Mercedes-Benz currently mainly produces C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class vehicles (SUV off-road vehicles).
3
2
Share

What is the ground clearance of the GLC?

The minimum ground clearance of the Mercedes-Benz GLC is 180mm. The Mercedes-Benz GLC is the first all-new crossover model launched by Mercedes-Benz, positioned as a mid-size SUV. Here are the relevant details about the Mercedes-Benz GLC: 1. Exterior: It offers two optional packages and a variety of wheel rim styles. The most significant change in the L version is the noticeable extension between the B/C pillars, with the letter L added after the tail badge to indicate its extended version identity. Additionally, the GLC long-wheelbase version will be available in 11 body colors, further meeting consumers' demand for personalization. 2. Interior: The classic double-barrel instrument cluster, with red pointers and target ring patterns, combined with the simple wood-grain lacquered central control panel and the 3-color adjustable ambient lighting system, creates a luxurious atmosphere inside the vehicle. 3. Powertrain: The Mercedes-Benz GLC is equipped with a 2.0T turbocharged engine across the lineup, delivering a maximum horsepower of 240Ps and a maximum power of 370KW. Paired with a 9-speed automatic transmission, the official combined fuel consumption ranges between 7.2-7.6L per 100 kilometers. It offers strong performance with relatively low fuel consumption, making it highly fuel-efficient.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.