Why did the Buick Regal 652t stop production?

1 Answers
EvanLee
07/29/25 2:54pm
Because buyers seeking sportiness with the 2.0T engine would go straight for the GS model, those prioritizing comfort would choose the LaCrosse, and budget-conscious buyers wanting a large car would opt for the 1.5T version. The Buick Regal 652t suffered from poor sales. 1. Configuration: The 652T Elite trim features leather seats with refined and comfortable textures. Other standard equipment includes 6 SRS airbags, rear parking sensors, leather-wrapped steering wheel, power sunroof, and touchscreen infotainment system, delivering mainstream vehicle quality. 2. Engine: The LSY engine is a 2.0-liter turbocharged four-cylinder unit. In the LaCrosse, this LSY engine produces 237 horsepower and 350 N·m of maximum torque, with peak power achieved at 5,000 rpm and maximum torque available between 1,500-4,000 rpm.
Was this review help?
6
4
Share
More Forum Discussions

Why is the Audi Q3 consuming so much fuel?

Components that may cause high fuel consumption in the Audi Q3 include: 1. Tires; 2. Engine; 3. Oxygen sensor; 4. Certain engine control units. Solutions for high fuel consumption are: 1. Ensure fuel efficiency: Regular maintenance and inspections are essential, and any issues should be addressed immediately; 2. Reduce vehicle weight: Regularly clean the trunk and avoid carrying unnecessary items in the car; 3. Correct improper driving habits: For automatic transmissions, ease off the accelerator when the RPM reaches between 2000 and 3500; 4. Avoid coasting in neutral: Coasting in neutral consumes idle fuel, which is equivalent to the fuel consumption of driving at 60 kilometers per hour.
9
4
Share

What Are Paddle Shifters For?

Automatic gear shift paddles are located behind the left and right sides of the steering wheel, where the windshield wipers and turn signals are usually placed, and are used for shifting gears. Here are the specific details: 1. Function: Gear shift paddles are devices installed on semi-automatic car clutches, designed to shift gears without pressing the clutch pedal, simply by pulling the paddles. This feature is widely used in racing cars. 2. Advantage: As a quick shifting device, gear shift paddles can significantly enhance driving operability. They are typically positioned behind the steering wheel. When using the paddles, drivers usually only need to shift into D, S, or manual mode. With paddle shifters, drivers can upshift or downshift without taking their hands off the steering wheel.
12
5
Share

What is the reason for the Haval H6 air conditioner not cooling?

Haval H6 air conditioner not cooling is due to air conditioning system failure, and it is necessary to go to the 4S store for repair in time. The following is a related introduction about the Haval H6: 1. Introduction: The Haval H6 is the flagship model under the Haval brand. On August 25, 2011, the Haval H6, positioned as an urban intelligent SUV, was grandly launched at the Great Wall Motors Tianjin new factory, offering Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, divided into three versions: Urban, Elite, and Premium. 2. Highlights: The Haval H6 is positioned as a city SUV. In terms of drive form, the Haval H6 has two modes: two-wheel drive and four-wheel drive. The H6 is built on a new platform different from the previous H3 and H5, with the main feature being the use of a monocoque body. The four-wheel-drive model of the H6 uses a real-time four-wheel-drive system, rather than the body-on-frame + part-time four-wheel-drive system adopted by the H3 and H5. Although this affects its off-road performance to a certain extent, the benefits are that it can reduce body weight to improve economy and provide better ride comfort. As it is built on a new platform, the two-wheel-drive version of the Haval H6 adopts front-wheel drive. This is also different from the rear-wheel-drive mode used by the two-wheel-drive models of the H3 and H5.
7
0
Share

How to Deal with Small Dents Caused by Hail?

Here is a detailed introduction to the methods for repairing small dents: 1. Repair of dents in single-layer body metal panels: Use a wooden or plastic hammer to gently tap from the back of the dent, while placing a suitable wooden block against the outer side of the metal panel to prevent the hammer's impact from bending the surrounding area of the dent. 2. Repair of dents in laminated metal panels: The drilling method is suitable for small dents, as it causes minimal damage to the sheet metal and paint. Drill a row of small holes in the dented or wrinkled area using a hand drill, with the diameter and spacing of the holes determined by the condition of the deformed outer panel. The pull-ring method is suitable for larger damaged areas, reducing the damage to the sheet metal caused by excessive perforations. Insert into the small holes and pull them outward one by one until the original shape is fully restored. During pulling, each hand can hold two pull rods, applying even and consistent force, pulling slowly without excessive force. After leveling, use carbon dioxide gas shielded welding to weld the holes shut.
17
3
Share

What is the valve adjustment sequence for a four-cylinder diesel engine?

For valve clearance adjustment in a 4-cylinder engine, there is a commonly used mnemonic: "double, exhaust, no, intake." However, different types of engines may have variations in the positions of their intake and exhaust valves, leading to differences in the valve clearance adjustment sequence. It's crucial to avoid incorrect adjustments. Here are the details: 1. Valve adjustment sequence and method: Taking a 4-cylinder engine with a known firing order of 1-3-4-2 as an example. First, position cylinder 1 at the compression top dead center (TDC) and adjust its valves. Then, rotate the engine crankshaft 180 degrees to place cylinder 3 at the intake bottom dead center (BDC) and adjust the clearance. Rotate the crankshaft another 180 degrees to move cylinder 4 to the exhaust top dead center (TDC) and adjust the clearance. Finally, position cylinder 2 at the power top dead center (TDC) and adjust the clearance. 2. Adjustment precautions: Besides the adjustment sequence, the size of the valve clearance is also critical. If the valve clearance is too small, the valves may not close properly, reducing engine power. If the clearance is too large, it increases the impact frequency on the valve train components, accelerating wear. It can also delay valve opening, causing the engine to operate improperly and lose power.
14
4
Share

How to Set Up the Auto-Lock Feature on the Mondeo?

To set up the auto-lock feature on the Mondeo, follow these steps: place the gear in the P position, turn the key to the ON position, ensure all four doors are closed, press the lock button, and observe the hazard warning lights flashing twice on the instrument panel to confirm the operation is complete. Below is an introduction to the auto-lock feature: 1. Function of auto-lock: The auto-lock feature serves as an anti-theft measure, quickly locking the doors after driving to prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security. 2. Pros and cons of auto-lock: Advantages include protecting child passengers inside the vehicle by preventing them from opening the door handles while the car is in motion. The disadvantage is that it may affect emergency escape.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.